JMMCE  Vol.7 No.2 , June 2008
Studies of The Mechanism of Polyvinyl Alcohol Adsorption on The Calcite/Water Interface in The Presence of Sodium Oleate
ABSTRACT
The adsorption behavior of polyvinyl alcohol (PVA) on the CaCO3/solution interface under the influence of sodium oleate (SOl) interaction was investigated by the adsorbed amount, FTIR spectra, X-Ray diffraction and zeta potential. Effects of solid to liquid ratio and temperature was also examined. Observed increase of the PVA adsorption in presence of the sodium oleate resulted from a polymer-surfactant complex formation. The surfactant also influences on the structure of the adsorbed polymer layers. This effect was proved by adsorption measurements that allow calculation of the thickness of the adsorbed layer of the polymer on the surface of CaCO3 in the presence and the absence of sodium oleate. The interaction between oleate anions and PVA is a physical type (via hydrogen bonding).

Cite this paper
N. LABIDI and A. DJEBAILI, "Studies of The Mechanism of Polyvinyl Alcohol Adsorption on The Calcite/Water Interface in The Presence of Sodium Oleate," Journal of Minerals and Materials Characterization and Engineering, Vol. 7 No. 2, 2008, pp. 147-161. doi: 10.4236/jmmce.2008.72012.
References
[1]   Starov, V. M., Serguei R. K.; and Manuel, G. Velardey., 2000, J. Colloid Interface Sci, 227, 185–190.

[2]   Emil, J., and Chibowski, S., 2005 Surface free energy and wettability of silyl layers on silicon determined from contact angle hysteresis, Advances in Colloid and Interface Science, 30, 121-131.

[3]   Bajpai, A.K., and Vishwakarma, N., 2003, Colloids and surfaces, A: Physicochemical and Engineering Aspects, 220, 117-130.

[4]   Killmann, E., Maier, H., Baker, J.A., (1988), Hydrodynamic layer thickness of various adsorbed polymers on precipitated silica and polystyrene latex, Colloids Surf, 31,51–71

[5]   Chibowski, S., Paszkiewicz, M., 2001, Studies of the influence of acetate groups from polyvinyl alcohol on adsorption and electrochemical properties of the TiO2-polymer solution interface, J. Dispers. Sci. Technol, 22, 281–289.

[6]   Boisvert, J.P., Persello, J., Guyard, A., 2003, Influence of the surface chemistry on the structural and mechanical properties of silica-polymer composites, J.Polym. Sci, Part B : Polym. Phys, 41, 3127–3138.

[7]   Rachas, I., Tadros, T. F., Taylor, P., 2000, The displacement of adsorbed polymer from silica surfaces by the addition of a nonionic surfactant, Colloids Surf, A: Physicochem. Eng. Aspects 161, 307–319.

[8]   Pattanayek, S.K., Juvekar, V.A., 2002, Prediction of adsorption of nonionic polymers from aqueous solutions to solid surfaces, Macromolecules 35, 9574–9585.

[9]   Gibson, F.W., Davis, R.M., Riffle, J.S., 1997, Adsorption ofwater-soluble polymers on submicron oxide particles, Polym. Preprints, 38 642–643.

[10]   Chibowski, S., 1996, Investigation of the mechanism of polymer adsorption on a metal oxide/water solution interface, Adsorp. Sci. Technol, 14, 179–188.

[11]   Meiron, T.S., Marmur, A., Saguy, I.S., 2004, J. Colloid Interf. Sci, 27,437–644.

[12]   Otsuka, H., and Esumi, K., 1994, Langmuir, 10, 45.

[13]   Cosgrove, T., Mears, S. J., Obey, T., Thompson, L., and Wesley, R. D., 1999,Colloids Surf, 149, 329–338 .

[14]   Kilau, H. W., and Voltz, J. I., 1991, Colloids Surf, 57, 17.

[15]   Fleming, B. D., Wanless, E. J., and Biggs, S., 1999, Langmuir 15, 8719.

[16]   Pritchard, J.G., Akintola, D.A., 1972, Talanta. 19 ,877.

[17]   bren, C., Cleeg, F.,.Hughes T.L., and Yarwood,J., 2000, Langmuir, 16,6488-6656.

[18]   Rdziviolava, I.S., Ovchinnikova, G.P., Artemenko, S.E., Dmitrienko, T.G., 2004, Study of the thikness of polymer adsorption layerson the fibre surface, Fibre Chemistry,36(2) ,139-140.

[19]   Moulin, P., Roques, H., 2003, Zeta potential measurement of calcium carbonate, Journal of Colloid and Interface Science, 261, 115–126.

[20]   Koopal, L., Hlady, V., Lyklema, J., 1988, Electrophoretic study of polymer adsorption: Dextrin, polyethylene oxide and polyvinyl alcohol on silver iodide, Journal of Colloids and Interface Science, 121 (1), 49-62.

[21]   M’pandou, A., Siffert, B., 1987, Polyethylene glycol adsorption at TiO2/H2O interface:Distortion of ionic structure and shear plane position,Colloids and Surfaces,24,159-172.

[22]   Baran, A.A., Kocherga, I.I., Solomentseva, I.M., 1984, Ukr. Khim. Zhurn. 50, 1162.

[23]   Somasundaran, P.,Zhang,L.,2006,Journal of Petroleum Science and Engineering, 52,98–212.

[24]   Owen, A.T.,Fawell, P.D., Swiftand, JD., Farraow,J.B., 2002,Int.J.Mineral Processing,67,1-4.

[25]   Chibowski, S., Paszkiewicz, M., Krupa, M., 2000, Investigation of the influence of the polyvinyl alcohol adsorption on the electrical properties of Al2O3–solution interface, thickness of the adsorption layers of PVA, Powder Technology, 107 (3), 251-255.

[26]   Chibowski, E., Opala, M., and Patkowski, J., 2005, Influence of the ionic strength on the adsorption properties of the system dispersed aluminium oxide–polyacrylic acid, Materials Chemistry and Physics, 93, 262–271.

[27]   Nakamoto, K., 1986, Infrared and Raman Spectra of Inorganic and Coordination Compounds, New York: Wiley-Interscience, p24, 4th ed.

[28]   Legodi, M.A., Dewaal, D., Potgieter, J.H., 2001, Appl. Spectrosc, 55, 361.

[29]   Kumar, V., and Raju, G.B., 2002, Adsorption of oleic acid at sillimanite/water interface, Journal of colloid and Interface Science, 247, 275-281.

[30]   Young, C.A., Miller, J.D., 2000, Int. J. Miner, Process, 58, 331-350.

[31]   Wang, T., Turhan, M., Gunasekaran, S., 2004, Polym. Int,53, 911.

[32]   Daifullah, A.A.M., Girgis, B.S., and Gad, H.M.H., 2003, Utilization of agro-residues (rice husk) in small waste water treatment plans, Materials Letters, 57, 1723–1731.

[33]   Bajpai, A.K., Vishwakarma, N., 2003, Adsorption of polyvinylalcohol onto Fuller’s earth surfaces, Colloids and Surfaces, A: Physicochem. Eng. Aspects, 220 117-130.

[34]   Pattanayek, S.K., Juvekar, V.A., 2002, Prediction of adsorption of nonionic polymers from aqueous solutions to solid surfaces, Macromolecules, 35, 9574–9585.

[35]   Besra, L., Sengupta, D. K., Roy, S. K., and Ay, P., 2003, Influence of surfactants on flocculation and dewatering of kaolin suspensions by cationic polyacrylamide (PAM-C) flocculant, Separation and Purification Technology,30, 251-264.

[36]   Santhiya, D., Subramanian, S., Natarajan, K. A., and Malghan, S. G.,1999,Surface Chemical Studies on the Competitive Adsorption of Poly (acrylic acid) and Poly (vinyl alcohol) onto Alumina, Journal of Colloid and Interface Science, 216,143–153.

[37]   Suzuki, F., Nakane, K., and Piao, J.S., 1996, J.Mater.Sci, 31, 1335.

[38]   Somasundaran, P., Amankonah, J. O., and Ananthapadmabhan, K.P., 1985, Mineralsolution equilibria in sparingly soluble Mineral systems, Colloids and Surfaces, 15, 309-333.

[39]   Vdovic, N., and Bisgdanc, J., 1998, Electrokinetics of natural and synthetic calcite suspensions, Colloids and Surfaces, A: Physicochemical and Engineering Aspects, 137,7-14.

[40]   Cleverdon, J., Somasundaran, P., 1985, A study of polymer/surfactant interaction at the mineral/solution interface, Miner.Metall. Process, 2,231.

 
 
Top