WJNSE  Vol.2 No.1 , March 2012
Morphology and Optical Measurements of Nanostructured In2O3:SnO2 Nanoparticle
ABSTRACT
Ultra-fine and uniform ITO nanopowders can be prepared by very simple Combustion method. In this paper, effects of Indium oxide with Sn doping on crystallinity, band gap values by UV studies and morphological studies by SEM and TEM analysis of nanopowders are reported. Powder mixtures of In2O3:SnO2 of 90:10 compositions are prepared and calculated grain size from X-ray diffraction measurements. The free electron absorption is determined from spectral transmission and reflection measurements. Key words: In2O3:SnO2, XRD, UV, Combustion and SEM.

Cite this paper
A. Ayeshamariam, M. Jayachandran, C. Sanjeeviraja and M. Begam, "Morphology and Optical Measurements of Nanostructured In2O3:SnO2 Nanoparticle," World Journal of Nano Science and Engineering, Vol. 2 No. 1, 2012, pp. 6-12. doi: 10.4236/wjnse.2012.21002.
References
[1]   G. Franck and H. Kostlin, “Electrical Properties and Defect Model of Tin-Doped Indium Oxide Layers,” Applied Physics A: Materials Science & Processing, Vol. 27, No. 4, 1982, pp. 197-206. doi:10.1007/BF00619080

[2]   C. G. Fonstad and R. H. Rediker, “Electrical Properties of High-Quality Stannic Oxide Crystals,” Journal of Applied Physics, Vol. 42, No. 7, 1971, p. 2911. doi:10.1063/1.1660648

[3]   X. Wang, S. S. Yee and W. P. Carey, “Transition between Neck-Controlled and Grain-Boundary-Controlled Sensitivity of Metal-Oxide Gas Sensors,” Sensors and Actuators B: Chemical, Vol. 25, No. 1-3, 1995, pp. 454-457. doi:10.1016/0925-4005(94)01395-0

[4]   L. Abello, B. Bochu, A. Gaskov, S. Koudryavtseva, G. Lucazeau and M. Roumyantseva, “Structural Characterization of Nanocrystalline SnO2 by X-Ray and Raman Spectroscopy,” Journal of Solid State Chemistry, Vol. 135, No. 1, 1998, pp. 78-85. doi:10.1006/jssc.1997.7596

[5]   J. H. Kang, J. Y. Kim and D. Y. Jeona, “Synthesis and Characterization of Orange Emitting SnO2: Eu3+ Phosphor by an Optimized Combustion Method,” Journal of the Electrochemical Society, Vol. 152, No. 3, pp. H33-H38.

[6]   L. E. Shea, J. Mukittrick and O. A. Lopez “Synthesis of Red-Emitting, Small Particle Size Luminescent Oxides Using an Optimized Combustion Process,” Journal of the American Ceramic Society, Vol. 79, No. 12, 1996, pp. 3257-3265. doi:10.1111/j.1151-2916.1996.tb08103.x

[7]   S. R. Jain, K. C. Adiga and V. R. P. Verneker, “A New Approach to Thermochemical Calculations of Condensed Fuel-Oxidizer Mixtures,” Combustion and Flame, Vol. 40, 1981, pp. 71-79. doi:10.1016/0010-2180(81)90111-5

[8]   A. S. Mukasyan, C. Costllo, K. P. Sherlock, D. Lafarga and A. Varma, “Perovskite Membranes by Aqueous Combustion Synthesis: Synthesis and Properties,” Separation and Purification Technology, Vol. 25, No. 1-3, 2001, pp. 117-126. doi:10.1016/S1383-5866(01)00096-X

[9]   J. H. Kang, J. Y. Kim and D. Y. Jean, Proceeding of the 3rd International Meeting on information display, Daegu, 2002.

[10]   H. Wulff and C. Eggs, “Investigation of Stored Energy in Plasma Deposited TiNx Films,” Journal of Vacuum Science & Technology A, Vol. 15, No. 6, 1997, p. 2938. doi:10.1116/1.580888

[11]   A. R. Stokes, “A Numerical Fourier-Analysis Method for the Correction of Widths and Shapes of Lines on X-ray Powder Photographs,” Proceedings of the Physical Society, Vol. 6, No. 4, 1948, p. 382. doi:10.1088/0959-5309/61/4/311

[12]   Y. Ohhata, F. Shinoki and S. Yoshida, “Optical Properties of r.f. Reactive Sputtered Tin-Doped In2O3 Films,” Thin Solid Films, Vol. 59, No. 2, 1979, pp. 255-261. doi:10.1016/0040-6090(79)90298-0

[13]   J. Tauc, R. Grigorovici and A. Vancu, “Optical Properties and Electronic Structure of Amorphous Germanium,” Physica Status Solidi (b), Vol. 15, No. 2, 1966, pp. 627-637. doi:10.1002/pssb.19660150224

[14]   J. Tauc, “Amorphous and Liquid Semiconductors,” In: J. Tauc, Ed., Plenum, New York, 1979.

[15]   A. Gurlo, N. Barsan, U. Weimar, M. Ivanovskaya, A. Taurino and P. Siciliano, “Polycrystalline Well-Shaped Blocks of Indium Oxide Obtained by the Sol-Gel Method and Their Gas-Sensing Properties,” Chemistry of Materials, Vol. 15, No. 23, 2003, pp. 4377-4383. doi:10.1021/cm031114n

[16]   P. S. Devi, M. Chatterjee and D. Ganguli, “Indium Tin Oxide Nano-Particles through an Emulsion Technique,” Material Letters, Vol. 55, No. 4, 2002, pp. 205-210. doi:10.1016/S0167-577X(01)00647-4

[17]   S. Ramanan, “Dip coated ITO Thin-Films through Sol-Gel Process Using Metal Salts,” Thin Solid Films, Vol. 389, No. 1-2, 2001, pp. 207-212. doi:10.1016/S0040-6090(01)00825-2

[18]   H. Y. Xu, X. L. Liu, D. L. Cui, M. Li and M. H. Jiang, “A Novel Method for Improving the Performance of ZnO Gas Sensors,” Sensors and Actuators B: Chemical, Vol. 114, No. 1, 2006, pp. 301-307. doi:10.1016/j.snb.2005.05.020

 
 
Top