OJMetal  Vol.2 No.1 , March 2012
Cobalt Recovery from Waste Catalysts (Petroleum Refining Industry from Gujarat)
ABSTRACT
A hydrometallurgical process has been developed for cobalt recovery from a waste catalyst (petroleum refining industry). This waste catalyst containing about 2.18 weight % of Co, is highly contaminated by Mg, Al, Si, Ca, Fe, Ni, Cu, Zn, Mo. The major steps are: (I) The spent catalyst is roasted with flux material in an electrical furnace at very high temperature (700?C) for a specific duration. (II) The roasted sample is leached with sulphuric acid to bring the metal contents into solution form. (III) For separating cobalt values from the leach solution, the solution pH is raised by NaOH addition, where all cobalt content is precipitated at a pH of about 12. (IV) This cobalt hydroxide precipitate is filtered and dissolved in minimum amount of sulphuric acid to get cobalt sulphate solution which is used as the electrolyte for the electrolytic recovery of cobalt. For optimizing various parameters like (1) H2SO4 concentration; (2) Duration; (3) Cobalt concentration; (4) Current density; (5) Temperature; (6) Stirring etc., The particle surface morphology and deposited layers have been characterized by scanning electron microscopy (SEM). A compact metallic deposit containing 70% cobalt was obtained.

Cite this paper
P. Sivasakthi and N. Sathaiyan, "Cobalt Recovery from Waste Catalysts (Petroleum Refining Industry from Gujarat)," Open Journal of Metal, Vol. 2 No. 1, 2012, pp. 24-30. doi: 10.4236/ojmetal.2012.21004.
References
[1]   N. L. Piret, “Enhancing Cobalt Recovery from Primary and Secondary Resources,” Journal of the Minerals, Metals and Materials Society, Vol. 50, No. 10, 1998, pp. 42-43. doi:10.1007/s11837-998-0351-1

[2]   M. J. Hawkins, “Recovering Cobalt from Primary and Secondary Sources,” Journal of the Minerals, Metals and Materials Society, Vol. 50, No. 10, 1998, pp. 46-50. doi:10.1007/s11837-998-0353-z

[3]   S. J. Wang, “Cobalt—Its Recovery, Recycling and Application,” Journal of the Minerals, Metals and Materials Society, Vol. 58, No. 10, 2006, pp. 47-50. doi:10.1007/s11837-006-0201-y

[4]   P. Searle, “Forecasting the Cobalt Market through 2015,” Journal of the Minerals, Metals and Materials Society, Vol. 50, No. 10, 1998, pp. 42-43. doi:10.1007/s11837-998-0352-0

[5]   S. C. Das and T. Subbaiah, “Electrowinning of Cobalt, Winning from Pure Cobalt Sulphate Bath,” Hydrometallurgy, Vol. 12, No. 3, 1984, pp. 317-333. doi:10.1016/0304-386X(84)90004-5

[6]   A. I. Vogel, “A Text Book of Quantitative Inorganic Ana- lysis Including Elementary Instrumental Analysis,” The English Language Book Society and Longman, London, 1978, pp. 569-573.

[7]   H. A. Flaschka, “EDTA Titrations, an Introduction to Theory and Practice,” Pergamon Press, London, 1964.

[8]   R. P. Das, “Recovering Cobalt from Secondary Sources in India,” Journal of the Minerals, Metals and Materials Society, Vol. 50, No. 10, 1998, pp. 46-50. doi:10.1007/s11837-998-0354-y

[9]   I. M. Valverde Jr., J. F. Paulino and J. C. Afonso “Hydrometallurgical Route to Recover Molybdenum, Nickel, Cobalt and Aluminum from Spent Hydro Treating Catalyst in Sulphuric Acid Medium,” Journal of Hazardous Materials, Vol. 160, No. 2-3, 2008, pp. 310-317. doi:10.1016/j.jhazmat.2008.03.003

[10]   V. S. Bagotzky, “Fundamentals of Electrochemistry,” Plenum Press, New York, 1993, p. 404.

[11]   Elsevier, “Metal Finishing Guidebook and Dictionary,” Elsevier Science Publication, New York, Published Annually.

[12]   A. Brenner, “Electrodeposition of alloys, Principles and Practice,” Academic Press, New York and London, 1963.

[13]   B. B. Kar, B. V. R. Murthy and V. N. Misra, “Extraction of Molybdenum from Spent Catalyst by Salt-Roasting,” International Journal of Mineral Processing, Vol. 76, No. 3, 2005, pp. 143-147. doi:10.1016/j.minpro.2004.08.017

[14]   R. G. Busnardo, N. G. Busnardo, G. N. Salvato and J. C. Afoxiso, “Processing of Spend NiMo and CoMo/Al2O3 Catalysts via Fusion with KHSO4,” Journal of Hazardous Materials, Vol. 139, No. 2, 2007, pp. 391-398.

[15]   C. Kargl-Simard, J. H. Huang and A. M. Alfantazi, “Electrical Conductivity and Density of CoSO4/H2SO4 Solutions in the Range of Modern Cobalt Electrowinning Electrolytes,” Minerals Engineering, Vol. 16, No. 6, 2003, pp. 529- 535. doi:10.1016/S0892-6875(03)00059-1

[16]   W. J. Basirun, W. J. Basirun and Y. Alias, “Influence of Magnetic Field of the Electro Deposition of Ni-Co Alloy,” Journal of Chemical Sciences, Vol. 122, No. 2, 2010, pp. 279-285. doi:10.1007/s12039-010-0032-9

 
 
Top