JMMCE  Vol.11 No.8 , August 2012
Drilling of TiO2 and Zns Filled Gfrp Composites
ABSTRACT
In the present work an attempt has been made in order to investigate the drilling behavior of the TiO2 and ZnS filled Glass Fabric Reinforced Polymer Matrix Composites (GFRP). The volume fractions in the matrix were chosen as 1%, 2% and 3%. Drilling has been conducted on a radial drilling machine. Speed of drilling and drill tool diameter were considered as the varying parameters with three levels. Thrust force has been considered as the output parameter and is been measured in each combination of parameters chosen. Results reveal that, the addition of filler will increase the thrust force developed during drilling, also results indicate that, addition of filler will increase thrust force upto 2 volume % of filler thereafter increase in filler content result in almost constant thrust developed. Also it can be observed that, with the increase in drill tool diameter the thrust developed also increases.

Cite this paper
K. Arun, D. Kumar and M. Murugesh, "Drilling of TiO2 and Zns Filled Gfrp Composites," Journal of Minerals and Materials Characterization and Engineering, Vol. 11 No. 8, 2012, pp. 785-789. doi: 10.4236/jmmce.2012.118067.
References
[1]   H. Pihtili and N. Tosun, “Investigation of the Wear Behaviour of a Glass-Fibre-Reinforced Composite and Plain Polyester Resin,” Composites Science and Technology, Vol. 62, No. 3, 2002, pp. 367-370. doi:10.1016/S0266-3538(01)00196-8

[2]   Kishore, P. Sampathkumaran, S. Seetharamu, S. Vyna- theya, A. Murali and R. K. Kumar, “SEM Observations of the Effects of Velocity and Load on the Sliding Wear Characteristics of Glass Fabric-Epoxy Composites with Different Fillers,” Wear, Vol. 237, No. 1, 2000, pp. 20- 27.

[3]   E. Santer and H. Czinchos, “Tribology of Polymers,” Tribology International, Vol. 22, No. 2, 1989, pp. 103- 109. doi:10.1016/0301-679X(89)90170-9

[4]   J. Bijwe and J. Indumathi, “Influence of Fibers and Solid Lubricants on Low Amplitude Oscillating Wear of Polyetherimide Composites,” Wear, Vol. 257, No. 5-6, 2004, pp. 562-572.

[5]   N. Sar? and T. S?nmazcelik, “Erosive Wear Behaviour of Carbon Fibre/Polyetherimide Composites under Low Particle Speed,” Materials & Design, Vol. 28, No. 1, 2007, pp. 351-355. doi:10.1016/j.matdes.2005.05.014

[6]   P. Samyn, J. Quintelier, W. Ost, P. De Baets and G. Schoukens, “Sliding Behaviour of Pure Polyester and Polyester-PTFE Filled Bulk Composites in Overload Conditions,” Polymer Testing, Vol. 24, No. 5, 2005, pp. 588-603. doi:10.1016/j.polymertesting.2005.02.012

[7]   J. Bijwe, J. J. Rajesh, A. Jeyakumar, A. Ghosh and U. S. Tewari, “Influence of Solid Lubricants and Fibre Reinforcement on Wear Behaviour of Polyethersulphone,” Tribology International, Vol. 33, No. 10, 2000, pp. 697- 706. doi:10.1016/S0301-679X(00)00104-3

[8]   L. M. McGrath, R. S. Parnas, S. H. King, J. L. Schroeder, D. A. Fischer and J. L. Lenhart, “Investigation of the Thermal, Mechanical and Fracture Properties of Alumina- Epoxy Composites,” Polymer, Vol. 49, No. 4, 2008, pp. 999-1014. doi:10.1016/j.polymer.2007.12.014

[9]   W. Chen, “Some Experimental Investigations in the Drilling of Carbon Fiber Reinforced Plastic (CFRP) Composite Laminates,” International Journal of Machine Tools and Manufacture, Vol. 37, No. 8, 1997, pp. 1097-1108.

[10]   J. Mathew, N. Ramakrishnan and N. K. Naik, “Investigations into the Effect of Geometry of a Trepanning Tool on Thrust and Torque during Drilling of GFRP Composites,” Journal of Materials Processing Technology, Vol. 91, No. 1-3, 1999, pp. 1-11.

[11]   I. El-Sonbaty, U. A. Khashaba and T. Machaly, “Factors Affecting the Machinability of GFR/Epoxy Composites,” Composite Structures, Vol. 63, No. 3-4, 2004, pp. 329- 338.

[12]   N. S. Mohan, A. Ramachandra, S. M. Kulkarni, “Ma-chining of Fiber-Reinforced Thermoplastics: Influence of Feed and Drill Size on Thrust Force and Torque during Drilling,” Journal of Reinforced Plastics & Composites, Vol. 24, No. 12, 2005, pp. 1247-1257.

 
 
Top