JMMCE  Vol.10 No.13 , November 2011
Effect of Some Plating Variables on Zinc Coated Low Carbon Steel Substrates
Abstract: This work examined the effect of plating variables on zinc coated low carbon steel substrates. The electrodeposition of steel substrates was carried out in zinc electrolyte bath. Time, voltage, distance from the anode to the cathode and the immersion depth served as plating variables. The results showed that weight gained increases as the plating time increases for the constant depth of immersion while the weight gained per unit time by varying immersion depth is irregular. Also, the study demonstrated that sample plated for 20 minutes; 20cm from the anode, 45cm depth of immersion at 0.8V exhibited the best plating properties with homogeneity of diffuse plating efficiency.
Cite this paper: B. Durodola and J. Olugbuyiro, "Effect of Some Plating Variables on Zinc Coated Low Carbon Steel Substrates," Journal of Minerals and Materials Characterization and Engineering, Vol. 10 No. 13, 2011, pp. 1255-1262. doi: 10.4236/jmmce.2011.1013098.

[1]   Allen, S.H; Holowenko, A.R and Laughlin, H.G; 1982. Theory and Problems of Machine Design, McGraw Hill book company Inc. New York.

[2]   Smith, W.F; 1990 Principle of materials science and Engineering, McGraw Hill international, New York.

[3]   Sedlacek, V; 1993. Metallic Surface, Films and Coatings, McGraw Hill, London.

[4]   Durney, L. J; 1984 Electroplating Engineering Handbook 4th edition part 1, page 581.