JMMCE  Vol.8 No.7 , July 2009
Influence of SiO2 Fillers on Sliding Wear Resistance and Mechanical Properties of Compression Moulded Glass Epoxy Composites
ABSTRACT
The E-glass woven fabric-epoxy (LY 556) (GE) composites have been fabricated with varying amounts of silicon oxide (SiO2) particulate filler viz., 3, 6 and 9 wt % by compression molding followed by hot curing. The fabricated composites were characterized by mechanical properties such as tensile behaviour, flexural behaviour and interlaminar shear strength (ILSS). The effect of silica content on the sliding wear properties such as wear loss, specific wear rate and coefficient of friction of GE composites have been investigated at velocity of 5m/s and constant abrading distance of 1200 m with different loads viz., 30N, 60N and 90N by using pin-on-disc machine. Wear out surface of all the composites were studied using scanning electron microscopy (SEM).

Cite this paper
B. Shivamurthy, &. Siddaramaiah and M. Prabhuswamyc, "Influence of SiO2 Fillers on Sliding Wear Resistance and Mechanical Properties of Compression Moulded Glass Epoxy Composites," Journal of Minerals and Materials Characterization and Engineering, Vol. 8 No. 7, 2009, pp. 513-530. doi: 10.4236/jmmce.2009.87045.
References
[1]   ASM Handbook, 1992, Vol.8, ASM International, Materials Park, Qhio, USA.

[2]   S.K.Sinha and S.K.Biswas, Effect of sliding speed on friction and wear of uni-directional aramid fibre-phenolic resin composite, J. Matls. Sci., 30 (1995) 2430.

[3]   A.VardaRajuu,S.V.SanjeevKumar,G.BabuRao,.G.M.Shashidhara,H.Jiasongand Z.Jun,J.of Reinforced plastics and Comp.,21(200)1591

[4]   J.Bijwe,U.S.Tewari and P.Vasudevan,Wear studies of short glass fiber reinforced polyetherimide composites, Wear, 132 (1989) 247.

[5]   B.S.Tripaty and M.J.Furey, Tribological behavior of unidirectional graphite-epoxy and carbon-PEEK composites, Wear, 162–164 (1993) 385.

[6]   H.Pihtili and N.Tosun, Effect of load and speed on the wear behavior of woven glass fabrics and aramid fibre-reinforced composites, Wear, 252 (2002) 979-984.

[7]   W.J. Bartz, X.Jinfen and B.Viswanth, Wear behavior and failure mechanism of bonded solid lubricants, Wear, 150 (1991) 231-246.

[8]   K.Friedrich, Friction and wear of polymer composites, Elsevier: Amsterdam, 1986.

[9]   M.Cirino, K.Friedrich and R.B. Pipes, The effect of fiber orientation on the abrasive wear behavior of polymer composite materials, Wear, 121 (1988) 127-141.

[10]   N.H.Sung, N.P. Suh, Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites, Wear, 53 (1979) 129-141.

[11]   K.Tanaka, Y.Uchyama, Int. Proceed.of the JSLE-ASLE Intl. Lubrication Conf.; T.Sakurai, Ed.; Elsevier Science Publisher: Tokyo, Japan, 1975.

[12]   J.L.Abot, A.Yasmin, A.J.Jacobsen and I.M.Daniel, In-plane mechanical, thermal and viscoelastic properties of a satin fabric carbon/epoxy composite, Comp. Sci. & Tech., 64 (2004) 263-268.

[13]   R.Park and J.Jang, Comp. Sci. and Tech., 58 (10), (1998) 1621-1628.

[14]   J. Bijwe, Rekha Rattan, Influence of weave of carbon fabric in polyetherimide composites in various wear situations. Wear, 263(2007)984–991.

[15]   W.I. J. Zaini, M.Y.A. Fuad, Ismail, M.S. Mansor, and J. Mustafah. The effect of filler content and size on the mechanical properties of polypropylene/Oil palm wood flour composites. Polym. Intl., 40 (1996) 51-55.

[16]   K.Friedrich, Micro structural efficiency and fracture toughness of short fiber/thermoplastic matrix composites, Composites Sci. and Tech.., 22 (1985) 43-74.

[17]   V.K.Srivastava, and J.P.Pathak, Friction and wear properties of bushising bearing of graphite filled short glass fiber composites in dry sliding, Wear, 197 (1-2) (1996) 145- 150.

[18]   V.K. Srivastava, J.P.Pathak and K.Tahzibi, Wear and friction characteristics of mica filled fibre reinforced epoxy composites, Wear, 152 (2), (1992) 343-350.

[19]   Kishore, P.Sampathkumaran, S.Seetharamu, Vyantheya, S.Murali and R.K. Kumar, SEM observations of the effect of velocity and load on the slide wear characteristics glassfabric- poxy composites with different fillers, Wear, 237 (1), (2000) 20-27.

[20]   S.Bahadur, D.Gong and J.W.Anderegg, The Role of copper composite as fillers in the transfer film formation and wear of nylon, Wear, 154 (2) (1992) 207-223.

[21]   N.G.Hung, N.Chand, Structure and wear characteristics of graphite /UHMWPE composite, J. Res. Ind., 40 (1995) 297-302.

[22]   L.Rey, N.Poisson, A.Maazouz and H.Sautereau, Enhancement of crack propagation resistance in epoxy resin by introducing poly dimethyl siloxane particle, J. Mat. Sci., 34 (1999) 1775-1781.

[23]   Dipa Ray and R. Gnanamoorthy, Friction and wear behavior of vinylester resin matrix composites filled with fly ash particles, J. Reinforced Plastics and Comp., 26 (2007) 5.

[24]   B.Suresha, G.Chandramohan, P.Sampathkumaran and S.Sethuramu, Investigation of the friction and wear behavior of glass-epoxy composite with and without graphite filler, J. Reinforced Plastics and Comp., 26 (2007) 81.

[25]   N.Dayanda jawali, B.Siddeswarappa and Siddaramaiah, Physico-mechanical properties, machinability and morphological behavior of short glass fibre-reinforced nylon 6 composites, J. Reinforced Plastics and Comp., 25(2006) 1409.

[26]   B.Suresh, S.Kshama, A.V.Vidhya and Siddaramaiah, Investigation of tribological behavior of carbon- epoxy composite system, Natl. Conf. on Recent Trends in Mechanical Engineering, held at SJCE Mysore, (2006).

[27]   A.Mandal, M.Chakraborty and B.S.Murthy, Effect of TiB2 particles on sliding wear behavior of Al-4Cu alloy, Wear, 262(2007)60-166.

[28]   Gewen Yi and Fengyuan Yan .Mechanical and tribological properties of phenolic resinbased friction composite filled with several inorganic fillers.Wear, 262(2007)121-129.

[29]   Jayashree bijwe , J. Indumathi and A. K. Ghosh, Evaluation of engineering polymeric composites for abrasive wear performance, J. of Reinforced Plastics and Comp., 18(1999)1573.

[30]   Navinchand, U. K. Dwivedi and M. K. Sharma, Development and tribological behavior of UHMWPE filled epoxy gradient composites, Wear, 262(2007)184-190.

[31]   BulentOzturk, Fazh Arslan and Sultan Ozturk, Hot wear properties of ceramic and basalt fiber reinforced hybrid friction materials, Tribo. Intl. 40(2007)37-48.

[32]   B.Z.Jang, J.Y.Liau, R.Hwang and W.K.Shih, Structure –properties relationships in thermoplastic particulate and ceramic whisker- modified epoxy resins, J. of Reinforced Plastics and Comp., 8(1989)322-331.

[33]   Y.Zhang, C.A.Pickles and J.Cameron, The production and mechanical properties of silicon carbide and alumina whisker- reinforced epoxy composites, J. of Reinforced Plastics and Comp., l.11(1992)1176.

[34]   Kishore, P.Sampathkumaran, S.Seetharamu, P.Thomas, and M. Janardhana, A study on the effect of the type and content of filler in epoxy-glass composite system on the friction and wear characteristics, Wear, 259 (1-6), (2005) 634-641.

[35]   J. Wang, M. Gu, Songhao and S.GE,The role of the influence of MoS2 on the tribological properties of carbon fibre reinforced Nylon1010 composites, Wear, 255 (1-6),( 2003) 774-779.

[36]   J.M.Whitney,I.M.Daniel and R.B.Pipes, Experimental mechanics of fiber reinforced composite materials, Society for experimental mechanics, Brook field centerconnectieut,1984.

[37]   R.E.Bullock, Strength ratios of composite materials in flexural and tension, J. of Composite Materials, 8 (1974) 200.

[38]   J.M.Whitney and M.Knight, The relationship between tensile strength and flexural strength in fiber-reinforced composite. Experimental Mechanics, 20 (1980) 211.

[39]   N.Viswanath and D.G.Bellow, Development of an equation for the wear of polymers. Wear, 181-183(1995)42-49

[40]   J.K. Lancaster,Friction and wear, in:A.D.Jenkins(Ed), polymer science:A material science hand book, North Holland, Amsterdam,959-1046(1972).

[41]   S.N.Ratner, I.I.Farberova, O.V.Radynkevich and E.G. Lure, Sov.Plast., 7 (1964) 37-47.

[42]   Poomali,Siddaramaiah,B.Suresha and Joong-HeeLee,Mechanical and three body abrasive wear behavior of PMMA/TPU blends, Material Sci.and Engg.,A 1-5(2008)

[43]   B.Suresha, C.Chandramohan,N.Dayanda Jawali and Siddaramaiah, Effect of short glass fiber content on three-body wear behaviour of polyurethane composites.J.of Composite materials,41(2007)2701-2713

 
 
Top