Back
 JMMCE  Vol.10 No.11 , September 2011
High Temperature Oxidation and Hot Corrosion Behaviour of 9Cr 1Mo Ferritic Cold Rolled Steel in Air at 900°C under Cyclic Condition
Abstract: The oxidation behaviour of 10%, 30%, and 50% cold rolled and unprocessed 9Cr 1Mo ferritic steels in air have been studied under isothermal conditions at a temperature of 900°C in a cyclic manner. Oxidation kinetics was established for all samples on which experiment was conducted in air at 900°C under cyclic conditions for 50 cycles by thermogravimetric technique. Each cycle consisted of 1 hour heating at 900°C followed by 20 min of cooling in air. 10% cold rolled sample followed parabolic rate of oxidation while 30% cold rolled sample showed accelerated rate of weight gain. X-ray diffraction (XRD) and scanning electron microscopy/energy dispersive X-ray (SEM/EDAX) techniques were used to characterise the oxidized sample and their scales. 10% cold rolled steel was found to be more corrosion resistance than other in air oxidation for 50 cycles.
Cite this paper: A. Shukla, D. Gond, M. Bharadwaj and D. Puri, "High Temperature Oxidation and Hot Corrosion Behaviour of 9Cr 1Mo Ferritic Cold Rolled Steel in Air at 900°C under Cyclic Condition," Journal of Minerals and Materials Characterization and Engineering, Vol. 10 No. 11, 2011, pp. 1061-1075. doi: 10.4236/jmmce.2011.1011081.
References

[1]   Aurelie Wauthier, Helene Regle, Jorge Formigoni, Gwenola Herman, “The effects of asymmetrical cold rolling on kinetics, grain size and texture in IF steels”, Materials Characterization 60 (2009), 90-95.

[2]   J.C. Van Wortel, C.F. Etienne, F. Arav, Application of modified 9chromium steels in power generation components, in: VDEh ECSC Information Day, The Manufacture and Properties of Steel91 for the Power Plant and Process Industries, Dusseldorf, 5th November, 1992, paper 4.2.

[3]   T. Fujita, “Current progress in advanced high Cr steel for high temperature applications” ISIJ Int. 32 (2) (1992), 175.

[4]   G.E. Birchenall, “A brief history of the study of oxidation of metals and alloys, in: High Temperature Corrosion”, Proceedings, NACE, San Diego, CA, 1981, 3.

[5]   D.A. Jones, “Principles and Prevention of Corrosion”, second ed., Prentice Hall, USA, 1996.

[6]   P. Kofstad, “High-temperature Corrosion”, Elsevier Applied Science, London, 1988, pp. 382–385 (Chapter 11).

[7]   I. Saeki, T. Saito, R. Furuichi, M. Itoh, “Growth process of protective oxides formed on type 304 and 430 stainless steels at 1273°K”, Corros. Sci. 40 (8) (1998), 1295.

[8]   S. Jianian, Z. Longjiang, L. Tiefan, “High temperature oxidation of Fe–Cr alloys in wet oxygen”, Oxid. Met. 48 (3, 4) (1997), 347.

[9]   Z. Tokei, H. Viefhaus, H.J. Grabke, “Initial stages of oxidation of a 9CrMoV steel: role of segregation and martensite laths”, Appl. Surf. Sci. 165 (1) (2000), 23.

[10]   A.P. Greeff, C.W. Louw, H.C. Swart, “The oxidation of industrial FeCrMo steel”, Corros. Sci. 42 (10) (2000), 1725.

[11]   A. Arztegui, T. Gomez-Acebo, F. Castro, “Steam oxidation of ferritic steels: kinetics and microstructure”, Bol. Soc. Esp. Ceram. Vidr. 39 (3) (2000), 305.

[12]   A.S. Khanna, P. Rodriguez, J.B. Gananamoorthy, “Oxidation kinetics, breakaway oxidation, and inversion phenomenon in 9Cr–1Mo steels”, Oxid. Met. 26 (3, 4) (1986), 171.

[13]   Dionisio Laverde, Tomas Gomez-Acebo, Francisco Castro, “Continuous and cyclic oxidation of T-91 ferritic steel under steam”, Corrosion Science 46, 2 July 2003, 613–631.

[14]   D. Caplan, M. Cohen, “Effect of cold work on the oxidation of iron from 400-650°C”, Pergamon Press Ltd. Great Britain, Corrosion Science. 1966, Vol. 6, 321 - 335.

[15]   N.S. Bornstein, M.A. Decrescente, H.A. Roth, MMIC-75-27, Columbus, Ohio, USA, (1975) 115.

[16]   C. Batista, A. Portinha, R.M. Ribeiro, V. Teixeira, C.R. Oliveira, Surf. Coat. Technol. 200 (2006) 6783–6791.

[17]   P. Niranatlumpong, C.B. Ponton, H.E. Evans, Oxid. Met. 53 (3–4) (2000) 241.

[18]   R.A. Rapp, J.H. Devan, D.L. Douglass, P.C. Nordine, F.S. Pettit, D.P.Whittle, Mater. Sci.Eng.50 (1981) 1.

[19]   P.S. Liu, K.M. Liang, H.Y. Zhou, S.R. Gu, X.F. Sun, H.R. Guan, T. Jin, K.N. Yang, Surf. Coat. Technol. 145 (2001) 75.

[20]   Kimura K, Kushima H, Abe F, Yagi K, Irie H. In: Strang A, Banks WM, Conroy RD, Goulette MJ, “Advances in turbine materials, design and manufacturing”. London: The Institute of Materials, (1997) 257–69.

[21]   J. Orr, A. Di Gianfrancesco, “The effect of compositional variations on the properties of steel 91, in: VDEh ECSC Information Day, The Manufacture and Properties of Steel 91 for the Power Plant and Process Industries”, Dusseldorf, (1992) 2.4.

 
 
Top