JMMCE  Vol.9 No.8 , August 2010
Synthesis of Hydroxyapatite Bio-Ceramic Powder by Hydrothermal Method
Abstract: Hydroxyapatite bio-ceramic powder was synthesized using waste eggshells as calcium source by a straight forward thermal method. The process is carried out at high temperature. Different calcium phosphate phases were obtained just by changing the thermal treatment. HAp is the only apatite present in the reaction products, along with minute fractions of other calcium compounds. The final product was characterized by X-ray diffraction, Scanning electron microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FT-IR). Thermal analysis (TG–DTA) was carried out to investigate the thermal stability of HAp.
Cite this paper: P. Hui, S. Meena, G. Singh, R. Agarawal and S. Prakash, "Synthesis of Hydroxyapatite Bio-Ceramic Powder by Hydrothermal Method," Journal of Minerals and Materials Characterization and Engineering, Vol. 9 No. 8, 2010, pp. 683-692. doi: 10.4236/jmmce.2010.98049.

[1]   Dean Mo Liu, 1997, “Fabrication of hydroxyapatite with controlled porosity”, Journal of Material Science: Materials in Medicine, Vol. 8, pp. 227-232.

[2]   V. Jokanovi , B. Jokanovi , 2008, “Kinetics and sintering mechanisms of hydro-thermally obtained hydroxyapatite,Materials Chemistry and Physics,Vol.111, pp. 180–185.

[3]   Hench, L.L., 1991, “Bioceramics: From Concept to Clinic”, Journal of American Ceramics Society, Vol.74, pp. 1487-1510.

[4]   Willmann, G., 1993, “Material properties of hydroxylapatite ceramics”, Interceram, 42, pp. 206-208

[5]   Willmann, G., 1996, “Medical grade hydroxyapatite: State of the art”, British Ceram. Trans., Vol. 95, pp. 212-216.

[6]   Cleries L, Frenadez-Pradas JM,Morenza JL.,1999, “Bone growth on and resorption of calcium phosphate coatings by pulsed laser deposition”, J. Bio-med Mat. Research Vol. 49, pp. 43-45.

[7]   Sun L, Binnat CC, Gross KA, Kucuk A. Mat.,2001, “Fundamentals and clinical performance of plasma sprayed hydroxyapatite coatings:A review”, J. Bio-med Mat. Research, Vol. 58, pp. 570-592.

[8]   Eric M. Rivera, Miguel Araiza, Witold Brostow, 1999, “Synthesis of hydroxyapatite from eggshells”, Materials Letters, Vol. 41, pp. 128–134

[9]   K Prabakaran, A Balamurugan, S Rajeswari, 2005, “Development of calcium phosphate based apatite from hen’s eggshell”, Bull. Mater. Sci., Vol. 28, No. 2, pp. 115–119.

[10]   Koumoulidis G C, Vaimakia T C, Sdoukos A T, Boukos N K and Trapalis C,2001,Preparation of hydroxyapatite lathlike particles using high-speed dispersing equipment” J. Am. Ceram. Society, Vol. 84, pp. 1203-1208.

[11]   Milev A, Kannangara G S K and Ben-Nissan B, 2003, ”Morphology stability of hydroxyapayite preccursor”, Material Letter, Vol. 57, pp.1960-1965.

[12]   R. Roy, 1974, “Hydroxyapatite formed from coral skeletal carbonate by hydrothermal exchange”, Nature, Vol. 24, pp.220-222.

[13]   H. Monma, T. Kamiya, 1987,”Preparation of hydroxyapatite by the hydrolysis of brushite”, J. Mater. Science, Vol. 22, pp. 42-47.

[14]   V. Jokanovic, D. Izvonar, M.D. Dramicanin, B. Jokanovic, V. Zivojinovic, D. Markovic, B. Dacic, 2006, “Thin films of SiO2 and hydroxyapatite on titanium deposited by spray pyrolysis, J. Mater. Sci: Mater. Medical, Vol. 17,pp. 539–546.

[15]   V. Jokanovic, D. Uskokovic, 2005, “Calcium hydroxyapatite thin films on titanium substrates prepared by ultrasonic spray pyrolysis”, Mater Transaction, Vol. 46, pp. 228–235.

[16]   S. Koutsopoulos, 2002, “Synthesis and characterization of hydroxyapatite crystals: A review study on the analytical methods”, Journal of Biomedical Material Research, Vol. 62, pp. 600-612.

[17]   Dean-Mo Liu, T. Troczynski, Wenjea J. Tseng, 2001, “Water-based sol–gel synthesis of hydroxyapatite: process development”, Biomaterials, Vol. 22, pp.1721-1730.