ABSTRACT Varying bead concentrations over the course of experiments have been reported by many scientists. A new device was designed and fabricated to eliminate bead aggregation in a syringe pump prior to flowing through a microchannel. We have molded the effects of rotation in the absence of longitudinal flow by evenly populating the cross section of a syringe with particles, then tracking their movement due to rotation, gravity, and centripetal forces. We have shown both experimentally and numerically that the concentration of the beads remains constant over the course of experiments once the rotational device is used. However, the concentration of the beads drops significantly once no rotation is applied during the experiment.
Cite this paper
Yang, J. , Howell, P. and Hashemi, N. (2012) Effect of a rotating frame on preventing bead aggregation in a microfluidic device. Advances in Bioscience and Biotechnology, 3, 603-608. doi: 10.4236/abb.2012.35078.
 Youngsil Ha, Joo-Sung Kim, Timothy P. Denny, and Mark A. Schell, “A Rapid, Sensitive Assay for Ralstonia solanacearum Race 3 Biovar 2 in Plant and Soil Samples Using Magnetic Beads and Real-Time PCR” Plant Disease, 96:2, 258-264, 2012
 Yoshiaki Okada, Tomoko Y. Takano, Nozomi Kobayashi, Arisa Hayashi, Masaaki Yonekura, Yuji Nishiyama, Tomohiro Abe, Takuya Yoshida, Takao A. Yamamoto, Satoshi Seino, and Takefumi Doi, “New Protein Purification System Using Gold-Magnetic Beads and a Novel Peptide Tag, the Methionine Tag”, Bioconjugate Chemistry, 22 (5), 887-893, 2011
 Lawrence Sasso, Ian Johnston, Mingde Zheng, Rohit Gupte, Akif ündar, and Jeffrey Zahn, “Automated microfluidic processing platform for multiplexed magnetic bead immunoassays”, Microfluidics and Nanofluidics, DOI 10.1007/s10404-012-0980-0
 Mirian Hervás, Miguel A. López, and Alberto Escarpa, “Electrochemical immunosensing on board microfluidic chip platforms”, TrAC Trends in Analytical Chemistry 31 (0), 109, 2012
 Nastaran Hashemi, Peter B. Howell, Jr., Jeffrey S. Erickson, Joel P. Golden and Frances S. Ligler, “Dynamic reversibility of hydrodynamic focusing for recycling sheath fluid”, Lab on a Chip, 10, 1952-1959, 2010
 Natalya V. Zaytseva, Vasiliy N. Goral, Richard A. Montagna, and Antje J. Baeumner, “Development of a microfluidic biosensor module for pathogen detection”, Lab on a Chip 5 (8), 805, 2005
 A.K. Price, and B.M. Paegel, “ROBOTS: Rapid On-Bead Oligomer-Target Screening”, 15th International Conference on Miniaturized Systems for Chemistry and Life Sciences, October 2-6, 2011, Seattle, Washington, USA
 T. Lund-Olesen, H. Bruus, M.F. Hansen, "Passive Magnetic Separator Integrated with Microfluidic Mixer: Demonstration of Enhanced Capture Efficiency," Micro Electro Mechanical Systems, MEMS 2006 Istanbul. 19th IEEE International Conference, 386-389, 2006
 J.H. Ferziger, and M. Peric, “Computational Methods for Fluid Dynamics”, 3rd ed. Springer 2002
 C.J. Detzel, M.R. Thorson, B.J. Van Wie, and C.F. Ivory, “A study of the Coriolis effect on the fluid flow profile in a centrifugal bioreactor”, Biotechnology Progress, 25(4): 1025–1034, 2009
 T. G. Hammond and J. M. Hammond, “Optimized suspension culture: the rotating-wall vessel”, American Journal of Physiology, 281:(1) F12-F25, 2001
 Zhou Shuaiwen, “Photocatalytic treatment of wastewater contaminated with organic waste and heavy metal from semiconductor industry”, National University of Singapore, Thesis, 2004.