OJOPM  Vol.2 No.2 , April 2012
The Effect of Inorganic Nanoadditives on the Thermal, Mechanical and UV Radiation Barrier Properties of Polypropylene Fibres
Abstract: The objective of this study of modified polypropylene (PP) fibres using nanoadditives (nano-CaCO3 and Cloisite 30B) was to determine the influence of these additives on thermal and mechanical properties, but especially on the barrier properties of the nanocomposite fibres against UV radiation. The DSC data obtained from measurements of PP/CaCO3 or PP/C30B nanocomposite fibres were used for determination of the constants n and K of the Avrami equation and in the estimation of other thermal properties of the fibres, such as their crystallization half-time t1/2, rate of crystallization t1/2, the necessary time for maximum crystallization tmax and free energy per unit area of surface in the lamella perpen-dicular to the axis of a high-molecular chain se. The nano-CaCO3 or Closite 30B fillers (pre-treated separately in three different solvents: glycerine, acetone and water) did not influence the melting temperatures but caused an increase in PP crystallization temperatures in comparison with the pure PP fibres. The pre-treatments of nanoadditives resulted in increase of n, K, t1/2 values and decrease of t1/2, tmax as well as the values of free surface energies per unit area of the modified PP fibres. There was also observed a decrease in the mechanical properties, however, there was an increase of barrier properties against UV radiation of nanocomposite PP fibres in comparison with neat PP fibres, which was one of the main objectives of the study.
Cite this paper: A. Ujhelyiová, M. Slobodová, J. Ryba, E. Borsig and P. Vencelová, "The Effect of Inorganic Nanoadditives on the Thermal, Mechanical and UV Radiation Barrier Properties of Polypropylene Fibres," Open Journal of Organic Polymer Materials, Vol. 2 No. 2, 2012, pp. 29-37. doi: 10.4236/ojopm.2012.22005.

[1]   P. H. Nam, P. Maiti, M. Okamoto, T. Kotaka, N. Hasegawa and A. Usuki, “A Hierarchical Structure and Properties of Intercalated Polypropylene/Clay Nanocomposite,” Polymer, Vol. 42, No. 23, 2001, pp. 9633-9640.

[2]   M. Okamoto, S. Morita and T. Kotaka, “Dispersed Structure and Ionic Conductivity of Smectic Clay/Polymer Na- nocomposites,” Polymer, Vol. 42, No. 6, 2001, pp. 2685- 2688.

[3]   G. Z. Papageorgiou, D. S. Achilias, D. N. Bikiaris and G. P. Karayannidis, “Crystallization Kinetics and Nucleation Activity of Filler in Polypropylene/Surface-Treated SiO2 Nanocomposites,” Thermochimica Acta, Vol. 427, No. 1-2, 2005, pp. 117-128.

[4]   M. Joshi and B. S. Butola, “Studies on Nonisothermal Crystallization of HDPE/POSS Nanocomposites,” Polymer, Vol. 45, No. 14, 2004, pp. 4953-4968.

[5]   A. Chatterjee and B. L. Deopura, “Crystallization Behavior of PP and Carbon Nanofibre Blends,” Fibers and Polymers, Vol. 4, No. 3, 2003, pp. 102-106.

[6]   J. Ebenhoch, “Z?h Und Hitzebest?nding: Neue Silikonpartikel Für Duroplaste,” Kunststoffe, Vol. 94, No. 12, 2004, pp. 162-165.

[7]   F. Rault, E. Pleyber, C. Campagne, M. Rochery, S. Giraud, S. Bourbigot and E. Devaux, “Effect of Manganese Nanoparticles on the Mechanical, Thermal and Fire Properties of Polypropylene Multifilament Yarn,” Polymer Degradation and Stability, Vol. 94, No. 6, 2009, pp. 955-964.

[8]   Q. Yuan, S. Awate and R. D. K. Misra, “Nonisothermal Crystallization Behavior of Polypropylene-Clay Nanocomposites,” European Polymer Journal, Vol. 42, No. 9, 2006, pp. 1994-2003.

[9]   A. Al-Mulla, J. Mathew, S. K. Yeh and R. Gupta, “Nonisothermal Crystallization Kinetics of PBT Nanocomposites,” Composites Part A: Applied Science and Manufacturing, Vol. 39, No. 2, 2008, pp. 204- 217.

[10]   R. Philips and J. A. E. Manson, “Prediction and Analysis of Nonisothermal Crystallization of Polymers,” Journal of Polymer Science Part B: Polymer Physics, Vol. 35, No. 6, 1997, pp. 875-888.

[11]   Mc. Di Lorenzo and C. Silvestre, “Non-Isothermal Crystallization of Polymers,” Progress in Polymer Science, Vol. 24, No. 6, 1999, pp. 917-950.

[12]   F. Perrin-Sarazin, M. T. Ton-That, M. N. Bureau and J. Denault, “Micro- and Nano-Structure in Polypropylene/Clay Nanocomposites,” Polymer, Vol. 46, No. 25, 2005, pp. 11624-11634.

[13]   A. K. Sarkar, “Textiles for UV Protection,” In: R. A. Scott, Eds., Textiles for Protection, Woodhead Publishing Ltd., Sawston, 2005, pp. 355-377.

[14]   A. K. Sarkar, “An Evaluation of UV Protection Imparted by Cotton Fabrics Dyed with Natural Colorants,” BMC Dermatology, Vol. 4, No. 1, 2004, p. 15.

[15]   D. Hanke, P. Altmeyer, B. B?hringer, G. Schindler, U. Sch?n and M. L. Klotz, “UV Protection by Textiles,” Chemical Fibers International, Vol. 47, No. 4, 1997, pp. 130-131.

[16]   A. L. N. Da Silva, M. C. G. Rocha, M. A. R. Moraes, C. A. R. Valente and F. M. B. Coutinho, “Mechanical and Rheological Properties of Composites based on Polyolefin and Mineral Additives,” Polymer Testing, Vol. 21, No. 1, 2002, pp. 57-60.

[17]   P. McGenity, J. Hooper, C. Payhter, A. Riley, C. Nutbeem, N. Elton and J. Adams, “Nucleation and Crystallization of PP by Mineral Fillers: Relationship to Impact Strength,” Polymer, Vol. 33, No. 24, 1992, pp. 5215- 5224.

[18]   B. Shentu, J. Li and Z. Weng, “Effect of Oleic Acid- Modified Nano-CaCO3 on the Crystallization Behaviour and Mechanical Properties of Polypropylene,” Chinese Journal of Chemical Engineering, Vol. 14, No. 6, 2006, pp. 814-818.

[19]   A. Ujhelyiová, M. Dulíková, E. Borsig, P. Alexy, O. Brejka and A. Marcin?in, “Measurement Modification of Barrier Properties against UV Irradiation of PP Composite Fibres,” International Polymer Processing, Vol. 27, No. 1, 2012, pp. 98-104.

[20]   A. Marcin?in, E. Kormendy, M. Hricová, A. Rusnák and A. P. Aneja, “Rheological Behavior of Polyester Blend and Mechanical Properties of the Polypropylene-Poly- ester Blend Fibers,” Journal of Applied Polymer Science, Vol. 102, No. 5, 2006, pp. 4222-4227.