JMMCE  Vol.8 No.2 , February 2009
Engineering Research for Self-Reliance-Modeling and Simulation Perspective
Author(s) O. Oluwole*
ABSTRACT
Engineering research is a sine-qua-non for development of new products, new production processes, hence production lines in the quest for self reliance in any economy. Modeling and simulation is a veritable tool for such research and development. This paper presents the multifaceted use of modeling and simulation as decision tools for engineering facet of an economy drawing examples from two different engineering disciplines- Metallurgical and Civil.

Cite this paper
O. Oluwole, "Engineering Research for Self-Reliance-Modeling and Simulation Perspective," Journal of Minerals and Materials Characterization and Engineering, Vol. 8 No. 2, 2009, pp. 107-114. doi: 10.4236/jmmce.2009.82010.
References
[1]   Chen. Y. F. and W.S. Hwang, 1996. Mould Filling Simulation with Partial Cell Method. Trans American Foundrymen's Society , 104 , 197-201.

[2]   Chen C. W., Li C. R., Han T. H., Shei C. T., Hwang W. S and C.M. Houng, 1994. Numerical Simulation of Filling Pattern for an Industrial Die Casting and its Comparison with the defects distribution of an actual castings . Trans. of the American Foundrymen’s Society, 102 , 139-146.

[3]   Cheng C. Q., Upadhya G., Suri V. K., Atmakuri S and A.J Paul,1992. Solidification Modelling and Prediction of Defect of a sand cast Ductile Iron T-Plate. American Foudrymen Society. 20p

[4]   Ehlen G. Schweizer A. Ludwig A. and P.R Sahm, 2000. Free Surface Model to Predict the Influence of Shrinkage Cavities on the Solute Redistribution in Castings In: Modeling of Casting, Welding and Advanced Solidification Processes IX, ed. P.R. Sahm, P. N. Hansen, J. G. Conley, 632-63

[5]   Fackeldy. M, Ludwig. A and P.R. Sahm,, 1996. Coupled Modelling of the Solidification process predicting Temperature, Stresses and Microstructure Computational Material Science, 7(194-199).

[6]   Kroc.J (2002) ‘Application of Cellular Automata Simulations to Modelling of Dynamic Recrystallization. http://home.zcu.cz/~krocj/

[7]   Ludwig.A, 2001. Comparison of Dendrites of a pure Material with Thermal Alloy Dendrites. Acta Materiala, 49 , 165.

[8]   Marron.R.E, Wilkes.J.O and Pehlke.R.D(1970) Numerical Simulation of Solidification: Part 1: Low Carbon Steel Castings’T’Shape. AFS Metals Research Journal, 184-187

[9]   Oluwole.O.O and Olorunniwo. O.E (2007)“Simulation Studies of Effect of Ductile Iron’s Bull’s Eye on Stress Concentration under plane stress conditions” Journal of mineral and materials characterisation and engineering, Michigan Tech.Univ., USA. 6(2),79-101

[10]   Oluwole.O.O, Olorunniwo.O.E and Atanda.P.O (2007a)” Simulation of Riser Size from Mushy Zone of Unrisered AlSi7Mg Alloy” Journal of Applied Sciences Research ,Pakistan 3(10):908-912

[11]   O.O. Oluwole, G.O. Oluwadare and A.A. Afonja, (2007b), “Development of Mathematical Equation for Fraction of Solid in AlSi7Mg Alloy Solidification Simulation”. Journal of Minerals and Materials Characterization and Engineering, Michigan Technological University, USA.7(1),71-82

[12]   Pehlke.R.D and Kirt.M.J (1973) Numerical Simulation of Casting Solidification. AFS Cast Metals Research Journal, 49-55.

 
 
Top