JMMCE  Vol.9 No.2 , February 2010
Potential of Tin Tailings an Industrial Waste for Refractory Materials
ABSTRACT
The potential of using Tin tailings industrial waste, from the mineral processing industry for the production of refractory bricks for furnaces lining was studied. The waste was obtained at Tin Ore beneficiation plant, screen and sieve. The sieve Tin tailing was then used in the production of refractory bricks. The properties namely: chemical analysis firing shrinkage, porosity, cold crushing strength, refractoriness and thermal shock resistance were determined. The result obtained show that cold crushing strength and thermal shock increased as the sieve size decreases, which means that high strength bricks can be made from this waste. Also the brick made with 0.9mm sieve size has the highest value of firing shrinkage, lowest value of porosity and with acceptable value of thermal shock resistance. This industrial waste has refractory properties that can be compared with Indian fire clay refractory. Hence, this waste can be employed in refractory bricks production for furnace lining.

Cite this paper
V. Aigbodion, A. AbdulRasheed, S. Olajide, J. Agunsoye and I. Sulaiman, "Potential of Tin Tailings an Industrial Waste for Refractory Materials," Journal of Minerals and Materials Characterization and Engineering, Vol. 9 No. 2, 2010, pp. 123-131. doi: 10.4236/jmmce.2010.92011.
References
[1]   www.uni.edu “Production of Tin in Jos” 2005, 1-34.

[2]   www.amanaonline.com. “Jos Tin smelting company” , 2006, 23-32.

[3]   AbdulRasheed. A, Characteristics studies of Jos Tin Tailings, Unpublished B. Eng thesis Department of Metallurgical engineering, Ahmadu Bello University Zaria, 2009, 12-45

[4]   Chesti, A.R, .Refractories manufacture, properties and Application. Prentice Hall of private limited, London, 1986, 1-140.

[5]   Aigbodion V.S and Asuke,F; Effect of kankara clay on some Refractory properties of Igbokoda silica sand “Inter-Research journal on Engr. Sci and Tech. vol.4 No.2, 2007, 34-40

[6]   Hassan, S.B; Refractory properties of Bauchi and onibode clay of Nigeria for furnace lining, “African journal of sciences and technology.vol.1 No.1, 2000, 45-52.

[7]   Aigbodion,V.S, AbdulRahaman, A.S, Madugu, I.A, ; “characterization study of the effect of zircon sand on some refractory properties of Alkaleri clay”., inter- Research journal in Engr. Sci and Tech. Vol.4, No. 2, 2007, 23-30.

[8]   Reinhard Schuman jr, Metallurgy Engineering vol.1, Addison Wesley pub. Co. Inc, 1982, 89-96.

 
 
Top