Back
 EPE  Vol.4 No.4 , July 2012
Preliminary Design Support by Integrating a Reliability Analysis for Wind Turbine
Hamid Zaghar*, Mohammed Sallaou, Ali Chaaba
Show more
Abstract: In the context of industrial competitiveness, taking into account the process design throughout the product life cycle is inevitable, from the expression of the need to recycle, the capitalization and knowledge management increasingly a target much sought after companies because of increased knowledge. Indeed, during the approval phase and use studies and scientific researches make have generated knowledge especially that concerning the reliability of system components. In this context, the capitalization and reuse of knowledge are necessary and have a particular interest in design and particularly in the preliminary design phase. Studies are already completed suggest a design process ranging from the need to solve the problem. At each phase of the process, structural characteristics are defined by the designer through the available knowledge already capitalized to make choice of component and their arrangement. This article proposes integrating the analysis of system reliability in this process. The objective is the use of knowledge in the vision safety and hazards of operating through the study of reliability and decision making for the selection of solution.
Keywords: Preliminary Design; Reliability; Wind Turbine; Gearbox
Cite this paper: H. Zaghar, M. Sallaou and A. Chaaba, "Preliminary Design Support by Integrating a Reliability Analysis for Wind Turbine," Energy and Power Engineering, Vol. 4 No. 4, 2012, pp. 233-240. doi: 10.4236/epe.2012.44032.
References

[1]   D. G. Ullman, “The Mechanical Design Process,” 3rd Edition, McGraw-Hill Higher Education, New York, 2003.

[2]   L. Zimmer and P. Zablit, “Global Aircraft Predesigned Based on Constraint Propagation and Interval Analysis,” Proceedings of CEAS Conference on multidisciplinary Aircraft design and Optimization, K?ln, 25 June 2001.

[3]   X. Fischer, P. Sébastian, J. P. Nadeau and P. Joyot, “Conception Inversée Intégrée: Pré-Dimensionnement de Produits Par Satisfaction de Contraintes,” Mécanique et Industrie, Vol. 3, No. 4, 2002, pp. 593-606. doi:10.1016/S1296-2139(02)01204-6

[4]   M. Sallaou, J. Pailhès and J. P. Nadeau, “Taxonomie des Connaissances en Conception Préliminaire,” CFM 2009, Marseille, 2009.

[5]   F. Spinato, P. J. Tavner, G. J. W. Van Bussel and E. Koutoulakos, “Reliability of Wind Turbine Subassemblies,” IET Renewable Power Generation, Vol. 3, No. 4, 2009, pp. 1-15. doi:10.1049/iet-rpg.2008.0060

[6]   M. Sallaou, “Taxonomie des Connaissances et Exploitation en Conception Préliminaire,” Application à un Système Eolien, Thèse, ENSAM CER, Bordeaux, 2008.

[7]   K. Smolders. “Reliability Analysis of Gearbox,” RELI- AWIND Project Report—Task 2.4, 2009.

[8]   S. D. Savransky, “Engineering of Creativity: Introduction to TRIZ Methodology of Inventive Problem Solving,” CRC Press, London, 2000. doi:10.1201/9781420038958

[9]   P. Jér?me, M. Sallaou, J. P. Nadeau and G. M. Fadel., “Energy Based Functional Decomposition in Preliminary Design,” Journal of Mechanical Design, Vol. 133, No. 5, 2011, 12 p.

[10]   R. Harrison and G. Jenkins, “Parametric Cost Modeling of Wing Energy Conversion Systems,” 9th BWEA Conference, Edinburgh, 1987, pp. 259-264.

[11]   R. Harrison, G. Jenkins and R. J. Taylor, “Cost Modeling of Horizontal Axis Wind Turbines—Results and Conclusions,” Wind Engineering, Vol. 13, No. 6, 1989, pp. 315-323.

[12]   R. Harrison and G. Jenkins, “Cost Modeling of Horizontal Axis Wind Turbines,” ETSU W/34/00170/REP, University of Sunderland, Sunderland, 1994.

[13]   R. Billinton and H. Chen, “Assessment of Risk-Based Capacity Benefit Factors Associated with Wind Energy Conversion Systems,” IEEE Transactions on Power Systems, Vol. 13, No. 3, 1998, pp. 1191-1196. doi:10.1109/59.709119

[14]   P. J. Tavner, J. Xiang and F. Spinato, “Reliability Analysis for Wind Turbines,” Wind Energy, Vol. 10, No. 1, 2007, pp. 1-18. doi:10.1002/we.204

[15]   K. Smolders, H. Long, Y. Feng and P. J. Tavner, “Reliability Analysis and Prediction of Wind Turbine Gearboxes,” European Wind Energy Conference, Warsaw, 20-23 April 2010.

[16]   G. Spinnler, “Conception des Machines: Principes et Applications,” Presses Polytechniques et Universitaire Romandes, Lausanne, 2001.

[17]   NSWC07, “Handbook of Reliability Prediction Procedures for Mechanical Equipment,” 2007.

 
 
Top