Back
 ENG  Vol.4 No.4 , April 2012
Modification and Development of a Blow Molding Machine
Abstract: This study is based on the modification and development of a two-liter plastic container blow molding machine into a five-liter one provided with a translucent view stripe. This study considers some objectives including reducing the total cost, increasing the amount of plastic recovery, and raising the desired plastic materials. Proper designs were prepared and directly applied on spot. Tangible results were obtained. Among others, the modification of some components of the machine, e.g. the extruder, has led to the possible reuse of the milled (recovery) and extra material from the manufacturing processes. That was also conducive to an effective reduction in the cost of production to 50% in some cases. Prior to its modification, this old machine was used to produce polyvinyl chloride (PVC) containers that have become prohibited these days for their damaging effect on man’s life. For now, and after modification, it has become possible to use High Density Polyethylene (HDPE) material, a fact that has improved labor conditions, too.
Cite this paper: B. Al-Helou, "Modification and Development of a Blow Molding Machine," Engineering, Vol. 4 No. 4, 2012, pp. 188-197. doi: 10.4236/eng.2012.44025.
References

[1]   A. K. Wood and R. Rasid, “Effect of Process Variable on Melt Velocity Profile In Extrusion Process Using Single Screw Plastics Extruder,” Plastic Rubber and Composites, Vol. 32, No. 5, 2003, pp. 193-198. doi:10.1179/146580103225002722

[2]   R. J. Crawford, “Plastics Engineering,” 3rd Edition, Butterwort-Heinemann, Oxford, 1998.

[3]   C. Rauwendaal, “Polymer Extrusion,” 3rd Revised Edition, Hanser Grander Publisher, New-York, 1994.

[4]   R. Alavi, S. A. Torabi Angaji and M. Z. Gholami, “Twin- Screw Extruder and Effective Parameters on the HDPE Extrusion Process,” Proceedings of World Academy of Science, Engineering and Technology, Vol. 37, 2009, pp. 204-207.

[5]   C. P. Yu, and J. M. Ro?sset, “Dynamic Analysis of Frames Using Continuous Dynamic Stiffness Matrix,” Tamkang Journal of Science and Engineering, Vol. 4, No. 4, 2001, pp. 37-45.

[6]   C. Prabodh Bolur, “Extrusion of thermoplastics,” Technical papers, 1998. http:/bolur.plastasia.com

[7]   N. Domingues, A. Gaspar-Cunha and J. A. Covas, “Computational and Experimental Study of Mixing in a Single Screw Extruder,” 10th ESAFORM Conference on Material Forming, American Institute of Physics 2007, Zaragoza, 18-20 April 2007, pp. 867-872.

[8]   T. Rydzkowski and G. Radomski, “Mixing Ratios Obtained Using Screw Disc and Screw Extruders, and Selected Properties of Mixture of Reglanulate and Original Material,” Plastics, Rubber and Composites, Vol. 37, No. 8, 2008, pp. 376-380. doi:10.1179/174328908X356473

[9]   J. Qu, B Xu, G. Jin, H. He and X. Peng, “Experimental Studies and Mathematical Modeling of Melt-Pulsed Conveying in Screw Extruders,” Polymer-Plastics Technology and Engineering, Vol. 45, No. 10, 2006, pp. 1137- 1142. doi:10.1080/03602550600887228

[10]   A. Thomas Shapler, “Accumulator Head for producing a Storage Drum with view stripe,” US Patent 4,802833, 1989.

[11]   M. Hirschberger, “Extrusion Head with Adjustable View Stripe Positioning,” US Patent 5,221,540, 1993.

[12]   A. Thomas Shapler, R. Thomas Buehler and M. Hirschberger, “Apparatus for Forming a Parison with a View Stripe,” US Patent 4,890,994, 1990.

 
 
Top