Cite this paper
A. Adahama, A. Adeleke, A. Olulana and S. Ibitoye, "Effects of Stamped Charging on the Strength of Coke from the Weakly Caking Australian Agro-Allied Coal Blend Mixed with Coke Breeze," Journal of Minerals and Materials Characterization and Engineering
, Vol. 7 No. 4, 2008, pp. 347-353. doi: 10.4236/jmmce.2008.74027
 http://www.worldcoal.org, 5th September, 2007
Bujnowska B. and Collins, G.1992. “Coal tar pitch for improving coking properties of coal”,2nd
International Cokemaking Congress, London, Vol. 2, pp.93-116.
Hogan,W.T., 1992. “Coke in the United States: Capital investment and needed capacity for the 1990s”, 2nd
International cokemaking congress, London, Vol. 1, pp.55-60.
Krivandin, V. and Markov, B., 1980, Metallurgical Furnaces, 1st
edn., Mir Publishers,Moscow.
Lu, Q and Li, Z., 1987. “The coke properties and coking mechanism of preheating-stamping process”, 1st
International Cokemaking Congress, Essen, Supplementary volume, Section II.2.
Moitra, A.K., Banerjee, N.G.,Shrinkhande, K.Y., Sing, K., Raja, K. and Banerjee, S., ‘Studies on coal carbonization in India’, 1st
edn., Central Fuel Research Institute publication, Calcutta (1972).
http://www.ohiocitizen.org/campaigns/coke/maumee_05.24.2004.htm, 30th Auggust, 2008
Echterhoff, J., Killich, H.J., Frick, H., Kuyumcu, H.Z. and Petak, H., 1992. “Production of blast furnace coke by stamp charging and utilization of recycled coke breeze”, 2nd
International cokemaking congress, London, Vol. 2, pp.172-189.
Adeleke, A.O, Olulana, A.O, Adahama, A.B., Ibitoye, S.A., 2007. “Study on the Reliability of Coke Research Establishment Micum 40 formula to predict coke mecum 40 at the Ajaokuta steel plant, Nigeria”, Journal of Minerals & Materials Characterization & Engineering, Vol. 6,No. 2, pp. 135-142.
Tucker, J. and Everitt, G.,1992. “Coking pressure –its causes, measurement and control.” 2nd
International cokemaking congress, London,Vol.2, pp. 40-61.
Parthasarathy, R.P., Sharma, R.P., Ghosh, N.B. and Raju, V.U.,1992. “Coal selection and preparation steps towards improving coke quality in SAIL”,2nd
International cokemaking congress, London, vol. 2, pp.152-171.
Addes, V.I., ‘Study of coal charge lateral contraction related to the pushing performance’. In Proc. 2nd
International cokemaking congress, London, pp.70-92 (1992).
Beckmann, R. and Meyer, G., ‘Seven years of operating experience with the world’s largest coke oven battery at Krupp Mannesmann Steelworks. In Proc. 2nd
International cokemaking congress, London, Vol. 1, pp.62-92 (1992).
Prasad, H.N. ,Rao, P.V.T., Podder, N.N. and Chaterjee, A., ‘Selection of coals by classical top charging’. In Proc. 2nd
International cokemaking congress, London, Preprints vol.1, pp.231-235 (1992).
Raw Materials Specifications, 1994, for Federal Government Steel Companies, 1st
http://www.phione.co.uk/coke/#kinds_of_coke , 14th January, 2008.
http://www.jellinbah.com.au/libraryFiles/Jellinbah, 14th January, 2008
Salvatore, E., Capogrosso, L., de Franco, F. and Barnaba, P.,’ Strategy of Ilva Taranto works on the coke and coal use in ironmaking’. In Proc. 2nd
International cokemaking congress, London, Vol. 2, pp. 93-114 (1992).
National Metallurgical Development Centre(NMDC) Trainees’ Report, on pilot scale carbonization study at Deutsche Montane Technologie(DMT), Germany (1992).