Cite this paper
A. Andrews, E. Gikunoo, B. Kyei-Fram and R. Sarfo, "Characterization of Spent Prebaked Aluminium Carbon Anode as a Source of Fuel for Foundrymen," Journal of Minerals and Materials Characterization and Engineering
, Vol. 11 No. 1, 2012, pp. 31-41. doi: 10.4236/jmmce.2012.111003
Adeleke, A.O., Makan, R.S., Ibitoye, S.A., 2006, Characterisation of Ajaokuta coke for blast furnace iron making. J. Min. & Mat. Charact. & Eng. 5(2), 155-165.
Adygezalov, S.A. Dvortsov, S.P. Shemonaeva, T.N. Strakhov, V.M. Surovtseva, I.V., 2011, Industrial production of coke briquets for copula smelting of iron. Coke & Chemistry, 54(1), 19-22.
Akpabio, E.J. Obot, O.W., 2011, Optimization utilization of petroleum coke in Nigerian metallurgical industry. J. Min. & Mat. Charact. & Eng., 10(3), 267-278.
Benk, A. Coban, A., 2011, Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze. Fuel Processing Technology, 92, 1078–1086.
Nasirudeen, M.B. Jauro, A., 2011, Quality of Some Nigerian Coals as Blending Stock in Metallurgical Coke Production. J. Min. & Mat. Charact. & Eng., 10(1), 101-109.
Sultanguzin, I.A. Isaev, M.V. Kurzanov, S.Y., 2011, Optimizing the production of coke, coal chemicals, and steel on the basis of environmental and energy criteria. Metallurgist, 54(9–10), 600-607.
He, Q. Wang, R. Wang, W. Xu, R. Hu, B., 2011, Effect of particle size distribution of petroleum coke on the properties of petroleum coke-oil slurry. Fuel: In press.
Zhan, X. Jia, J. Zhou, Z. Wang, F., 2011, Influence of blending methods on the co-gasification reactivity of petroleum coke and lignite. Energy Conversion and Management, 52, 1810–1814.
Malyutina, E.M. Dyskina, B.S., 2011, Expanding pitch-coke production. Coke & Chmistry, 54(1), 16-18.
Kubota, M. Ito, T., 2011, Watanabe F, Matsuda H, Pore structure and water adsorptivity of petroleum coke-derived activated carbon for adsorption heat pump-Influence of hydrogen content of coke. Applied Thermal Engineering, 31, 1495- 1498.
Shenqi, X. Zhijie, Z. Jie, X. Guangsuo, Y. Fuchen, W., 2011, Effects of alkaline metal on coal gasification at pyrolysis and gasification phases. Fuel, 90, 1723–1730.
Lu, L. Sahajwalla, V. Kong, C. Harris, D., 2001, Quantitative X-ray diffraction analysis and its application to various coals. Carbon, 39, 1821-1833.
Sonibare, O.O. Haeger, T. Foley, S.F., 2010, Structural characterization of Nigerian coals by X-ray diffraction, Raman and FTIR spectroscopy. Energy, 35, 5347-5353.
Askeland, D. Phule, P.P., 2006, The science and engineering of materials, International student edition, Canada, Thomson.
Sakurovs, R. Burke, L., 2011, Influence of gas composition on the reactivity of coke. Fuel Processing Technology, 92, 1220–1224.
Haley, D.G., 2004, The efficiency of coke producing quality iron from lower quality coke, www.asi-alloys.com/pdf/GeoHaleyCokePaper.pdf
Diez, M.A. Alvarez, R. Barriocanal, C., 2002, Coal for metallurgical coke production: Prediction of coke quality and future requirements for coke making. Int. J. Coal Geol, 50, 289-412.
Hilding, T., 2005, Evolution of coke properties while decending through a blast furnace. Licentiate Thesis, Lule? University of Technology, Sweden.
Maybury, J.J., 2007, Investigation of the stress induced properties of coke during carbonization. MSc Thesis, West Virginia University.
Gupta, R.B., 2002, Foundry engineering. 3rd ed. New Delhi, Satya Prakashan.