Back
 JEMAA  Vol.1 No.1 , March 2009
The Online Assessment of Electric Distribution Network Load Capability
Abstract: To improve the security and reliability of a distribution network, several issues, such as influences of operation con-strains, real-time load margin calculation, and online security level evaluation, are with great significance. In this pa-per, a mathematical model for load capability online assessment of a distribution network is established, and a repeti-tive power flow calculation algorithm is proposed to solve the problem as well. With assessment on three levels: the entire distribution network, a sub-area of the network and a load bus, the security level of current operation mode and load transfer capability during outage are thus obtained. The results can provide guidelines for prevention control, as well as restoration control. Simulation results show that the method is simple, fast and can be applied to distribution networks belonged to any voltage level while taking into account all of the operation constraints.
Cite this paper: nullH. Liu, Z. Li, K. Yu and X. Chen, "The Online Assessment of Electric Distribution Network Load Capability," Journal of Electromagnetic Analysis and Applications, Vol. 1 No. 1, 2009, pp. 42-47. doi: 10.4236/jemaa.2009.11008.
References

[1]   S. Koizumi, M. Okumura, and T. Yanase, “Application and development of distribution automation system in TEPCO,” Proceedings of IEEE Power Engineering Society General meeting, Vol. 3, pp. 2429-2435, 2005.

[2]   R. D. Dunlop, R. Gutman and P. P. Marchenko, “Analytical development of loadability characteristics for EHV and UHV transmission line,” IEEE Transactions on Power Apparatus and System, 98, pp. 606-613, 1979.

[3]   H. D. Chiang, A. J. Flueck, K. S. Shah, and N. Balu, “CPFLOW: A practical tool for tracing power system steady-state stationary behavior due to load and generation variations,” IEEE Transactions on Power Systems, 10, pp. 623-634, 1995.

[4]   S. Greene, I. Dobson and F. L. Alvarado, “Sensitivity of transfer capability margins with a fast formula,” IEEE Transactions on Power Systems, 17, pp. 34-40, 2002.

[5]   Energy and Electric [1993] No. 228. (1999), “The planning and designing rule of urban power network,” 1st edition, China Electric Power Press, Beijing.

[6]   X. Li, P. Li, X. Zhu, G. Peng, and Y. Ou, “Evaluation construction size of district high voltage distribution networks,” Automation of electric power systems, 31, pp. 46-50, 2007.

[7]   R. E. Brown, A. P. Hanson, H. L. Willis, F. A. Luedtke, M. F. Born, and N. C. Raleigh, “Assessing the reliability of distribution systems,” IEEE Computer Applications in Power, 14, pp. 44-49, 2001.

[8]   J. Zhang, D. Luo, J. Yao, and W. Li, “Research on value of capacity-load ratio in urban power network planning based on the economical analysis,” Relay, 35, pp. 39-43, 2007.

[9]   S. Curcic, C. S. Ozveren, and K. L. Lo, “Computer-based strategy for the restoration problem in electric power distribution systems,” IEEE Proceedings-Generation, Transmission and Distribution, 144, pp. 389-398, 1997.

[10]   O. Yan and C. Singh, “Assessment of available transfer capability and margins,” IEEE Transactions on Power Systems, 17, pp. 463-468, 2002.

[11]   M. H. Gravener, and C. Nwankpa, “Available transfer capability and first order sensitivity,” IEEE Transactions on Power Systems, 14, pp. 512-518, 1999.

 
 
Top