Back
 JEMAA  Vol.4 No.7 , July 2012
Rectangular Microstrip Antenna Using Inductive Septums for Dual Band Operation with a New Resonant Mode
Abstract: A novel rectangular microstrip antenna on conventional dielectric substrate with centrally loaded inductive septums are proposed for dual band operation. The proposed antenna has been thoroughly investigated and the results are presented in the paper. The conventional patch antenna fabricated on common substrates always resonates at its dominant TM10 mode which produces the radiation field along its broadside direction. In the present investigation, the same microstrip antenna is designed on conventional substrate with centrally located inductive septums beneath the patch, with a view to develop a new resonant mode which will produce radiation like dominant TM10 mode. The speciality of the proposed antenna is to excite a new resonant mode with good impedance bandwidth while the traditional dominant TM10 mode is kept unaltered. A thorough quantitative analysis is presented to justify the reason of generation of new resonant mode along with the traditional dominant TM10 mode. An easy and handful formulation has been established for calculation of the frequency for new resonant mode as a function of antenna parameters and the gap between the septums. The proposed idea has been verified through a commercial software package for a patch operating in C band and an excellent agreement is revealed.
Cite this paper: R. Ranjan, M. Verma, S. Mukherjee, D. Ghosh and S. Chattopadhyay, "Rectangular Microstrip Antenna Using Inductive Septums for Dual Band Operation with a New Resonant Mode," Journal of Electromagnetic Analysis and Applications, Vol. 4 No. 7, 2012, pp. 285-292. doi: 10.4236/jemaa.2012.47040.
References

[1]   R. Garg, P. Bhartia, I. Bahl and A. Ittipiboon, “Microstrip An-tenna Design Handbook,” Artech House, Norwood, 2001.

[2]   S. Maci and G. B. Gentili, “Dual-Frequency Patch Antennas,” IEEE Antennas and Propagation Magazine, Vol. 39, No. 6, 1997, pp. 13-20. doi:10.1109/74.646798

[3]   J.-S. Chen and K.-L. Wong, “A Single-Layer Dual-Frequency Rectangular Microstrip Patch Antenna Using a Single Probe Feed,” Micro-wave and Optical Technology Letters, Vol. 11, No. 2, 1996, pp. 38-84. doi:10.1002/(SICI)1098-2760(19960205)11:2<83::AID-MOP10>3.0.CO;2-8

[4]   Y. M. M. Antar, A. I., Ittipiboon and A. K. Bhattachatyya, “A Dual-Frequency Antenna Using a Single Patch and An Inclined Slot,” Microwave and Optical Technology Letters, Vol. 8, No. 6, 1995, pp. 309-310. doi:10.1002/mop.4650080613

[5]   J. S. Dahele, K. F. Lee and D. P. Wong, “Dual Frequency Stacked Annular-Ring Microstrip Antenna,” IEEE Transactions on Antennas and Propagation, Vol. 35, No. 11, 1987, pp. 1281-1285. doi:10.1109/TAP.1987.1143997

[6]   J. Wang, R. Fralich, C. Wu and J. Litva, “Multifunctional Aperture Coupled Stack Antenna,” Electronics Letters, Vol. 26, No. 25, 1990, pp. 2067-2068. doi:10.1049/el:19901333

[7]   W. F. Richards, S. E. Davidson and S. A. Long, “DualBand Reactively Loaded Microstrip An-tenna,” IEEE Transactions on Antennas and Propagation, Vol. 33, No. 5, 1985, pp. 556-560. doi:10.1109/TAP.1985.1143617

[8]   S. E. Davidson, S. A. Long and W. F. Richards, “DualBand Microstrip Antenna with Monolithic Reactive Loading,” Electronics Letters, Vol. 21, No. 21, 1985, pp. 936-937. doi:10.1049/el:19850662

[9]   H. Na-kano and K. Vichien, “Dual-Frequency Patch Antenna with a Rectangular Notch,” Electronics Letters, Vol. 25, No. 16, 1989, pp. 1067-1068. doi:10.1049/el:19890714

[10]   J.-H. Lu and K.-L. Wong, “Slot-Loaded, Meandered Rectangular Microstrip Antenna with Compact Dual Frequency Operation,” Electronics Letters, Vol. 34, No. 11, 1998, pp. 1048-1050. doi:10.1049/el:19980737

[11]   K.-L. Wong and K.-P. Yang, “Small Dual-Frequency Microstrip Antenna with Cross Slot,” Electronics Letters, Vol. 33, No. 23, 1997, pp. 1916-1917. doi:10.1049/el:19971355

[12]   K.-L. Wong and W.-S. Chen, “Compact microstrip antenna with dual-frequency operation,” Electronics Letters, Vol. 33, No. 8, 1997, pp. 646-647. doi:10.1049/el:19970433

[13]   X. L. Bao and M. J. Ammann, “Dual-Frequency Circularly-Polarized Patch Antenna with Compact Size and Small Frequency Ratio,” IEEE Transactions on Antennas and Propagation, Vol. 55, No. 7, 2007, pp. 2104-2107. doi:10.1109/TAP.2007.900271

[14]   “High Frequency Structure Simulator,” Ansoft Corp, Version 10.

[15]   S. Chattopadhyay, M. Biswas, J. Y. Siddiqui and D. Guha, “Rectangular Microstrips with Variable Air-Gap Varying Aspect Ratio: Im-proved Formulation and Experiments,” Microwave Optical Technology Letters, Vol. 51, No. 1, 2009, pp. 169-173. doi:10.1002/mop.24025

[16]   K. Malakar, J. Nandi, S. Mitra, P. K. Gorai, S. Chattopadhyay, J. K. Sah and A. Anand, “Physical Insight Into The Low Cross Polarized Radiation with Rectan-gular Microstrip Antenna on Cupped Ground Plane,” Interna-tional Journal of Electrical, Electronics and Computer Systems, Vol. 6, No. 2, 2012, pp. 1-5.

[17]   S. K. Ghosh, A. Ghosh, D. Ghosh, S. Chattopadhyay and S. Banerjee, “Rectangular Mi-crostrip Antenna on Ridge Ground Plane to Control the Reso-nant Modes for Improved Bandwidth using Transverse Reson-ance Method,” Journal of Electromagnetic Analysis and Appli-cations, Vol. 4, No. 5, 2012, pp. 206-211. doi:10.4236/jemaa.2012.45028

[18]   P. A. Rizzi, “Microwave Engineering: Passive Circuits,” Prentice Hall, Upper Saddle River, 1999, p. 314

[19]   R. E. Collin, “Foundation for Micro-wave Engineering,” 2nd Edition, IEEE Press, Hoboken, 2003, p. 340.

 
 
Top