JSEMAT  Vol.2 No.2 , April 2012
Investigation of Surface Free Energy for PTFE Polymer by Bipolar Argon Plasma Treatment
ABSTRACT
The low ion energy argon plasma was used for surface modification of Poly tetra fluoroethylene (PTFE) polymer. The plasma was generated between two plane metal electrode by using 50 kHz bipolar power supply. The plasma treated surface was characterized by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The surface free energy (SFE) of plasma treated surface was calculated from contact angle measurement. SFE increases from 33.39 mJ/m2 to 41.40 mJ/m2 with the increase in plasma treatment time and the corresponding contact angle changed from 76? to 60?. XPS study shows that F/C ratio change from 1.8 (untreated) to 1.3 (treated) and O/C ratio changes from 0.094 (untreated) to 0.148 (treated). The XPS analysis shows that both F1s and the C1s spectra for PTFE are marginally modified by plasma treatment. AFM study shows that the average surface roughness (Ra) increased from 8.5 nm to 22.8 nm after plasma treatment. Vicker’s micro hardness of the film increases upon plasma treatment. The increase in SFE after plasma treatment is attributed to the functionalization of the polymer surface with hydrophilic groups as supported from the above observations.

Cite this paper
S. M. Pelagade, N. L. Singh, R. S. Rane, S. Mukherjee, U. P. Deshpande, V. Ganesan and T. Shripathi, "Investigation of Surface Free Energy for PTFE Polymer by Bipolar Argon Plasma Treatment," Journal of Surface Engineered Materials and Advanced Technology, Vol. 2 No. 2, 2012, pp. 132-136. doi: 10.4236/jsemat.2012.22021.
References
[1]   A. Vesel, M. Mozetic and A. Zalar, “XPS Characterization of PTFE after Treatment with RF Oxygen and Ni trogen Plasma”, Surface and Interface Analysis, Vol. 40, No. 3-4, 2008, pp. 661-663. doi:10.1002/sia.2691

[2]   S. R. Kim, “Surface Modification of Poly(Tetrafluoroethylene) Film by Chemical Etching, Plasma, and Ion Beam Treatments,” Journal of Applied Polymer Science, Vol. 77, No. 9, 2000, pp. 1913-1920. doi:10.1002/1097-4628(20000829)77:9<1913::AID-APP7>3.0.CO;2-#

[3]   R. Mikulikova, S. Montz, T. Gumpenberger, M. Olbrich, C. Romanin, L. Bacakova, V. Svorcik and J. Heitz, “Cell Microarrays on Photochemically Modified Polytetrafluoroethylene,” Biomaterials, Vol. 26, No. 27, 2005, pp. 5572- 5580. doi:10.1016/j.biomaterials.2005.02.010

[4]   L. Guzman, B. Y. Man, A. Miotello, M. Adami and P. M. Ossi, “Ion Beam Induced Enhanced Adhesion of Au Films Deposited on Polytetrafluoroethylene,” Thin Solid Film, Vol. 420, 2002, pp. 565-570. doi:10.1016/S0040-6090(02)00839-8

[5]   A. Oshima, H. Nagai, F. Muto, T. Miura and M. Washio, “High Performance PI/PTFE Layered Films Fabricated by EB Irradiation,” Journal of Photopolymer Science and Technology, Vol. 19, No. 1, 2006, pp. 123-127. doi:10.2494/photopolymer.19.123

[6]   E. Njatawidjaja, M. Kodama, K. Matsuzaki, K. Yasuda, T. Matsuda and M. Kogoma, “Hydrophilic Modification of Expanded Polytetrafluoroethylene (ePTFE) by Atmosphe- ric Pressure Glow Discharge (APG) Treatment,” Surface and Coatings Technology, Vol. 201, No. 3-4, 2006, pp. 699-706. doi:10.1016/j.surfcoat.2005.12.017

[7]   C.-M. Chan, T.-M. Ko and H. Hiraoka, “Polymer Surface Modification by Plasmas and Photons,” Surface Science Reports, Vol. 24, No. 1-2, 1996, pp. 1-54. doi:10.1016/0167-5729(96)80003-3

[8]   A. Vessel and M. Mozetic, “Surface Functionalization of Organic Materials by Weakly Ionized Highly Dissociated Oxygen Plasma,” Journal of Physics, Vol. 62, No. 1, 2009, pp. 1-20. doi:10.1088/1742-6596/162/1/012015

[9]   S. Mukherjee, J. Chakraborty, S. Gupta, P. M. Raole, P. I. John, K. R. M. Rao and I. Manna, “Low- and High-Energy Plasma Immersion Ion Implantation for Modification of Material Surfaces,” Surface and Coatings Technology, Vol. 156, No. 1-3, 2002, pp. 103-109. doi:10.1016/S0257-8972(02)00072-5

[10]   S. Pelagade, N. L. Singh, S. Shah, A. Qureshi, R. S. Rane, S. Mukherjee, U. P. Deshpande, V. Ganesan and T. Shripathi, “Surface Free Energy Analysis for Bipolar Pulsed Argon Plasma Treated Polymer Films,” Journal of Physics, Vol. 208, No. 1, 2010, pp. 1-8. doi:10.1088/1742-6596/208/1/012107

[11]   M. Sira, D. Trunec, P. St’ahel, V. Bursikova and Z. Na- vratil, “Surface Modification of Polycarbonate in Homogeneous Atmospheric Pressure Discharge”, Journal of Physics D: Applied Physics, Vol. 41, No. 1, 2008, pp. 015205-015212. doi:10.1088/0022-3727/41/1/015205

[12]   D. Papakonstantinou, E. Amanatides, D. Mataras, V. Ioannidis and P. Nikolopoulos, “Improved Surface Energy Analysis for Plasma Treated PET Films,” Plasma Processes and Polymers, Vol. 4, Suppl. 1, 2007, pp. S1057-S1062. doi:10.1002/ppap.200732405

[13]   D. K. Owen and R. C. Wendt, “Estimation of the Surface Free Energy of Polymers,” Journal of Applied Polymer Science, Vol. 13, No. 8, 1969, pp. 1741-1747. doi:10.1002/app.1969.070130815

[14]   D. P. Subedi, L. Zajickova, V. Bursikova and J. Janca, “Surface Modification of Polycarbonate (Bisphenol A) by Low Pressure rf Plasma”, Himalayan Journal of Sciences, Vol. 1, No. 2, 2003, pp. 115-118.

[15]   N. L. Singh, A. Qureshi, S. Mukherjee, A. K. Rakshit, A. Tripathi and D. K. Avasthi, “Surface Modification of Polymeric Blends by Nitrogen Plasma Implantation,” Surface & Coating Technology, Vol. 201, No. 19-20, 2007, pp. 8278-8281. doi:10.1016/j.surfcoat.2006.10.059

[16]   H. E. Lee, G. R. Rao and L. K. Mansur, “Hardness Enhancement and Crosslinking Mechanisms in Polystyrene Irradiated with High Energy Ion-Beams,” Materials Science Forum, Vol. 248, 1997, pp. 135-146. doi:10.4028/www.scientific.net/MSF.248-249.135

[17]   N. L. Singh, A. Qureshi, N. shah, A. K. Rakshit, S. Muk- herjee, A. Tripathi and D. K. Avasthi, “Surface Modification of Poly Ethylene Terephthalate by Plasma Treatment,” Radiation Measurements, Vol. 40, No. 2-6, 2005, pp. 746-750. doi:10.1016/j.radmeas.2005.01.014

[18]   A. Qureshi, S. Shah, S. Pelagade, N. L. Singh, S. Muk- herjee, A. Tripathi, U. P. Deshpande and T. Shripathi, “Surface Modification of Poly-carbonate by Plasma Treatment,” Journal of Physics, Vol. 208, No. 1, 2010, pp. 1-6. doi:10.1088/1742-6596/208/1/012108

 
 
Top