EPE  Vol.4 No.3 , May 2012
Experimental Study on Vibration Control of Offshore Wind Turbines Using a Ball Vibration Absorber
Abstract: To minimize the excessive vibration and prolong the fatigue life of the offshore wind turbine systems, it is of value to control the vibration that is induced within the structure by implementing certain kinds of dampers. In this paper, a ball vibration absorber (BVA) is experimentally investigated through a series of shake table tests on a 1/13 scaled wind turbine model. The reductions in top displacement, top acceleration, bottom stress and platform stress of the wind turbine tower system subjected to earthquakes and equivalent wind-wave loads, respectively, with a ball absorber are examined. Cases of the tower with rotating blades are also investigated to validate the efficacy of this damper in mitigating the vibration of an operating wind turbine. The experimental results indicate that the dynamic performance of the tested wind turbine model with a ball absorber is significantly improved compared with that of the uncontrolled structure in terms of the peak response reduction.
Cite this paper: J. Li, Z. Zhang and J. Chen, "Experimental Study on Vibration Control of Offshore Wind Turbines Using a Ball Vibration Absorber," Energy and Power Engineering, Vol. 4 No. 3, 2012, pp. 153-157. doi: 10.4236/epe.2012.43021.

[1]   World Wind Energy Association, “World Wind Energy Report 2010,” WWEA, Bonn, 2011.

[2]   L. Duenas-Osorio, B. Basu. “Unavailability of Wind Turbines due to Wind-Induced Accelerations,” Engineering Structures, Vol. 30, No. 4, 2008, pp. 885-893. doi:10.1016/j.engstruct.2007.05.015

[3]   K. Argyriadis and N. Hille, “Determination of Fatigue Loading on a Wind Turbine with Oil Damping Device,” Proceedings of the 2004 EUROPEAN Wind Energy Conference & Exhibition, London, 22-25 November 2004, pp. 1-6.

[4]   T. Faber and P. Dalhoff, “Dynamic Behavior of Oil Dampers in Wind Turbine Tower,” Germanischer Lloyd Wind Engerie GmbH, Hamburg, 2005.

[5]   R. Collins, B. Basu and B.M. Broderick, “Optimal Design of Multi-Tuned Mass Damper (MTMDS) for Wind Turbine Towers Using SSA,” Proceedings of the SECED Young Engineers Conference, Bath, 21-22 March 2005, pp. 1-8.

[6]   J. P. Murtagh and B. Basu, “Along-Wind Response of a Wind Turbine Tower with Blade Coupling Subjected to Rotationally Sampled Wind Loading,” Engineering Structures, Vol. 27, No. 8, 2005, pp. 1209-1219. doi:10.1016/j.engstruct.2005.03.004

[7]   A. J. Wilmink and J. F. Hengeveld, “Application of Tuned Liquid Column Dampers in Wind Turbines,” Mecal Applied Mechanics BV, Enschede, 2005.

[8]   S. Colwell and B. Basu, “Tuned Liquid Column Dampers in offshore Wind Turbines for Structural Control,” Engineering Structure, Vol. 31, No. 2, 2008, pp. 358-368. doi:10.1016/j.engstruct.2008.09.001

[9]   M. Pirner, “Actual Behaviour of a Ball Vibration Absorber,” Wind Engineering and Industrial Aerodynamics, Vol. 90, No. 8, 2002, pp. 987-1005. doi:10.1016/S0167-6105(02)00215-5

[10]   D. Wang and J. Li, “Physical Random Function Model of Ground Motions for Engineering Purpose,” Science China Technological Sciences, Vol. 54, No. 1, 2011, pp.175-182. doi:10.1007/s11431-010-4201-3

[11]   X. Y. Bai, “Stochastic Optimal Control Analysis and Experimental Studies on Offshore Wind Turbine System,” Tongji University, Shanghai, 2011.

[12]   G. Q. Li and J. Li, “Theory and Application of Dynamic Testing on Engineering Structures,” Science Press, Beijing, 2002.