JMMCE  Vol.9 No.3 , March 2010
Microstructural Study of Heat Treated Chromium Alloyed Grey Cast Iron
ABSTRACT
This work investigated the effect of annealing, normalizing and quenching heat treatments on the microstructure of some chromium alloyed grey cast iron. Three sets of ten samples each having chromium contents of 0.5, 1.5 and 2.5% were heat treated above the upper critical temperature, to austenitizing temperatures (800℃, 850℃, 900℃) for one hour each and then annealed, normalized and water quenched. Metallographic analyses of the heat treated samples were done. The results showed carbides content increased with increasing Chromium addition.

Cite this paper
P. Atanda, A. Okeowo and O. Oluwole, "Microstructural Study of Heat Treated Chromium Alloyed Grey Cast Iron," Journal of Minerals and Materials Characterization and Engineering, Vol. 9 No. 3, 2010, pp. 263-274. doi: 10.4236/jmmce.2010.93021.
References
[1]   Walton, C.F. (1958}, Iron casting Handbook, 3rd edition, published by Iron castings society,Incorporated.

[2]   Robert, Reed-Hill. (1994), Principles of physical metallurgy, 3rd edition, PWS publishing,Boston.

[3]   Sawyer, J.C and Wallace, J.F., (1968), Effects and neutralization of trace elements in ductile gray iron, Transactions, American foundrymens society, Vol.76, page 385.

[4]   Velde C (1999), The Solidification of Gray Cast Iron. http://81://members.lycos.nl/cvdv/ eutcelpart3.html

[5]   Baicchi P., Nicoletto G., Konecná R. (2005), Mechanical behavior of EN-GJL30 Cast iron from three foundries, Procs. SEMDOK, Sulov.

[6]   Callister, W.D. (1996), An Introduction to Materials Science and Engineering, 4th edition, John Wiley and sons Incorporated.

[7]   WWW.key-to - steel.com, Heat treating of gray irons, (part 1); Influence of alloying element on steel microstructure.

[8]   Rajan, T.V., Sharma, C.P.and Sharma, A. (1988), Heat treatment principles and techniques. Prentice Hall of India private Limited, New Delhi.

 
 
Top