ABSTRACT The current cam and follower mechanism in four stroke internal combustion engine employs a flat follower. In this work an attempt is made to change the flat face of follower to a curved face follower, so that the required point contact can be achieved. As line contact between existing cam and follower mechanism results in high frictional losses which results in low mechanical efficiency. It is observed that the frequency of vibration in the existing and modified cam and follower mechanism remains almost same. The finite element approach is used to perform the analysis.
Cite this paper
M. Mali, P. Maskar, S. Gawande and J. Bagi, "Design Optimization of Cam & Follower Mechanism of an Internal Combustion Engine for Improving the Engine Efficiency," Modern Mechanical Engineering, Vol. 2 No. 3, 2012, pp. 114-119. doi: 10.4236/mme.2012.23014.
 H. Heisler, “Advanced Engine Technology,” 2nd Edition, Butterworth-Heinmann, Oxford, 2002.
 M. Husselman, “Modelling and Verification of Valve Train Dynamics in Engines,” M.Sc. Thesis, Stellenbosch University, Stellenbosch, 2005.
 R. L. Norton and R. G. Mosier, “Cam Design and Manufacturing Handbook,” Industrial Press, Inc., New York, 2002.
 J. W. David, C. Y. Cheng, T. D. Choi, C.T. Kelley and J. Gablonsky, “Optimal Design of High Speed Mechanical Systems,” North Carolina State University, Raleigh, Tech. Rep. CRSC-TR97-18, 1997
 T. D. Choi, C. T. Eslinger, O. J. Kelley, J. W. David and M. Etheridge, “Optimization of Automotive Valve Train Components with Implicit Filtering,” Optimization and Engineering, Vol. 1, No. 1, 2000, pp. 9-27.doi:10.1023/A:1010071821464
 A. Cardona, E. Lens and N. Nigro, “Optimal Design of Cams,” Multibody System Dynamics, Vol. 7, No. 3, 2002, pp. 285-305. doi:10.1023/A:1015278213069
 W. J. Kim, H. S. Jeon and Y. S. Park, “Contact Force Prediction and Experimental Verification on an OHC Finger-follower type Cam valve System,” Experimental Mechanics, Vol. 31, No. 2, 1991, pp. 150-156.doi:10.1007/BF02327568
 H.S Jeon, K. J. Park and Y.-S. Park, “An Optimal Cam Profile Design Considering Dynamic Characteristics of a Cam valve System,” Experimental Mechanics, Vol. 29, No. 4, 1989, pp. 357-363. doi:10.1007/BF02323851
 M. Teodorescu, M. Kushwaha, H. Rahnejat and D. Taraza, “Elastodynamic transient analysis of a four-cylinder valve train system with camshaft flexibility,” Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics, Vol. 219, No. 1, 2005, pp. 13-25. doi:10.1243/146441905X9962
 K. M. Chin, “Design and Kinematics Analysis of Cam-Follower System,” Proceedings of International Conference on Sustainable Development: Issues and Prospects for the GMS, London, 12-14 November 2008, pp. 12-14.
 H. D. Desai and V. K. Patel, “Computer Aided Kinematic and Dynamic Analysis of Cam and Follower,” Proceedings of the World Congress on Engineering, London, 30 June-2 July 2010, pp. 1-6.
 Y. L. Lai, J. P. Hung and J. H. Chen, “Roller Guide Design and Manufacturing for Spatial Cylindrical Cams,” World Academy of Science, Engineering and Technology, Vol. 38, 2008, pp. 142-148.
 M. R. M. Rejab, M. M. Rahman, Z. Hamedon, M. S. M. Sani, M. M. Noor and K. Kadirgama, “An Evaluation of Profiles for Disk Cams with In-line Roller Followers,” Proceedings of MSTC08, Kuala Lumpur City Centre, Malaysia, 16-17 December 2008, pp. 608-614.