AIT  Vol.2 No.2 , April 2012
Design and Implementation of a Low-Power Active RFID for Container Tracking at 2.4 GHz Frequency
ABSTRACT
In this paper a new active RFID system at 2.45 GHz based on the low-power system-on-chip CC2530 RF transceiver is designed and implemented. Only by using of an integrated multi-channel fast chip, both the MCU and RF operations are done which makes the RFID more reliable and reduces the complexity of the hardware and cost, vividly. This RFID system utilizes the Zig-Bee IEEE 802.15.4 standard in the ISM band. A lot amount of energy is restored by setting Tags in the sleep mode in the most of times. The maximum transmission range of 80 m at the output power of 4.5 dBm is obtained. The main application of this system is for the container identification with precise operation and high accuracy. An active Tag with unique ID is mounted on each vehicle. By enabling the AUTOCRC error detection possibility, minor errors are detected in the received frames. Receiver sensitivity of –97 dBm and current consumption of 1 μA in the sleep mode and 29.6 mA in the active mode are reported.

Cite this paper
D. Moeinfar, H. Shamsi and F. Nafar, "Design and Implementation of a Low-Power Active RFID for Container Tracking at 2.4 GHz Frequency," Advances in Internet of Things, Vol. 2 No. 2, 2012, pp. 13-22. doi: 10.4236/ait.2012.22003.
References
[1]   Z. Min, L. Wenfeng, W. Zhongyun, L. Bin and R. Xia, “A RFID-Based Material Tracking Information System,” 2007 IEEE International Conference on Automation and Logistics, Jinan, 18-21 August 2007, pp. 2922-2926.

[2]   Y. Sun, Y. Zhang and P. Peng, “Design and Realization of 2.45 GHz Active RFID System,” Second International Conference on Intelligent Computation Technology and Automation, Changsha, 11 October 2009, pp. 582-585. doi:10.1109/ICICTA.2009.147

[3]   D. K. Klair, K-W. Chin and R. Raad, “A Survey and Tutorial of RFID Anti-Collision Protocols,” Communications Surveys & Tutorials, Vol. 12, No. 3, 2010, pp. 400-421. doi:10.1109/SURV.2010.031810.00037

[4]   X. Huang, G. Zhang, Q. Sun and D. Qing, “Container Transportation System Using 2.45 GHz Active RFID Technology,” International Conference on Remote Sensing, Environment and Transportation Engineering, Nanjing, 24 June 2011, pp. 3030-3033. doi:10.1109/RSETE.2011.5964953

[5]   W. J. Yoon, S. H. Chung, S. J. Lee and Y. S. Moon, “Design and Implementation of an Active RFID System for Fast Tag Collection,” 7th International Conference on Computer and Information Technology, Fukushima, 16 October 2007, pp. 961-966.

[6]   H. Cho and Y. Baek, “Design and Implementation of an Active RFID System Platform,” International Symposium on Applications and the Internet Workshops, Busan, 23 January 2006, pp. 1-4.

[7]   Texas Instruments, CC2530 User Guide and Datasheet, April 2009. http://www.ti.com

[8]   Y. Hao and Z. Hong, “Development of a Low-Cost Active RFID Platform,” IEEE 2007 International Symposium on Microwave, Antenna, Propagation, and EMC Technologies for Wireless Communications, Hangzhou, 16 August 2007, pp. 152-155.

[9]   Maxim, MAX3232 datasheet, 2007. http://www.maxim.com

[10]   X.-Z. Zheng, X.-H. Cao and W.-L. Zheng, “Design of Electronic Tag in Active RFID Systems,” Port Operation, Vol. 1, No. 2, 2008, pp. 850-853.

[11]   Z. H. Xie and S. L. Lai, “Design and Implementation of an Active RFID MAC Protocol,” International Conference on Wireless Communications, Networking and Mobile Computing, Shanghai, 21 September 2007, pp. 2113-2116.

[12]   H. Cho, H. Choi, W. Lee, Y. Jung and Y. Baek, “LITeTag: Design and Implementation of an RFID System for IT-Based Port Logistics,” Journal of Communications, Vol. 1, No. 4, 2006, pp. 48-57.

[13]   U. Bilstrup and P.-A. Wiberg, “An Architecture Comparison between a Wireless Sensor Network and an Active RFID System,” 29th Annual IEEE International Conference on Local Computer Networks, Tampa, 16 November 2004, pp. 583-584. doi:10.1109/LCN.2004.17

 
 
Top