MSA  Vol.3 No.8 , August 2012
Roughness Control of Layer-by-Layer and Alternative Spray Films from Congo Red and PAH via Laser Light Irradiation
ABSTRACT
Films from congo red (CR) alternated with poly(allylamine hydrochloride), PAH, were prepared by layer-by-layer and alternative spray techniques. In order to investigate the change of roughness induced by laser light irradiation (532 nm), both kinds of films were characterized by using UV-visible spectroscopy and atomic force microscopy (AFM). At dif- ferent irradiation times, layer-by-layer, LbL, films showed small changes in the roughness and irregular behavior, whereas spray films exhibited higher and a regular decreasing of roughness with increasing irradiation time. The higher roughness of spray films as compared with the LbL ones was attributed to different formation mechanisms of the films. The decreasing of the roughness as a function of the irradiation time (exhibited by the spray films) was associated to surface relaxation due to the interplay between photoisomerization of congo red dye and the heating of the sample during the laser light irradiation. The results suggested that the alternative spray technique is the best choose to control of roughness of the films by using light irradiation.

Cite this paper
G. Cardoso, R. Silva, R. Maciel, N. Souza and J. Silva, "Roughness Control of Layer-by-Layer and Alternative Spray Films from Congo Red and PAH via Laser Light Irradiation," Materials Sciences and Applications, Vol. 3 No. 8, 2012, pp. 552-556. doi: 10.4236/msa.2012.38078.
References
[1]   R. H. El Halabieh, O. Mermut and C. J. Barret, “Using Light to Control Physical Properties of Polymers and Surfaces with Azobenzene Chromophores,” Pure and Applied Chemistry, Vol. 76, No. 7-8, 2004, pp. 1445-1465. doi:10.1351/pac200476071445

[2]   G. Groenhof, M. F. Lensink, H. J. C. Berendsen, J. G. Snijders and A. E. Mark, “Signal Transduction in the Photoactive Yellow Protein. I. Photon Absorption and the Isomerization of the Chromophore,” Proteins: Structure, Function, and Genetics, Vol. 48, No. 2, 2002, pp. 202- 211. doi:10.1002/prot.10136

[3]   J. Yang, J. Y. Zhang, H. Liu, P. Wang, H. Ma, H. Ming, Z. C. Li and Q. J. Zhang, “Holographic Grating Recording in Azobenzene Polymer ?lms,” Optical Materials, Vol. 27, No. 3, 2004, pp. 527-532. doi:10.1016/j.optmat.2004.04.013

[4]   J. R. Silva, F. F. Dall’Agnol, N. C. de Souza, O. N. Oliveira and J. A. Giacometti, “Photoinduced Birefringence at Low Temperatures in Langmuir-Blodgett Films of Azobenzene-Functionalized Copolymers,” Synthetic Metals, Vol. 138 No. 1-2, 2003, pp. 153-156. doi:10.1016/S0379-6779(02)01273-0

[5]   J. R. Silva, N. C. Souza, D. S. dos Santos Jr., et al., “Morphology Changes Induced by Laser Irradiation on Disperse Red 13 Films Prepared by Physical Vapor Deposition,” Synthetic Metals, Vol. 137, No. 1-3, 2003, pp. 1477-1478. doi:10.1016/S0379-6779(02)01196-7

[6]   C. R. Mendon?a, A. Dhanabalan, D. T. Balogh, et al., “Optically Induced Birefringence and Surface Relief Gratings in Composite Langmuir-Blodgett (LB) Films of Poly[4’-[[2-(Methacryloyloxy)Ethyl]Ethylamino]-2-Chloro-4-Nitroazobenzene] (HPDR13) and Cadmium Stearate,” Macromolecules, Vol. 32, No. 5, 1999, pp. 1493-1499. doi:10.1021/ma981644i

[7]   Z. Sekkat, J. Wood, Y. Geerds, A. ElMeskini, M. Buchel and W. Knoll, “Organized Photochromic Azo-Polymeric Structures: Self-Assembled and Langmuir-Blodgett-Kuhn Layers,” Synthetic Metals, Vol. 81, No. 2-3, 1996, pp. 281-285. doi:10.1016/S0379-6779(96)03739-3

[8]   J. Meng, A. Natansohn and P. Rochon, “Azo Polymers for Reversible Optical Storage. 11 Poly{4,4’-(1-Methylethylidene)Bisphenylene 3-[4-(4-Nitrophenylazo)Phenyl]- 3-Aza-Pentanedioate},” Journal of Polymer Science Part B: Polymer Physics, Vol. 34, 1996, pp. 1461-1466. DOI:10.1002/(SICI)1099-0488(199606)34:8<1461::AID-POLB9>3.0.CO;2-V

[9]   G. Decher, “Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites,” Science, Vol. 277, No. 5330, 1997, pp. 1232-1327. doi:10.1126/science.277.5330.1232

[10]   Y. Wang, A. S. Angelatos and F. Caruso, “Template Synthesis of Nanostructured Materials via Layer-by-Layer Assembly,” Materials Chemistry, Vol. 20, No. 3, 2008, pp. 848-858. doi:10.1021/cm7024813

[11]   A. Izquierdo, S. S. Ono, J. C. Voegel, P. Shaaf and G. Decher, “Dipping versus Spraying:? Exploring the Deposition Conditions for Speeding Up Layer-by-Layer Assembly,” Langmuir, Vol. 21, No. 16, 2005, pp. 7558- 7567. doi:10.1021/la047407s

[12]   K. C. Krogman, N. S. Zacharia, S. Schroeder and P. T. Hammond, “Automated Process for Improved Uniformity and Versatility of Layer-by-Layer Deposition,”, Langmuir, Vol. 23, No. 6, 2007, pp. 3137-3141. doi:10.1021/la063085b

[13]   N. C. de Souza, et al., “Influence of Solution Treatment on the Adsorption and Morphology of Poly(o-Methoxy- aniline) Layer-by-Layer Films,” The Journal of Physical Chemistry B, Vol. 108, No. 36, 2004, pp. 13599-13606. doi:10.1021/jp037873a

[14]   T. E. Sladewski, A. M. Shafer and C. M. Hoag, “The Effect of Ionic Strength on the UV-Vis Spectrum of Congo Red in Aqueous Solution,” Spectrochimica Acta Part A, Vol. 65, No. 3-4, 2006, pp. 985-987. doi:10.1016/j.saa.2006.02.003

[15]   M. C. Petty, “Langmuir-Blodgett Films: An Introduction,” Cambridge University Press, Cambridge, 1996. doi:10.1017/CBO9780511622519

[16]   J. B. Brito, D. J. C. Gomes, V. D. Justina, A. M. F. Lima, C. A. Olivati, J. R. Silva and N. C. de Souza, “Nanostructured Films from Phthalocyanine and Carbon Nano- tubes: Surface Morphology and Electrical Characterization,” Journal of Colloid and Interface Science, Vol. 367, No. 1, 2012, pp. 467-471. doi:10.1016/j.jcis.2011.10.004

[17]   A. L. Barabási and H. E. Stanley, “Fractal Concepts in Surface Growth,” Cambridge University Press, Cambridge, 1995

[18]   R. C. Salvarezza, L. Vázquez, P. Herrasti, P. Ocón, J. M. Vara and A. J. Arvia, “Self-Affine Fractal Vapour- Deposited Gold Surfaces Characterization by Scanning Tunnelling Microscopy,” Europhysics Letters, Vol. 20, No. 8, 1992, pp. 727-732. doi:10.1209/0295-5075/20/8/011

[19]   P. Keblinski, A. Maritan, F. Toigo, R. Messier and J. R. Banavar, “Continuum Model for the Growth of Interfaces,” Physical Review E, Vol. 53, No. 1, 1996, pp. 759-778. doi:10.1103/PhysRevE.53.759

[20]   A. Mazor, D. J. Srolovitz, P. S. Hagan and B. G. Bukiet, “Columnar Growth in Thin Films,” Physical Review Letters, Vol. 60, 1988, pp. 424-427. doi:10.1103/PhysRevLett.60.424

 
 
Top