JBiSE  Vol.3 No.7 , July 2010
Thermal analysis of different tips for various operating modes of phacoemulsification system
ABSTRACT
Cataract is an opacity that develops in the crystalline lens of the eye, due to alteration in some of its protein fibers, with the consequent impairment of visual acuity. The most effective and common treatment is to surgically remove the cloudy lens. In this process the crystalline lens are removed and the eye’s refraction power is restored by inserting an artificial lens. Pha- coemulsification refers to modern cataract surgery in which the eye’s internal lens is emulsified with an ultrasonic hand piece, and aspirated from the eye. Aspirated fluids are replaced with irrigation of balanced salt solution, thus maintaining the anterior chamber, as well as cooling the hand piece. The patient can be released soon after the operation. The problem of this procedure in some cases is thermal damage. This research addresses the aforementioned problem through an important parameter, different operating modes of the system. The proposed in-vitro approach has been investigated in details.

Cite this paper
nullTahvildari, R. , Fattahi, H. and Amjadi, A. (2010) Thermal analysis of different tips for various operating modes of phacoemulsification system. Journal of Biomedical Science and Engineering, 3, 727-734. doi: 10.4236/jbise.2010.37097.
References
[1]   Bond, L.J., Flake, M.D. and Tucker, B.J. (2003) Physics of phacoemulsification. World Conference on Ultrasound, Paris .

[2]   Packer, M., Fishkind, W.J., Howard Fine, I. and Hoffman, R.S. (2005) The physics of phaco: A review. Journal of Cataract & Refractive Surgery, 31(2), 424-431.

[3]   Corvi, A., Innocenti, B. and Mencucci, R., (2006) Thermography used for analysis and comparison of different cataract surgery procedures based on phacoemulsification. Physiological Measurements, 27(4), 371-384.

[4]   Yow, L. and Basti, S. (1997) Physical and mechanical principles of phacoemulsification and their cilinical relevance. Indian Journal of Ophthalmology, 45(4), 241-249.

[5]   Osher, R.H. and Injev, V.P. (2006) Thermal study of bare tips with various system parameters and incision. Journal of Cataract & Refractive Surgery, 32(5), 867-872.

[6]   Jones, L.D. and Chin, A.F. (1991) Electronic instruments and measurements, Prentice-Hall, New Jersey, 300-303.

[7]   Maloney, W.F., Grindle, L. and Fallbrook (1988) Textbook of phacoemulsification. Lasenda Publishers, California.

[8]   Aali-Payam Co., (2006) Instruction manual of phaco system. Sina Model, Tehran, 23-24.

[9]   Ernest, P., Rhem, M., McDermott, M. and Lavery, K. (2001) Phacoemulsification conditions resulting in thermal wound injury,” Journal of Cataract & Refractive Surgery, 27(11), 1829-1839.

[10]   Tahvildari, R., Fattahi, H. and Amjadi, A. (2008) An in- vitro Measurement of Temperature Changes in Phacoe- mulsification System during Different modes. Proceedings of the 2nd International Conference on Bioinforma- tics and Biomedical Engineering, Shanghai, 1569-1574.

[11]   Tahvildari, R., Fattahi, H. and Amjadi, A. (2007) Thermal damage invesigation on Cataract surgery by Ultrasound waves. Proceedings of the 15th Annual Physics Conference of Iran, Yasuj, 433-436.

 
 
Top