CS  Vol.3 No.3 , July 2012
Study of New Planar Resonator’s Topologies Little Perceptible in Variations of Substratum’s Height
ABSTRACT
The mobile communication (radio, mobile, satellite telephony…) insert band filters which are required to comply with stringent pass-band characteristics concerning the selectivity, the group delay, the insertion losses and the mass and volume. The mass and volume of payload electronic equipment is a significant contributor to the overall cost of space systems. Within this framework, many improvements were made in the design of filters and multiplexers which represent a considerable portion of the overall satellite payload. The High Temperature Superconducting (HTS) planar technology permits to realize compact size filtering devices. Moreover, it could also provide a superior performance not attainable by any other technology. However, not controllable parameters in the manufacturing processes (indistinctness of the engraving, the not uniformity of substratum thickness) do not allow to obtain a precision on the echo’s frequency and to keep a high quality factor. So, it is necessary to use method to tune the center frequency of filters after the fabrication or to study new resonator topologies which present lower sensitivity to LAIO3 substrate thickness. This last point is the object of this article.

Cite this paper
N. Zrigui, L. Zenkouar and S. Bri, "Study of New Planar Resonator’s Topologies Little Perceptible in Variations of Substratum’s Height," Circuits and Systems, Vol. 3 No. 3, 2012, pp. 223-229. doi: 10.4236/cs.2012.33031.
References
[1]   G. Huot, “Cofabrication Monolithique de Capteurs à Supraconducteur YBa2Cu3O7δ et d’une Electronique Supraconductrice sur Même Substrat de Silicium,” Ph.D. Thesis, Caen University, Caen, 2004.

[2]   Wikipedia. http://fr.wikipedia.org/wiki/Oxyde_mixte_de_baryum_de_cuivre_et_d’yttrium

[3]   E. Picard, “Filtres Planaires en Technologies Innovantes Pour des Applications Multimédia,” Ph.D. Thesis, Limoges university, Limoges, 2004.

[4]   S. Moraud, “Etude et Conception de Nouvelles Technologies de Filtres Destinés à être Intégrés aux Différents Niveaux de la Charge Utile d’un Satellite de Télécommunications,” Ph.D. Thesis, Limoges university, Limoges, 1998.

[5]   S. B. Cohn, “Microwave Band Pass Filters Containing High Q Dielectric Resonators,” IEEE Transactions on Microwave Theory and Techniques, Vol. 16, No. 4, 1968, pp. 218-227. doi:10.1109/TMTT.1968.1126654

[6]   S. J. Fiedziusko, “Dual Mode Dielectrics Resonator Loaded Cavity Filters,” IEEE Transactions on Microwave Theory and Techniques, Vol. 30, No. 9, 1982, pp. 1311-1316. doi:10.1109/TMTT.1982.1131253

[7]   D. Baillargeat, “Analyse Globale de Dispositifs Microondes par la Méthode des Eléments Finis. Application aux Filtres à Résonateurs Diélectriques,” Ph.D. Thesis, Limoges University, Limoges, 1995.

[8]   S. Courreges, “Les Matériaux Ferroélectriques et Supraconducteurs Appliqués à la Conception de Dispositifs Microondes,” Ph.D. Thesis, Limoges University, Limoges, 2007.

[9]   K. Lascaux, “Analyse, Conception et Réalisation de Dispositifs Microondes Planaires Supraconducteurs en Bande Ka: Applications aux Systèmes de Communication par Satellites,” Ph.D. Thesis, Limoges University, Limoges, 2002.

[10]   M. V. Jacob, J. Mazierska, N. Savvides, S. Ohshima and S. Oikawa, “Comparison of Microwave Properties of YBCO Films on MgO and LaAlO3 Substrates,” Physica C: Superconductivity, Vol. 372-376, 2002, pp. 474-477. doi:10.1016/S0921-4534(02)00725-6

[11]   H. R. Yi, S. K. Remillard and A. Abdelmonem, “A Novel Ultra-Compact Resonator for Superconducting Thin-Film Filters,” IEEE Transaction on Microwave Theory and Techniques, Vol. 51, No. 12, 2003, pp. 2290-2296.accepted

 
 
Top