Back
 GM  Vol.2 No.2 , April 2012
The Hot Water Oil Expulsion Technique for Geothermal Resources
Abstract: With the rapid development of Chinese petroleum industry, Oil production way of burning crude oil to produce steam need change. Heavy oil reservoir with thin layer or edgewater is unsuitable thermal recovery, electric heating leads to considerable electrical consumption, low injection water temperature decreases reservoir temperature and increased crude oil viscosity. The prolonged temperature difference break up reservoir pore throat cement and framework minerals. To improve high-capacity channel communication, we proposed geothermal oil recovery. Broad-sense abundant geothermal resources and existing injection water technique equipment are used, deep-seated high temperature liquid (oil-gas-water mixture) draws geothermal warming flowing layer to transit heat upward, decreases viscidity and increases fluidity. Reservoir temperature different offer geothermal fountain. Practicability process is analyzed. statistics and reservoir temperature variation analysis of Gudong Oilfield, Shengli Oilfield Company, SINOPEC, we have designed flow-chart concept for geothermal oil recovery, suggested drilling multi-branch well in heavy oil reservoir as injection-well, at the same position of geothermal fountain well, using free-pressure pump to inject hot liquid directly to aimed oil layer, made oil recovery in surrounding wells. It is proposed that geothermal oil recovery forerunner test should be first conducted in favorable blocks.
Cite this paper: X. Wang, "The Hot Water Oil Expulsion Technique for Geothermal Resources," Geomaterials, Vol. 2 No. 2, 2012, pp. 42-48. doi: 10.4236/gm.2012.22007.
References

[1]   Q.-T. Yu, “Proceedings on Oilfield Development,” Petroleum Industry Press, Beijing, 1999, pp. 129-135.

[2]   T.-D. Li, “Main Advances and Achievements in the Spe- cial Subject Study of the 3D Lithospheric Structure of China,” Ge-ology in China, Vol. 33, No. 4, 2006, pp. 689- 699.

[3]   Z.-S. Han, W.-Y. Ran and H.-B. Tong, “Exploration and Evalua-tion of Shallow Geothermal,” Geology in China, Vol. 34, No. 6, 2007, pp. 1115-1122.

[4]   Y.-Z. Tang, W. Qi and S.-W. Liu, “Paleozoic Hydro- thermal Sedimentary Basin and Hydrothermal Sedimen- tary Minerali-zation in the Southern Qinling,” Geology in China, Vol. 34, No. 6, 2007, pp. 1091-1101.

[5]   J. Duo, “The Basic Characteristics of the Yangbajing Geothermal Field—A Typical High Temperature Geo- thermal System,” Acta Geoscientia Sinica, Vol. 34, No. 1, 2001, pp. 10-17.

[6]   X.-Z. Wang and L.-F. Zeng, “Effect of Practical Tech- niques in Producing Remaining Oil in Gudong Oilfield,” Petroleum Exploration and Development, Vol. 35, No. 4, 2008, pp. 467-475.

[7]   K. Yang, Z.-H. Fan and N.-S. Zhu, “Comprehensive Ad- just-ment of Development Mode of Common Swage Re- cycling in Weigang High Pour Point Oil Field,” Petro- leum Exploration and Development, Vol. 29, No. 2, 2002, pp. 94-96.

[8]   S.-Y. Yuan, S.-Y. Liu and Y.-T. Zhang, “Enhancing Heavy Oil Recovery with Hot Water Flooding by Adding Nitro- gen and Surfactant,” Acta Petrolei Sinica, Vol. 25, No. 1, 2004, pp. 57-61.

[9]   H.-M. Zhang, L.-S. Cheng and L. Liang, “The Numerical Si-mulation of Hot Water Flooding with Suffactant in Heavy Oil Reservoir,” Xinjiang Petroleum Geology, Vol. 23, No. 1, 2002, pp. 52-54.

[10]   X.-Z. Wang and J.-Y. Wang, “Study on Feasibility of Geo-thermal Oil Recovery in Gudong Oilfield,” Fault- Block Oil & Gas Field, Vol. 23, No. 1, 2008, pp. 126- 128.

[11]   Y.-C. Wang, J.-J. Zhang and R.-J. Wang, “Numerical Si- mula-tion of the Heating Oil Recovery Process with the Method of the Earth Thermal Energy Self-Balance,” Jour- nal of Beijing Institute of Technology, Vol. 25, No. 1, 2005, pp. 1-5.

[12]   X.-Z. Wang, J.-Y. Wang and C.-F. Wang, “Quantitative De-scription of Characteristics of High-Capacity Channels in Un-consolidated Sandstone Reservoirs Using in Situ Production Data,” Petroleum Science, Vol. 7, No. 1, 2010, pp. 106-111. doi:10.1007/s12182-010-0013-0

 
 
Top