ABSTRACT The microstructure of a series of binary Ni-B alloys containing various amounts of vanadium additions were investigated by Differential Thermal Analysis (DTA), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Energy Dispersive X-ray Analysis (EDXA). Due to the vanadium addition in the alloys quenched from the liquidus, the formation of the Ni3B phase was enhanced even when the nominal composition was hypoeutectic. The addition of vanadium led to the formation of t (Ni20.4V2.6B6) phase during the present investigation. In addition, the crystallographic orientation relationship of this ternary phase with the nickel matrix was reported. The solid-state eutectoid transformation of the Ni3B phase during cooling was also reported and discussed.
Cite this paper
J. Ajao, "Preparation and Structural Characterization of Vanadium Doped Ni – B Binary Hard Alloys," Journal of Minerals and Materials Characterization and Engineering, Vol. 9 No. 6, 2010, pp. 559-568. doi: 10.4236/jmmce.2010.96040.
 Fernandez, E., Cadenas, M., Gonzalez, R., Navas, C., Fernandez, R. and J. de Damborenea, 2005, “Wear behaviour of laser clad NiCrBSi coating”, Wear 259: 870-875.
Gonzalez, R., Garc?a, M. A., Penuelas, I., Cadenas, Roc?o, Fernandez, Ma. Del., Hernandez Battez, A., and Felgueroso, D., 2007, “Microstructural study of NiCrBSi coatings obtained by different processes”, Wear 263: 619–624.
Knotek, O., Lohage, P. and Reimann, H., 1983, “Nickel-based Wear-resistant Coatings by Vacuum Melting”, Thin Solid Films 108:449-458.
Knotek, O., Reimann, H. and Lohage, P., 1981, “Reactions between Ni-Cr-B-Si matrixes and carbide additives in coating during fusion treatment”, Thin Solid Films 83:361 – 367.
Lebaili, S., Durand-Charre, M. and Hamar-Thibault, S., 1988, “The Metallurgical Structure of as –solidified Ni-Cr-B-Si-C Hardfacing Alloys”, J. Mat. Sci. 23:3603–3611.
Chin-you Hsu, Jien-Wei Yeh, Swe-Kai Chen and Tao-Tsung Shun., 2004, “Wear Resistance and High-Temperature Compression Strength of FCC CuCoNiCrAl0.5Fe Alloy with Boron Addition”, Metallurgical and Materials Transactions A Vol 35A: 1465 - 1470.
Lebaili, S, Ajao, J. and Hamar-Thibault, S., 1992, “Preparation and Characterization of meltspun nickel-based alloys containing heavy metals”, J. Alloys Compd. 188: 87-93.
Li, Q., Zhang, D., Lei, T., Chen, C. and Chen, W., 2001, “Comparison of laser-clad and furnacemelted Ni-based alloy microstructures”, Surf. Coat. Technol. 137:122–135.
Ajao, J. and Hamar-Thibault, S., 1988, “Influence of Additions on the Solidification behavior of Ni-B alloys – crystallography of Ni-Bi3B eutectic”, J. Mater. Sci. 23: 1112 – 1125.
Stadelmaier, H. H. and Balance, G. B., 1967, “The Ni-V-B Ternary System”, Metall. 21, 691-695.
Knotek, O. and Lugscheider, E., 1974, “On the Structure of Ni-Cr-B-Si Hardfacing Alloys and their Bonding Reactions”, J. Vacuum Sci. Tech. 11:798 – 801.
Finch, C. B., Becher, P. F., Ferber, M. K. Tennery, V.J. and Yust, C. S., 1982, “Growth and Properties of Ni20.3Ti2.7B6 (?- phase) Crystals”, J. Cryst. Growth 58: 647 – 649.
Ajao, J. A., 2009, “Phase transitions in some nickel-rich nickel–boron–titanium hard alloys”, J. Alloys Compds. DOI:10.1016/j.jallcom.2009.12.091.
Ajao, J. and Hamar-Thibault, S., 1989, “Structure Observations by High Resolution Electron Microscopy of Ni-B Meltspun Alloys”, J. Mater. Sci. 24:3647–3659.
Casanova, P., Joud, J.C. Senillou, C. and Yavari, A. R., 1984, “Elaboration des Rubans larges de Verres Metalliques”, Mem. Sci. Rev. Met. 81:553–559.