JSEA  Vol.5 No.9 , September 2012
Analyses and Modeling of Laminar Flow in Pipes Using Numerical Approach
ABSTRACT
This paper investigate some important works done on numerical analysis and modeling of laminar flow in pipes. This review is focused on some methods of approach and the analytical tools used in analyzing of the important parameters to be considered in laminar flow; such as frictional losses, heat transfer etc. in laminar flow in pipes of different shapes, and the importance of laminar flow in its areas of applications. Prominent researchers have approached this from different perspectives. Some carried out analysis on the pressure drop as a function of permeability, some worked on friction factor analysis, some discussed heat transfer effects of laminar flow in the entrance region, while some discussed its applications in various industries. Some of these works were done considering a given form of pipe configuration or shape which is circular pipes. Only a few, of the literature reviewed have related their considerations to different forms of pipes. Most consider pipes to be majorly circular in shape, but in industries today some circular pipes have become elliptical in shape due to long time usage of the pipes, which would have contributed to increase in some different forms of losses in the industries. In engineering, efficiency and effectiveness improvement is the major goal, if a research work has been done, considering the important parameters in laminar flow showing their effects on different forms of pipe configuration as a result of pipe deformation due to usage, huge amount of money will be saved. This will show clearly how the efficiency of a given circular pipe has seriously been affected due to deformation, and the level of loss this has resulted to.

Cite this paper
O. Ismail and G. Adewoye, "Analyses and Modeling of Laminar Flow in Pipes Using Numerical Approach," Journal of Software Engineering and Applications, Vol. 5 No. 9, 2012, pp. 653-658. doi: 10.4236/jsea.2012.59076.
References
[1]   M. Z. Rad, A. Nouri-Broujerdi and J. Seume, “Numerical Computation of Compressible Laminar Flow with Heat Transfer in the Entrance Region of a Pipe,” Proceeding of 2008 ASME Summer Heat Transfer Conference HT, Jacksonville, 10-14 August 2008.

[2]   A. Nouri-Broujerdi and M. Ziaei-Rad, “Simulation of Compressible Pipe Flow under Different Thermal Conditions,” 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference, Vancouver, 8-12 July 2007.

[3]   A. Nouri-Borujerdi and M. Layeghi, “A Numerical Analysis of Vapor Flow in Concentric Annular Heat Pipes,” Transactions of the ASME, Journal of Fluids Engineering, Vol. 126, 2004, pp. 442-448. doi:10.1115/1.1760549

[4]   V. M. Soundalgekar and V. G. Divekar, “Laminar Slip-Flow through a Uniform Circular Pipe with Small Suction,” Publication de l’Institut Mathematique, Nouvelle Serie, Vol. 16, No. 30, 1993, pp. 147-157.

[5]   T. Zhao and P. Cheng, “A Numerical Solution of Laminar Forced Convection in a Heated Pipe Subjected to a Reciprocating Flow,” International Journal Heat Mass Transfer, Vol. 38, No. 16, 1995, pp. 3011-3022. doi:10.1016/0017-9310(95)00017-4

[6]   S. K. Karode, “Laminar Flow in Channels with Porous Walls, Revisited,” Journal of Membrane Science, Vol. 191, No. 1, 2001, pp. 237-241. doi:10.1016/S0376-7388(01)00546-4

[7]   F. A. R. Pereira1, C. H. Ataíde and M. A. S. Barrozo, “CFD Approach Using a Discrete Phase Model for Annular Flow Analysis,” Latin American Applied Research, Vol. 40, No. 1, 2010.

[8]   A. Raoufpanah, “Effect of Slip Condition on the Characteristic of Flow in Ice Melting Process,” International Journal of Engineering, Vol. 18, No. 3, 2005, pp. 1-9.

[9]   A. Nouri-Borujerdi and P. Javidmand, “Critical Mass Flow Rate through Capillary Tubes,” Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, 1-5 August 2010.

[10]   A. Nouri and A. Nabovati, “Numerical Study of Viscous Dissipation in Circular Microchannels,” 8th International and 12th Annual Mechanical Engineering Conference, Tarbiat Modarres University, Tehran, 2008.

[11]   W, J. Federspie and I. Valenti, “Laminar Flow in Micro-Fabricated Channels with Partial Semi-Circular Profiles,” Open Journal of Applied Sciences, Vol. 2, No. 1, 2012, pp. 28-34. doi:10.4236/ojapps.2012.21003

[12]   R. Yang and S. F. Chang, “A Numerical Study of Fully Developed Laminar Flow and Heat Transfer in a Curved Pipe with Arbitrary Curvature Ratio,” International Journal of Heat and Fluid Flow, Vol. 14, No. 2, 1993, pp. 138-145. doi:10.1016/0142-727X(93)90021-E

[13]   I. Sarbu and A. Iosif, “Numerical Analysis of the Laminar Forced Heat Convection between Two Coaxial Cylinders,” International Journal of Energy, Vol. 3, No. 4, 2009.

[14]   N. Yucel and N. Dinler, “Numerical Study on Laminar and Turbulent Flow through a Pipe with Fins Attached,” An International Journal of Computation and Methodology, Vol. 49, No. 2, 2006, pp. 195-214.

[15]   M. A. Cade, W. C. P. B. Lima, S. R. Farias Neto and A. G. B. Lima, “Natural Gas Laminar Flow in Elliptic Cylindrical Pipes: A Numerical Study,” Brazilian Journal of Petroleum and Gas, Vol. 4, No. 1, 2010, pp. 19-33.

[16]   M. Yazdi and A. Bardi, “Estimation of Friction Factor in Pipe Flow Using Artificial Neural Networks,” Canadian Journal on Automation, Control & Intelligent Systems, Vol. 2, No. 4, 2011, pp. 52-56.

[17]   A. Mussa, P. Asinari and L.-S. Luo, “Lattice Boltzmann Simulations of 2D Laminar Flows past Two Tandem Cylinders,” Elsevier Science, New York, 2008.

[18]   M. S. Ghidaoui and A. A. Kolyshkin, “A Quasi-Steady Approach to the Instability of Time-Dependent Flows in Pipes,” Journal of Fluid Mechanics, Vol. 465, 2002, pp. 301-330. doi:10.1017/S0022112002001076

[19]   G. Catania and S. Sorrentino, “Analysis of Frequency-Dependent Friction in Transient Pipe Flow Using Non-Integer Order Derivative Models,” Laboratory of Research and Technology Transfer LAV (Laboratory of Acoustics and Vibration), University of Bologna, Bologna, 2007, pp. 1-8.

[20]   M. Bahrami, M. M. Yovanovich and J. R. Culham, “Pressure Drop of Fully-Developed, Laminar Flow in Micro-Channels of Arbitrary Cross-Section,” Proceedings of ICMM 2005 3rd International Conference on Microchannels and Minichannels, Toronto, 13-15 June 2005.

[21]   Z. G. Makukula, P. Sibanda and S. S. Motsa, “A Novel Numerical Technique for Two-Dimensional Laminar Flow between Two Moving Porous Walls,” Hindawi Publishing Corporation Mathematical Problems in Engineering, Vol. 2010, 2010, Article ID: 528956.

[22]   S. Selvarajan, E .G. Tulapurkara and V. V. Ram, “A Numerical Study of Flow through Wavy-Walled Channels,” International Journal for Numerical Methods in Fluids, Vol. 26, 1998, pp. 519-531. doi:10.1002/(SICI)1097-0363(19980315)26:5<519::AID-FLD630>3.0.CO;2-C

[23]   M. S. Favero and K. R. Berquist, “Use of Laminar Air-Flow Equipment in Microbiology,” Applied Microbiology Copyright @ 1968 American Society for Microbiology, Vol. 16, No. 1, 1968, pp. 182-183.

[24]   D. G. Fox, “A Study of the Application of Laminar Flow. Ventilation to Operating Rooms,” Public Health Monograph No. 78, US Government Printing Office, Washington, 1969, 58 p.

[25]   H.-D. Chen, L. Wen, S.-Y. Zheng, H. Gao, B. Xiong, H.-N. Bian, Z.-A. Liu and L.-J. Wel, “Application of Laminar Air Flow Techniques in Burn Treatment,” Department of Burn Surgery, People’s Hospital of Guangdong Province, Guangzhou, 2005.

 
 
Top