Back
 ENG  Vol.2 No.5 , May 2010
Comparison Studies on Dynamic Packaging Properties of Corrugated Paperboard Pads
Abstract: Corrugated paperboard is a kind of inexpensive and environmental-friendly packaging material, and may be made into pads of package cushioning to protect products from shock and vibration damage by isolation during distribution. This article deals with the characterization of dynamic packaging properties of corru-gated paperboard pads, such as dynamic cushioning curves, vibration transmissibility and frequency curves. The main feature of article is the evaluation on the dynamic shock cushioning property and vibration trans-missibility of corrugated paperboard pads by a series of experimental studies on the drop shock tester and vibration tester, the establishment of experimental formulas of dynamic cushioning curves, and the analysis of resonance frequencies and vibration transmissibility. By using the fitting polynomial of curve and method of the least mean square, the experimental formulas with third order polynomial function of dynamic cush-ioning curves for corrugated paperboard pads are obtained. By using linear vibration theory with single de-gree of freedom, the resonance frequencies, vibration transmissibility and damping ratios of corrugated pa-perboard pads at different static loads are acquired. All results show the dynamic properties relevant to de-sign applications of corrugated paperboard pads for protective packaging.
Cite this paper: nullY. Guo, W. Xu, Y. Fu and W. Zhang, "Comparison Studies on Dynamic Packaging Properties of Corrugated Paperboard Pads," Engineering, Vol. 2 No. 5, 2010, pp. 378-386. doi: 10.4236/eng.2010.25049.
References

[1]   G. W. Kooistra, V. Deshpande and H. N. G. Wadley, “Hierarchical Corrugated Core Sandwich Panel Concepts,” Journal of Applied Mechanics, Vol. 74, No. 1, 2007, pp. 259-268.

[2]   J. Kirkpatrick and M. Sek, “Replacement of Polymeric Cushioning with Corrugated Fiberboard-Case Study,” Proceedings of 10th IAPRI World Conference on Pack- aging, Melbourne, Australia, 1997, pp. 267-276.

[3]   R. D. Mindlin, “Dynamics of Package Cushioning,” Bell System Technical Journal, Vol. 24, No. 7-10, 1945, pp. 353-461.

[4]   G. S. Mustin, “Theory and Practice of Cushion Design,” The Shock and Vibration Information Center, U.S. Department of Defense, 1968.

[5]   U. S. Department of Defense, “Military Standardization Handbook, Package Cushioning Design (MIL-HDBK- 304B),” 1978.

[6]   E. K. Hahn, A. D. Rudo, B. S. Westerlind and L. A. Carlsson, “Compressive Strength of Edge-Loaded Corrugated Board Panels,” Experimental Mechanics, Vol. 32, No. 3, 1992, pp. 259-265.

[7]   M. H. Lee and J. M. Park, “Flexural Stiffness of Selected Corrugated Structures,” Packaging Technology and Science, Vol. 17, No. 5, 2004, pp. 275-286.

[8]   T. J. Urbanik, “Effect of Corrugated Flute Shape on Fiberboard Edgewise Crush Strength and Bending Stiffness,” Journal of Pulp and Paper Science, Vol. 27, No. 10, 2001, pp. 330-335.

[9]   Y. F. Guo, Y. G. Fu and W. Zhang, “Creep Properties and Recoverability of Double-Wall Corrugated Paperboard,” Experimental Mechanics, Vol. 48, No. 3, 2008, pp. 327-333.

[10]   A. C. Gilchrist, J. C. Suhling and T. J. Urbanik, “Nonlinear Finite Element Modeling of Corrugated Board,” Proceedings of International Conference on Mechanics of Cellulosic Materials, Virginia, USA, 1999, pp. 101-106.

[11]   T. Nordstrand and A. Allansson, “Stability and Collapse of Corrugated Board Panels, Numerical and Experimental Analysis,” Proceedings of 6th International Conference on Sandwich Structures, Florida, USA, 2003, pp. 202-210.

[12]   Z. Aboura, N. Talbi, S. Allaoui and M. L. Benzeggaph, “Elastic Behavior of Corrugated Cardboard: Experiments and Modeling,” Composite Structures, Vol. 63, No. 1, 2004, pp. 53-62.

[13]   H. A. Rami, J. Choi, B. S. Wei, R. Popil and M. Schaepe, “Refined Nonlinear Finite Element Models for Corrugated Fiberboards,” Composite Structures, Vol. 87, No. 4, 2009, pp. 321-333.

[14]   N. Talbi, A. Batti, R. Ayad and Y. Q. Guo, “An Analytical Homogenization Model for Finite Element Modeling of Corrugated Cardboard,” Composite Structures, Vol. 88, No. 2, 2009, pp. 280-289.

[15]   M. Sek and J. Kirkpatrick, “Characteristics of Corrugated Fiberboard as a Cushioning Material in Protective Packa- ging,” Proceedings of 10th IAPRI World Conference on Packaging, Melbourne, Australia, 1997, pp. 257-266.

[16]   M. Sek and J. Kirkpatrick, “Prediction of the Cushioning Properties of Corrugated Fiberboard from Static and Quasidynamic Compression Data,” Packaging Technology and Science, Vol. 10, No. 2, 1997, pp. 87-94.

[17]   G. Burgess, “Generation of Cushion Curves from One Shock Pulse,” Packaging Technology and Science, Vol. 7, No. 2, 1994, pp. 169-173.

[18]   Y. F. Guo and J. H. Zhang, “Shock Absorbing Characteristics and Vibration Transmissibility of Honeycomb Pa perboard,” Shock and Vibration, Vol. 11, No. 5-6, 2004, pp. 521-531.

 
 
Top