OJOPM  Vol.2 No.2 , April 2012
Effect of Nano-Filler on Structural and Ionic Transport Properties of Plasticized Polymer Electrolyte
Abstract: Polymer blend electrolytes, where PEO-PMMA polymer blend is used as polymer host matrix, doped with AgNO3 and plasticized with ethylene carbonate (EC) and Al2O3 as nano-filler were synthesized using the solution cast techniques. The polymer films were characterized by impedance spectroscopy, XRD, DSC, SEM, FT-IR and ionic transport mea-surements. The results indicate an enhancement in conductivity of PEO-PMMA-AgNO3-EC polymer electrolytes. The ionic conductivity of the polymer films is also found to increase with temperature. Electrical properties of polymer films in the framework of dielectric and modulus formalism are studied and discussed
Cite this paper: P. Sharma, D. Kanchan and N. Gondaliya, "Effect of Nano-Filler on Structural and Ionic Transport Properties of Plasticized Polymer Electrolyte," Open Journal of Organic Polymer Materials, Vol. 2 No. 2, 2012, pp. 38-44. doi: 10.4236/ojopm.2012.22006.

[1]   J. E. Bauerle, “Study of Solid Electrolyte Polarization by a Complex Admittance Method,” Journal of Physics and Chemistry of Solids, Vol. 30, No. 12, 1969, pp. 26572670.

[2]   P. V. Wright, “Polymer Electrolytes—The Early Days,” Electrochimica Acta, Vol. 43, No. 10-11, 1998, pp. 11371143.

[3]   V. D. Noto, S. Lavina, G. A. Giffin and E. Negro, “Polymer Electrolytes: Present, Past and Future,” Electrochimica Acta, Vol. 57, 2011, pp. 4-13.

[4]   J. Evans and C. A. Vincent, “Electrochemical Measurement of Transference Numbers in Polymer Electrolytes,” Polymer, Vol. 28, No. 13, 1987, pp. 2324-2328.

[5]   H. Block and A. M. North, “Dielectric Relaxation in Polymer Solutions,” Advances in Molecular Relaxation Processes, Vol. 1, No. 4, 1970, pp. 309-374.

[6]   M. R. Johan, O. O Shy, S. Ibrahim, S. M. M. Yassin and T. Y. Hue, “Effects of Al2O3 Nanofiller and EC Plasticizer on the Ionic Conductivity Enhancement of Solid PEO-LiCF3SO3 Solid Polymer Electrolyte,” Solid State Ionics, Vol. 196, No. 1, 2011, pp. 41-47.

[7]   P. Mahanandia and K. K. Nanda, “Anisotropic Electrical Transport Properties of Poly(Methyl Methacrylate) Infiltrated Aligned Carbon Nanotube Mats,” Applied Physics Letters, Vol. 100, No. 2, 2012, Article ID: 022108.

[8]   Z. Ahmad, N. A. Al-Awadi and F. Al-Sagheer, “Thermal Degradation Studies in Poly(Vinyl Chloride)/Poly(Methyl Methacrylate) Blends,” Polymer Degradation and Stability, Vol. 93, No. 2, 2008, pp. 456-465.

[9]   J. Qiao, J. Fu, R. Lin, J. Ma and J. Liu, “Alkaline Solid Polymer Electrolyte Membranes Based on Structurally Modified PVA-PVP with Improved Alkali Stability,” Polymer, Vol. 51, No. 21, 2010, pp. 4850-4859.

[10]   C. C. Yang, “Ni-MH Battery Based on PEO-PVA-KOH Polymer Electrolyte,” Polymer, Vol. 109, No. 1, 2002, pp. 22-31.

[11]   S. Radhakrishnan and P. D. Venkatachalapathy, “Effect of Casting Solvent on the Crystallization in PEO/PMMA Blends,” Polymer, Vol. 37, No. 16, 1996, pp. 3749-3752.

[12]   S. Ramesh, R. Shanti and R. Durairaj, “Effect of Ethylene Carbonate in Poly (Methyl Methacrylate)-Lithium Tetraborate Based Polymer Electrolytes,” Journal of NonCrystalline Solids, Vol. 357, No. 5, 2011, pp. 357-1363.

[13]   S. Ramesh and L. C. Wen, “Investigation on the Effects of Addition of SiO2 Nanoparticles on Ionic Conductivity, FTIR, and Thermal Properties of Nanocomposite PMMALiCF3SO3-SiO2,” Vol. 16, No. 3, pp. 255-262.

[14]   D. Keomany, J. P. Petit and D. Deroo, “Electrochemical Insertion in Sol-Gel Made Ceo2-Tio2 from Lithium Conducting Polymer Electrolyte: Relation with the Material Structure,” Solar Energy Materials and Solar Cells, Vol. 36, No. 4, 1995, pp. 397-408.

[15]   S. Ramesh, C. W. Liew, E. Morris and R. Durairaj, “Effect of PVC on Ionic Conductivity, Crystallographic Structural, Morphological and Thermal Characterizations in PMMA-PVC Blend-Based Polymer Electrolytes,” Thermochimica Acta, Vol. 511, No. 1-2, 2010, pp. 140146.