JSEMAT  Vol.2 No.3 A , July 2012
Synthesis of PMMA-co-PMAA Copolymer Brush on Multi-Wall Carbon Nanotubes
ABSTRACT
Poly(methyl methacrylate)/poly(methacrylamide) copolymer (PMMA-co-PMAA) was synthesized by a free radical copolymerization of MMA and MAA monomers in methylethyl ketone using AIBN as radical initiator. Multi-wall carbon nanotubes (MWCNT) were oxidized in KMnO4 acidic suspension. Carboxyl groups on the surface oxidized MWCNT were reacted with primary amide group of PMMA-co-PMAA copolymer in MEK solution under ultrasound to form polymer brush on the surface of MWCNT. With the help of TG analyses the amount of covalently grafted PMMA-co-PMAA copolymer onto MWCNT surface was determined as ?47 wt%. TEM analyses identified thin co-polymer layer adhered onto MWCNT surface with average thickness ?5 nm.

Cite this paper
P. Slobodian, P. Svoboda, P. Riha, R. Boruta and P. Saha, "Synthesis of PMMA-co-PMAA Copolymer Brush on Multi-Wall Carbon Nanotubes," Journal of Surface Engineered Materials and Advanced Technology, Vol. 2 No. 3, 2012, pp. 221-226. doi: 10.4236/jsemat.2012.223034.
References
[1]   H. T. Ham, Y. S. Choi and I. J. Chung, “An Explanation of Dispersion States of Single-Walled Carbon Nanotubes in Solvents and Aqueous Surfactant Solutions Using Solubility Parameters,” Journal of Colloid and Interface Science, Vol. 286, No. 1, 2005, pp. 216-223. doi:10.1016/j.jcis.2005.01.002

[2]   K. A. Narh, L. Jallo and K. Y. Rhee, “The Effect of Carbon Nanotube Agglomeration on the Thermal and Mechanical Properties of Polyethylene Oxide,” Polymer Composites, Vol. 29, No. 7, 2008, pp. 809-817. doi:10.1016/j.jcis.2005.01.002

[3]   P. Slobodian, A. Lengálová, M. ?louf and P. Sáha, “Poly (Methyl Methacrylate)/Multi-Wall Carbon Nanotubes Composites Prepared by Solvent Cast Technique: Composites Electrical Percolation Threshold,” Journal of Reinforced Plastics and Composites, Vol. 26, No. 16, 2007, pp. 1705- 1712. doi:10.1177/0731684407081437

[4]   K. Schulte and A. H. Windle, “Editorial,” Composites Science and Technology, Vol. 67, No. 5, 2007, p. 777. doi:10.1016/j.compscitech.2006.08.020

[5]   L. S. Schadler, S .C. Giannaris and P. M. Ajayan, “Load Transfer in Carbon Nanotube Epoxy Composites,” Applied Physics Letters, Vol. 73, No. 26, 1998, pp. 3842- 3444. doi:10.1063/1.122911

[6]   H. D. Wagner, “Nanotube-Polymer Adhesion: A Mechanics Ap-proach,” Chemical Physics Letters, Vol. 361, No. 1-2, 2002, pp. 57-61. doi:10.1016/S0009-2614(02)00948-X

[7]   M. Wong, M. Paramsothy, X. J. Xu, Y. Ren, S. Li and K. Liao, “Physical Interactions at Carbon Nanotube-Polymer Interface,” Polymer, Vol. 44, No. 25, 2003, pp. 7757- 7764. doi:10.1016/j.polymer.2003.10.011

[8]   A. Rasheed, J. Y. Howe, M. D. Dadmun and P. F. Britt, “The Efficiency of the Oxidation of Carbon Nanofibers with Various Oxidizing Agents,” Carbon, Vol. 45, No. 5, 2007, pp. 1072-1080. doi:10.1016/j.carbon.2006.12.010

[9]   K. Hernadi, A. Siska, L. Thien-Nga, L. Forro and I. Kiricsi, “Reactivity of Different Kinds of Carbon during Oxidative Purification of Catalytically Prepared Carbon Nanotubes,” Solid State Ionics, Vol. 141, 2001, pp. 203-209. doi:10.1016/S0167-2738(01)00789-5

[10]   T. Ramanathan, H. Liu, L. C. Brinson and J. Polym, “Func- tionalized SWNT/Polymer Nanocomposites for Dramatic Property Im-provement,” Journal of Polymer Science Part B: Polymer Physics, Vol. 43, No. 17, 2005, pp. 2269-2279. doi:10.1002/polb.20510

[11]   M. H. Kim, C. K. Hong, S. Choe and S. E. Shim, “Synthesis of Polystyrene Brush on Multiwalled Carbon Nanotubes Treated with KMnO4 in the Presence of a Phase- Transfer Catalyst,” Journal of Polymer Science Part A: Polymer Chemistry, Vol. 45, No. 19, 2007, pp. 4413-4420. doi:10.1002/pola.22190

[12]   J. U. Ha, M. Kim, J. Lee, S. Choe, I. W. Cheong, S. E. Shim, “A Novel Synthesis of polymer Brush on Multiwall Carbon Nanotubes Bearing Terminal Monomeric Unit,” Journal of Polymer Science Part A: Polymer Chemistry, Vol. 44, 2006, pp. 6394-6401. doi:10.1002/pola.22190

[13]   J. W. Xiong, Z. Zheng, X. M. Qin, M. Li, H. Q. Li and X. L. Wang, “The Thermal and Mechanical Properties of a Polyurethane/Multi-Walled Carbon Nanotube Composite,” Carbon, Vol. 44, No. 13, 2006, pp. 2701-2707. doi:10.1016/j.carbon.2006.04.005

[14]   T. Ramanathan, F. T. Fisher, R. S. Ruoff and L. C. Brinson, “Amino-Functionalized Carbon Nanotubes for Binding to Polymers and Biological Systems,” Chemistry of Materials, Vol. 17, No. 6, 2005, pp. 1290-12958. doi:10.1016/j.carbon.2006.04.005

[15]   S. W. Kuo, H. C. Kao and F. C. Chang, “Thermal Behavior and Specific Interaction in High Glass Transition Temperature PMMA Copolymer,” Polymer, Vol. 44, No. 22, 2003, pp. 6873-6882. doi:10.1016/j.polymer.2003.08.026

[16]   C. F. Huang and F. C. Chang, “Comparison of Hydrogen Bonding Interaction between PMMA/PMAA Blends and PMMA-co-PMAA Copolymers,” Polymer, Vol. 44, No. 10, 2003, pp. 2965-2974. doi:10.1016/j.polymer.2003.08.026

[17]   E. O. Kazyuka, A. P. Polikarpov, I. G. Poplevka, Y. I. Matusevich, L. B. Yakitntsova and L .P. Krul, “Thermal Properties of Copolymerization Products of Methyl Metha- crylate with Methacrylamide,” Russian Journal of Applied Chemistry, Vol. 80, No. 11, 2007, pp. 1898-1901. doi:10.1134/S1070427207110237

[18]   J. Brandrup and E. H. Immegut, “Polymer Handbook,” Wiley & Sons Inc., New York, 1989.

[19]   L. Licea-Jimenez, P.Y. Henrio, A. Lund, T. M. Laurie, S. A. Perez-Garcia, L. Nyborg, H. Hassander, H. Bertilsson and R. W. Rychwalski, “MWNT Reinforced Mela-mine- Formaldehyde Containing Alpha-Cellulose,” Composites Science and Technology, Vol. 67, No. 5, 2007, pp. 844- 854. doi:10.1016/j.compscitech.2006.01.031

[20]   J. Zhang, H. L. Zou, Q. Qing, Y. L. Yang, Q. W. Li, Z. F. Liu, X. Y. Guo and Z. L. Du, “Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nano-tubes,” Journal of Physical Chemistry B, Vol. 107, No. 16, 2003, pp. 3712-3718. doi:10.1016/j.compscitech.2006.01.031

[21]   S. T. Kim, H. J. Choi and S. M. Hong, “Bulk Polymerized Polystyrene in the Presence of Multiwalled Carbon Nano-tubes,” Colloid and Polymer Science, Vol. 285, No. 5, 2007, pp. 593-598. doi:10.1016/j.compscitech.2006.01.031

[22]   Y. Wang, S. H. Goh and T. S. Chung, “Miscibility Study of Torlon? Polyam-ide-Imide with Matrimid? 5218 Poly- imide and Polybenzimidazole,” Polymer, Vol. 48, No. 10, 2007, pp. 2901-2909. doi:10.1016/j.polymer.2007.03.040

[23]   Y. Yang, X. Wang, L. Liu, X. Xie, Z. Yang, R. K. Y. Li and Y. Mai, “Structure and Photoresponsive Behaviors of Multiwalled Car-bon Nanotubes Grafted by Polyurethanes Containing Azobenzene Side Chains,” Journal of Physi- cal Chemistry C, Vol. 111, No. 30, 2007, pp. 11231-11239. doi:10.1021/jp0728510

 
 
Top