JMMCE  Vol.10 No.6 , May 2011
Effect of Deformation on the Mechanical and Electrical Properties of Aluminum-Magnesium Alloy
ABSTRACT
This paper presents the effect of deformation on the tensile strength, toughness, hardness and electrical resistance of aluminum 6063 alloy. Cast samples were cold rolled in the range of 0-24 percent thickness reduction and subjected to mechanical (static, dynamic) and electrical resistance tests. Results show significant improvement in hardness and electrical resistance properties of the alloy. The nature, amount and distribution of the secondary phase, Mg2Si,particles precipitated within the matrix which was influenced by the extent of cold-work, are responsible for the observed behaviour. The resistance of the alloy also depends on the degree of cold work carried out prior to use.

Cite this paper
S. Adeosun, O. Sekunowo, S. Balogun and L. Osoba, "Effect of Deformation on the Mechanical and Electrical Properties of Aluminum-Magnesium Alloy," Journal of Minerals and Materials Characterization and Engineering, Vol. 10 No. 6, 2011, pp. 553-560. doi: 10.4236/jmmce.2011.106042.
References
[1]   Van Lanker. (1967), “Metallurgy of aluminum Alloys.” William Clones and Sons Ltd. pp.236-248.

[2]   Balogun, S., Esezobor, D. and Adeosun, S. (2007), “Effects of Deformation Processing on the Mechanical Properties of Aluminum Alloy 6063.” Metallurgical and Materials Transactions A, Volume 38, Number 7, pp. 1570-1574(5).

[3]   Abdulhaqq .A. Hamid, P., Ghosh, S., Jain, O. and Subrata, R. (2005), “Processing, Microstructure and Mechanical Properties of Cast in-situ Al(Mg,Mn)-Al2O3 (MnO2) Composites.” Metallurgical and Materials Transactions A, Vol. 36A, pp 221.

[4]   Roy, N., Samuel, A. and Samuel, F. (1996), Metallurgical and Materials Transactions, Vol. 27A, pp. 415-429.

[5]   Lassance, D., Schmitz, M., Delannay F. and Pardoen, T. (2002), “Linking Microstructure and High Temperature Ductility in Aluminum alloys AA6xxx.” Seminar paper available online at: www.hallf.kth.se/forskning/ecf15/ECF-proceedings/Lassance.

[6]   Valiev, R., Krashkov, N. and Tsenev, K. (1991), “Plastic Deformation of Alloys with Submicron-grained Structure.” Materials Science and Engineering A, Vol.153, Issue 3, pp.172-196.

[7]   Doege, E. and Droder, K. (2001), “Sheet Metal Forming of Magnesium Wrought Alloys-Formability and Process Technology.” Materials Science and Engineering A, Vol. 27B, Issue 3, pp. 89-102.

[8]   Li, D. and Ghosh, A. (2003), “Tensile Deformation Behaviour of Aluminium Alloys at Warm Forming Temperatures.” Materials Science and Engineering A, Vol. 352, Issue 1-2, pp. 279-286.

[9]   Miller, W., Zhuang, L., Botterma, J. and Wtterbrood, A. (2000), “Recent Development in Aluminium Alloys for the Automobile Industry.” Journal of Materials Science, Vol. 273, Issue 1-2, pp. 204-215.

 
 
Top