Back
 ENG  Vol.4 No.2 , February 2012
Stress Concentrations for Slotted Plates in Bi-Axial Stress
Abstract: The photo-elastic method has been employed to determine stress concentration factor (SCF) for square plates containing holes and inclined slots when the plate edges are subjected to in-plane tension combined with compression. Analyses given of the isochromatic fringe pattern surrounding the hole provides the SCF conveniently. The model material is calibrated from the known solution to the stress raiser arising from a small circular hole in a plate placed under biaxial tension-compression. These results also compare well with a plane stress FE analysis. Consequently, photo-elasticity has enabled SCF’s to be determined experimentally for a biaxial stress ratio, nominally equal to –4, in plates containing a long, thin slot arranged to be in alignment with each stress axis. The two, principal stresses lying along axes of symmetry in the region surrounding the notch are separated within each isochromatic fringe by the Kuske method [1]. FE provides a comparable full-field view in which contours of maximum shear stress may be identified with the isochromatic fringe pattern directly. The principal stress distributions referred to the plate axes show their maximum concentrations at the notch boundary. Here up to a fourfold magnification occurs in the greater of the two nominal stresses under loads applied to the plate edges. Thus, it is of importance to establish the manner in which the tangential stress is distributed around the slot boundary. Conveniently, it is shown how this distribution is also revealed from an isochro-matic fringe pattern, within which lie the points of maximum tension and maximum compression.
Cite this paper: D. Rees and B. Taylor, "Stress Concentrations for Slotted Plates in Bi-Axial Stress," Engineering, Vol. 4 No. 2, 2012, pp. 69-75. doi: 10.4236/eng.2012.42009.
References

[1]   A. Kuske, “Photoelastic Stress Analysis,” Wiley, Hoboken, 1974.

[2]   H. Neuber, “Theory of Notch Stresses,” J. W. Edwards, Ann Arbor, 1946.

[3]   W. D. Pilkey and R. E. Peterson, “Stress Concentration Factors,” 2nd Edition, Wiley, Hoboken, 1997. doi:10.1002/9780470172674

[4]   H. Bahai, “A Parametric Model for Axial and Bending Stress Concentration Factor within API Drill-String Threaded Connectors,” International Journal of Press Vessel and Piping, Vol. 78, No. 7, 2001, pp. 495-505. doi:10.1016/S0308-0161(01)00060-6

[5]   D. Tranxuan, “Optimum Fillet Radius for a Latch”, Computers and Structures, Vol. 46, 1996, pp. 645-650. doi:10.1016/0045-7949(96)00042-9

[6]   L. Susmel and D. Taylor, “Fatigue Design in the Presence of Stress Concentrations,” Journal Strain Analysis for Engineering Design, Vol. 38, No. 5, 2003, pp. 443-452. doi:10.1243/03093240360713496

[7]   ESDU 85045, Stress Concentrations: Interaction and Stress Decay for Selected Cases, London, 1985.

[8]   K. Linda and T. Uemura, “Stress Concentration Factor Formulae Widely Used in Japan,” Fatigue and Fracture of Engineering Materials and Structures, Vol. 19, No. 6, 1996.

[9]   N. T. Younis, “Assembly Stress for the Reduction of Stress Concentrations,” Mechanical Research Communications, Vol. 33, No. 6, 2006, pp. 837-845. doi:10.1016/j.mechrescom.2006.03.007

[10]   R. Ortega, H. Sbuttoni, L. Boccanera, E. Passquali and G. Viau, “Stress Concentration Effect on Industrial Components,” Journal of Failure Analysis and Prevention, Vol. 10, No. 6, 2010, pp. 508-514. doi:10.1007/s11668-010-9380-5

[11]   R. Lovic, S. M. Tipton and J. R. Sorem, “Multi-Axial Stress Concentrations in Filleted Shafts,” Journal of Machine Design, Vol. 123, No. 2, 2001, pp. 300-303.

[12]   C. Walenta, “Finding Stress Concentrations in Brackets,” Machine Design, Vol. 66, No. 23, 1994, pp. 128-135.

[13]   R. B. Heywood, “Designing by Photoelasticity,” Chapman and Hall, London, 1952.

[14]   G. S. Hollister, “Ex-perimental Stress Analysis—Principles and Methods,” Cam-bridge University Press, Cambridge, 1967.

[15]   A. W. Hendry, “Photoelastic Analysis,” Pergamon, Berlin, 1966.

[16]   S. Tay-lor, “Photoelastic Examination of Stress Concentration,” Pro-ject Report, Brunel University, Brunel, 1999.

[17]   D. W. A. Rees, “Mechanics of Solids and Structures,” Imperial College Press, World Scientific, 2000.

[18]   ABAQUS Standard 5.8 User Manual, HKS Inc., Dallas, 1998.

[19]   M. Mohammadi, J. R. Dryden and L. Y. Jiang, “Stress Concentrations around a Hole in a Radially Inhomogenous Plate,” International Journal of Solids and Structures, Vol. 48, No. 3-4, 2011, pp. 483-491. doi:10.1016/j.ijsolstr.2010.10.013

[20]   J. Rezaeepazhand and M. Jafari, “Stress Concentrations in Metallic Plates with Special Shaped Cut-Outs,” International Journal of Mechanical Sciences, Vol. 52, No. 1, 2010, pp. 96-102. doi:10.1016/j.ijmecsci.2009.10.013

[21]   T. Comlekei, D. Mackenzie, R. Hamilton and J. Woods, “Stress Concentrations at Radial Cress-Bores in Pressurised Thick Cylinders,” Journal of Strain Analysis for Engineering Design, Vol. 42, No. 6, 2007, pp. 461-468. doi:10.1243/03093247JSA251

[22]   Kalenovic, Z. “Investigation of Stress Concentrations in Cylindrical Shells with Polygonal Holes,” Strojarstvo, Vol. 45, No. 1-3, 2003, pp. 25-33.

[23]   E. A. Badr, “Stress Concentration Factors for Pressurised Elliptic Cross-Sections in Blocks,” International Journal of Press Vessel and Piping, Vol. 83, No. 6, 2006, pp. 442- 446. doi:10.1016/j.ijpvp.2006.01.003

[24]   N. L. Pederson, “Stress Concentrations in Keyways and Optimisation of Key-way Design,” Journal of Strain Analysis for Engineering Design, Vol. 45, No. 8, 2010, pp. 593-604.

[25]   A. Bhargava and K. N. Shivakumar, “Three-Dimensional Tensile Stress Concentrations in Countersunk Rivet Holes,” Aeronautical Journal, Vol. 111, No. 1126, 2007, pp. 777- 786.

[26]   S. Timoshenko and J. N. Goodier, “Theory of Elasticity,” McGraw-Hill, Boston, 1970.

 
 
Top