Back
 JSIP  Vol.3 No.2 , May 2012
Neural Network Approach to Modelling the Behaviour of Ionic Polymer-Metal Composites in Dry Environments
Abstract: Ionic polymer-metal composites (IPMCs) are especially interesting electroactive polymers because they show large a deformation in the presence of a very low driving voltage (around 1 - 2 V) and several applications have recently been proposed. Normally a humid environment is required for the best operation, although some IPMCs can operate in a dry environment, after proper encapsulation or if a solid electrolyte is used in the manufacturing process. However, such solutions usually lead to increasing mechanical stiffness and to a reduction of actuation capabilities. In this study we focus on the behaviour of non-encapsulated IPMCs as actuators in dry environments, in order to obtain relevant information for design tasks linked to the development of active devices based on this kind of smart material. The non-linear response obtained in the characterisation tests is especially well-suited to modelling these actuators with the help of artificial neural networks (ANNs). Once trained with the help of characterisation data, such neural networks prove to be a precise simulation tool for describing IPMC response in dry environments.
Cite this paper: A. Díaz Lantada, P. Lafont Morgado, J. Luis Muñoz Sanz, J. Manuel Muñoz Guijosa and J. Echávarri Otero, "Neural Network Approach to Modelling the Behaviour of Ionic Polymer-Metal Composites in Dry Environments," Journal of Signal and Information Processing, Vol. 3 No. 2, 2012, pp. 137-145. doi: 10.4236/jsip.2012.32018.
References

[1]   M. Shahinpoor and K. J. Kim, “Ionic Polymer-Metal Composites: I Fundamentals,” Smart Materials and Structures, Vol. 10, No. 4, 2001, pp. 819-833. doi:10.1088/0964-1726/10/4/327

[2]   Y. Bar-Cohen, S. Leary, M. Shahinpoor, J. O. Harrison and J. Smith, “Electro-Active Polymer (EAP) Actuators for Planetary Applications,” Proceedings of SPIE’s 6 Annual International Symposium on Smart Structures and Materials, Newport Beach, 1-5 March 1999, Paper No. 3669-05.

[3]   Y. Bar-Cohen, “Electroactive Polymers as Artificial Muscles: Current Capabilities and Challenges,” SPIE Press, Bellingham, 2006.

[4]   S. Nemat-Nasser and J. Y. Li, “Electromechanical Response of Ionic Polymer-Metal Composites,” Journal of Applied Physics, Vol. 87, No. 7, 2000, pp. 3321-3332. doi:10.1063/1.372343

[5]   S. Nemat-Nasser, “Micromechanics of Actuation of Ionic Polymer-Metal Composites,” Journal of Applied Physics, Vol. 92, No. 5, 2002, pp. 2899-2951. doi:10.1063/1.1495888

[6]   P. Brunetto, L. Fortuna, S. Graziani and S. Strazzeri, “A Model of Ionic Polymer-Metal Composite Actuators in Underwater Operations,” Smart Materials and Structures, Vol. 17, 2002, Article ID 025029.

[7]   J. Choonghee, E. Hani, E. Naguib and R. H. Kwon, “Modeling and Optimization of the Electromechanical Behavior of an Ionic Polymer-Metal Composite,” Smart Materials and Structures, Vol. 17, 2008, Article ID 065022.

[8]   C. Bonomo, L. Fortuna, P. Giannone and S. Graziani, “A Method to Characterize the Deformation of an IPMC Sensing Membrane,” Sensors and Actuators A: Physical, Vol. 123-124, 2005, pp. 146-154. doi:10.1016/j.sna.2005.03.012

[9]   T. Yokota, K. Kikuchi and S. Tsuchitani, “Evaluation of Basic Operating Characteristics of Ion Conductive Polymer Actuator Using Ionic Liquid,” SICE Annual Conference, Sakaedani, 20-22 August 2008, pp. 1096-1099.

[10]   S. Guo, T. Fukuda and K. Asaka, “A New Type of FishLike Underwater Microrobot,” IEEE/ASME Transactions on Mechatronics, Vol. 8, No. 1, 2003, pp. 136-141. doi:10.1109/TMECH.2003.809134

[11]   B. Kim, J. Ryu, Y. Jeong, Y. Tak, B. Kim and J.-O. Park, “A Ciliary Based 8-Legged Walking Micro Robot Using Cast IPMC Actuators,” Proceedings of IEEE International Conference on Robots and Automation, Vol. 3, 2003, pp. 2940-2945.

[12]   S. Guo, T. Fukuda, K. Kosuge, F. Arai, and M. Negoro, “Microcatheter System with Active Guide Wire,” Proceedings of IEEE International Conference on Robotics and Automation, Vol. 1, 21-27 May 1995, pp. 79-84.

[13]   H.-H. Lin, B.-K. Fang, M.-S. Ju, C. Ching and K. Lin, “Control of Ionic Polymer-Metal Composites for Active Catheter Systems via Linear Parameter-Varying Approach,” Journal of Intelligent Material Systems and Structures, Vol. 20, No.3, 2009, pp. 273-282. doi:10.1177/1045389X08093565

[14]   Y. Bar-Cohen, S. Leary, M. Shahinpoor, J. O. Harrison and J. Smith, “Flexible Low-Mass Devices and Mechanisms Actuated by Electroactive Polymers,” Proceedings of SPIE, Vol. 3669, 1999, pp. 51-56. doi:10.1117/12.349697

[15]   S. Tadokoro, S. Yamagami and M. Ozawa, “Soft Micromanipulation Device with Multiple Degrees of Freedom Consisting of High Polymer Gel Actuators,” Proceedings of IEEE International Conference on Micro Electro Mechanical Systems, 17-21 January 1999, pp. 37-42.

[16]   R. Lumia and M. Shahinpoor, “Microgripper Design Using Electroactive Polymers,” In: Y. Bar-Cohen, Ed., Smart Structures and Materials 1999: Electroactive Polymer Actuators and Devices, SPIE, Bellingham, 1999, pp. 322-329.

[17]   S. J. Lee, M. J. Han, Se. J. Kim, J. Y. Jho, H. Y. Lee and Y. H. Kim, “A New Fabrication Method for IPMC Actuators and Application to Artificial Fingers,” Smart Materials and Structures, Vol. 15, No. 5, 2006, pp. 1217-1224. doi:10.1088/0964-1726/15/5/008

[18]   C. Bonomo, M. Bottino, P. Brunetto, G. Di Pasquale, L. Fortuna, S. Graziani and A. Pollicino, “Tridimensional Ionic Polymer Metal Composites: Optimization of the Manufacturing Techniques,” Smart Materials and Structures, Vol. 19, No. 5, 2010, Article ID 055002. doi:10.1088/0964-1726/19/5/055002

[19]   S. J. Kim, I. T. Lee, H.-Y. Lee and Y. H. Kim, “Performance Improvement of an Ionic Polymer-Metal Composite Actuator by Parylene Thin Film Coating,” Smart Materials and Structures, Vol. 15, No. 6, 2006, p. 1540.

[20]   B. C. Lavu, M. P. Schoen and A. Mahajan, “Adaptive Intelligent Control of Ionic Polymer-Metal Composites,” Smart Materials and Structures, Vol. 14, No. 4, 2005, pp. 466-474. doi:10.1088/0964-1726/14/4/002

[21]   R. J. Schalkoff, “Artificial Neural Networks,” Mc Graw Hill, New York, 1997.

[22]   S. Haykin, “Neural Networks: A Comprehensive Foundation,” 2nd Edition, Prentice Hall, Englewood Cliffs, 1999.

[23]   A. D. Lantada, “Metodología Para el Desarrollo de Dispositivos Médicos Basados en el Empleo de Polímeros Activos Como Sensores y Actuadores,” Ph.D. Thesis, Universidad Politécnica de Madrid, Madrid, 2009.

[24]   G. Diaz, M. Sen, K. T. Yang and R. L. Mc Clain, “Simulation of Heat Exchanger Performance by Artificial Neural Networks,” International Journal HVAC & Research, Vol. 5, No. 3, 1999, pp. 195-208,.

[25]   G. Diaz, M. Sen, K. T. Yang and R. L. Mc Clain, “Dynamic Prediction and Control of Heat Exchangers Using Artificial Neural Networks,” International Journal of Heat Mass Transfer, Vol. 44, No. 9, 2001, pp. 1671-1679. doi:10.1016/S0017-9310(00)00228-3

[26]   M. Gad-el-Hak, Ed., “The MEMS Handbook,” CRC Press, New York, 2002.

[27]   S. Gulati and M. Zak, “Neural-Network Approach to Analysis of Sensor Data,” NASA Technology Briefs, 2000.

[28]   W. A. Rakowski and S. Zimowski, “Polyesterimide Composites as a Sensor Material for Sliding Bearings,” Composites Part B: Engineering, Vol. 37, No. 2-3, 2006, pp. 81-88. doi:10.1016/j.compositesb.2005.09.002

[29]   P. Manoonpong, F. Pasemann and J. Fischer, “Neural Processing of Auditory-Tactile Sensor Data to Perform Reactive Behaviour of Walking Machines,” Proceedings of the IEEE International Conference on Mechatronics and Robotics, 3-5 June 2004.

[30]   W. D. Stiehl, D. Liebermann, C. Breazeal, L. Basel, L. Lalla and M. Wolf, “Design of a Therapeutic Robot Companion for Relational, Affective Touch,” Proceedings of the 2005 IEEE International Workshop on Robots and Human Interactive Communication, Cambridge, 13-15 August 2005, pp. 408-415. doi:10.1109/ROMAN.2005.1513813

[31]   H. Demuth, M. Beale and M. Hagan, “Neural Networks ToolboxTM User’s Guide,” The Mathworks Inc., 1992-2009, Online Only, Revised for Version 6.0.3.

[32]   E. Bautista Paz, J. Echávarri Otero, J. M. Munoz-Guijosa, A. Díaz Lantada, P. Lafont, J. M. García, J. L. Munoz Sanz and H. L. Yustos, “Simulink Model for Teaching the Stick—Slip Friction Phenomenon in ‘Machine Vibration and Noise’ Course,” International Journal of Engineering Education, Vol. 25, No. 2, 2009, pp. 102-111.

 
 
Top