JMMCE  Vol.10 No.9 , July 2011
Characterization and Corrosion Behavior of Plasma Sprayed Pure and Reinforced HA Coatings in Simulated Body Fluid
ABSTRACT
To evaluate the corrosion behavior in simulated body fluid pure and 10wt% 80Al2O3-20TiO2 reinforced HA coatings were successfully deposited by atmospheric plasma spray technique on SS-304L substrate alloy. To eliminate non favorable phases on the as sprayed coatings the coatings were heat treated at 700°C and 800°C for post coating heat treatment technique. Both pure and reinforced as sprayed and post coating heat treated coatings were characterized by XRD and SEM/EDAX analysis for surface characterization and further evaluated by electrochemical test for corrosion behavior in simulated body fluids.

Cite this paper
G. Singh, S. Singh and S. Prakash, "Characterization and Corrosion Behavior of Plasma Sprayed Pure and Reinforced HA Coatings in Simulated Body Fluid," Journal of Minerals and Materials Characterization and Engineering, Vol. 10 No. 9, 2011, pp. 765-775. doi: 10.4236/jmmce.2011.109060.
References
[1]   C.N. Elias, J.H.C. Lima, R. Valiev, and M.A. Meyers, 2008 “Biomedical Applications of Titanium and its Alloys”, Journal of the Minerals, Metals and Materials Society, Vol. 60, No. 3, pp. 46-49.

[2]   David F. Williams, 1981, Biocompatibility of Clinical Implant Materials, 1st ed., CRC Press.

[3]   M. Younesi, M.E. Bahrololoom, M. Ahmadzadeh, 2010, “Prediction of wear behaviors of nickel free stainless steel–hydroxyapatite bio-composites using artificial neural network”, Computational Materials Science, Vol. 47, pp. 645–654.

[4]   Y.C. Tsui, C. Doyle, T.W. Clyne, 1998, “Plasma sprayed hydroxyapatite coatings on titanium substrates Part 1: Mechanical properties and residual stress levels”, Biomaterials Vol. 19, pp. 2015-2029.

[5]   C. Garc?a, S. Cere, A. Dura, 2004, “Bioactive coatings prepared by sol–gel on stainless steel 316L”, J. Non-Cryst. Solids, Vol. 348, pp. 218–224.

[6]   Xin Pang, Igor Zhitomirsky, 2007, “Electrophoretic deposition of composite hydroxyapatite-chitosan coatings”, Mater. Charac. Vol. 58, pp. 339–348.

[7]   W.U. Zhen-Jun, H.E.Li-ping, Chen Zong-Zhang, 2006, “Fabrication and characterization of hydroxyapatite/Al2O3 bio-composite coating on titanium, Trans. Nonferrous Met. SOC. China, Vol. 16, pp. 259-266.

[8]   M.H. Fathi, F. Azam, 2007, “Novel hydroxyapatite/tantalum surface coating for metallic dental implant”, Mater. Lett. Vol. 61, pp. 1238–1241.

[9]   Kantesh Balani, Yao Chen, Sandip P. Harimkar, Narendra B. Dahotre, Arvind Agarwal, 2007, “Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution”, Acta Biomaterialia , Vol. 3, pp. 944–951.

[10]   M.F. Morks and Akira Kobayashi, 2007 “Effect of gun current on the microstructure and crystallinity of plasma sprayed Hydroxyapatite coating”, Applied Surface Science, Vol. 253, pp. 7136-7142.

[11]   M.F. Morks, N.F. Fahim and A. Kobayashi,2008, “Structure, mechanical performance and electrochemical characterization of plasma sprayed SiO2/Ti-reinforced hydroxyapatite biomedical coatings”, Applied Surface Science, Vol. 255, Part 2, pp. 3426-3433.

[12]   Wenxiu Que, K.A. Khor, J.L. Xu, L.G. Yu, 2008, “Hydroxyapatite/titania nanocomposites derived by combining high-energy ball milling with spark plasma sintering processes”, Journal of the European Ceramic Society, Vol. 28, pp. 3083–3090.

[13]   Huaxia Ji, P.M.Marquis, 1993, “Effect of heat treatment on the microstructure of plasmasprayed hydroxyapatite coating” Biomaterials, Vol. 14,No. 1,pp.64-68.

[14]   Yu Peng Lu , Yi Zhong Song, Rui Fu Zhu, Mu Sen Li, Ting Quan Lei, 2003, “ Factors influencing phase compositions and structure of plasma sprayed hydroxyapatite coatings during heat treatment” Applied Surface Science,Vol.206, pp. 345-354.

[15]   Shinn-jyh Ding, Tsui-hsien Huang, Chia-tze Kao, 2002, “Immersion behavior of plasma sprayed modified hydroxyapatite coatings after heat treatment”, Surface and Coatings Technology, Vol. 165, pp. 248-257.

[16]   Zhao Guo-liang, Wen Guang-wu, Wu Kun, 2009, “Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings”, Trans. Nonferrous Met. Soc. China, vol.19, pp. 463- 469.

[17]   Bang Yen Chou, Edward Chang, 1999, “Microstructural characterization of plasma sprayed hydroxyapatite 10 wt % ZrO2 composite coating on titanium”, Biomaterials, Vol. 20, pp. 1823-1832.

[18]   Y.C. Tsui, C. Doyle and T.W. Clyne, 1998, “Plasma sprayed hydroxyapatite coatings on titanium substrates Part 2: optimization of coating properties”, Biomaterials 1998, 19, p2031-2043.

[19]   Singh Gurbhinder, Singh Surendra, Prakash Satya, (2011), “Surface characterization of plasma sprayed pure and reinforced hydroxyapatite coating on Ti 6Al 4V alloy”, Surface and Coatings Technology, Vol. 205, pp. 4814-4820.

[20]   Singh Gurbhinder, Singh Surendra, Prakash Satya, (2011), “Post Heat Treatment of Plasma Sprayed Pure and Alumina-Titania Reinforced Hydroxyapatite Coating on SS 304 Steel”, Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No.2, pp.173-184.

[21]   Singh Gurbhinder, Singh Surendra, Prakash Satya, (2010), “Role of Post Heat Treatment of Plasma Sprayed Pure and Al2O3-TiO2 Reinforced Hydroxyapatite Coating on the Microstructure and Mechanical Properties”, published in Journal of Minerals & Materials Characterization & Engineering, Vol. 9, No.12, pp.1059-1069.

[22]   Tadashi Kokubo, 1990 “Surface chemistry of bioactive glass-ceramics” Journal of Non- Crystalline Solids, Vol. 120, pp.138-151.

[23]   B. Viswanath, N. Ravishankar, 2006, “Interfacial reactions in hydroxyapatite/alumina nano-composites”, Scripta Materialia, Vol. 55, pp. 863–866.

[24]   Lee Yi-Pang, Wang Chih-Kuang, Huang Tsui-Hsien, Chen Chun-Cheng, Kao Chia-Tze, Ding Shinn-Jyh, 2005, “In vitro characterization of post heat-treated plasma-sprayed hydroxyapatite coatings”, Surface & Coatings Technology, Vol. 197, pp. 367– 374.

[25]   Chen C.C., Huang T.H., Kao C.T., Ding S.J., 2004, “Electrochemical study of the in vitro degradation of plasma-sprayed hydroxyapatite/bioactive glass composite coatings after heat treatment”, Electrochimica Acta, Vol. 50, pp. 1023–1029.

 
 
Top