Catalina Bosch Ojeda, Fuensanta Sánchez Rojas^*, José Manuel Cano Pavón

Show more
Department of Analytical Chemistry, Faculty of Sciences, University of Málaga, Málaga, Spain.
Show less

Abstract: A new method for the determination of cobalt was developed by dispersive liquid-liquid microextraction preconcentra-tion and flame atomic absorption spectrometry. In the proposed approach, 1,5-bis(di-2-pyridyl) methylene thiocarbohydrazide (DPTH) was used as a chelating agent, and chloroform and ethanol were selected as extraction and dispersive solvents. Some factors influencing the extraction efficiency of cobalt and its subsequent determination, including extraction and dispersive solvent type and volume, pH of sample solution, concentration of the chelating agent, and extraction time, were studied and optimized. Under the optimum conditions, a preconcentration factor of 8 was reached. The detection limit for cobalt was 12.4 ng?mL–1, and the relative standard deviation (RSD) was 3.42% (n = 7, c = 100 ng?mL–1). The method was successfully applied to the determination of cobalt in food, environmental and water samples.

Keywords: Cobalt; Dispersive Liquid-Liquid Microextraction; Flame Atomic Absorption Spectrometry; Water; Environmental and Food Samples

Cite this paper: C. Ojeda, F. Rojas and J. Pavón, "Determination of Cobalt in Food, Environmental and Water Samples with Preconcentration by Dispersive Liquid-Liquid Microextraction," American Journal of Analytical Chemistry, Vol. 3 No. 2, 2012, pp. 125-130. doi: 10.4236/ajac.2012.32018.

References

[1]   H. A. Mckenzie and L. E. Smythe, “Quantitative Trace Analysis of Biological Materials,” Elsevier, Amsterdam, 1998.

[2]   G. F. Nordberg, B. A. Fowler, M. Nordberg and L. T. Friberg (Eds.), “Handbook on the Toxicology of Metals,” Elsevier Inc., Amsterdam, 2007.

[3]   Agency for Toxic Substances and Disease Registry (ATSDR), “Toxicological Profile for Cobalt,” US Depart- ment of Health and Human Services, Public Health Ser- vice Atlanta, GA, 2004.

[4]   M. M. M. El-Defrawy, J. Posta and M. T. Beck, “Elimination of the Interfering Effects of Ligands in the Determination of Cobalt by Atomic Absorption Spectrometry,” Analytica Chimica Acta, Vol. 115, 1980, pp. 155-161. doi:10.1016/S0003-2670(01)93153-8

[5]   A. S. Ribeiro, M. A. Vieira, A. F. Silva, D. L. G. Borges, B. Welz, U. Heitmann and A. J. Curtius, “Determination of Cobalt in Biological Samples by Line-source and High-resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry Using Solid Sampling or Alkaline Treatment,” Spectrochimica Acta B, Vol. 60, No. 5, 2005, pp. 693-698. doi:10.1016/j.sab.2005.01.002

[6]   H. Ciftci, A. Ozkaya and E. Kariptas, “Determination of Fatty Acids, Vitamins and Trace Elements in Pistacia terebinthus Coffee,” Journal of Food Agriculture Environment, Vol. 7, No. 3-4, 2009, pp. 72-74.

[7]   S. Z. Mohammadi, D. Afzali, Y.M. Baghelani and L. Karimzadeh, “Ultrasound-Assisted Emulsification Microextraction of Trace Amounts of Co and Mn Ions Prior to Flame Atomic Absorption Spectrometry,” Journal Brazilian Chemical Society, Vol. 22, No. 1, 2011, pp. 104-110. doi:10.1590/S0103-50532011000100014

[8]   P. X. Baliza, L. S. G. Teixeira and V. A. Lemos, “A Procedure for Determina-tion of Cobalt in Water Samples after Dispersive Liquid-Liquid Microextraction,” Microchemical Journal, Vol. 93, No. 2, 2009, pp. 220-224. doi:10.1016/j.microc.2009.07.009

[9]   S. R. Yousefi and S. J. Ahmadi, “Development a Robust Ionic Liquid-Based Dispersive Liquid-Liquid Microex- traction against High Concentration of Salt Combined with Flame Atomic Absorption Spectrometry using Mi- crosample Introduction System for Preconcentration and Determination of Cobalt in Water and Saline Samples,” Microchimica Acta, Vol. 172, 2011, pp. 75-82. doi:10.1007/s00604-010-0406-1

[10]   G. L. Donati, C. C. Nas-centes, A. R. A. Nogueira, M. A. Z. Arruda and J. A. Nóbrega, “Acid Extraction and Cloud Point Preconcentration as Sample Preparation Strategies for Cobalt Determination in Biological Materials by Thermos- pray Flame Furnace Atomic Absorption Spectrometry,” Microchemical Journal, Vol. 82, No. 2, 2006, pp. 189-195. doi:10.1016/j.microc.2006.01.006

[11]   M. Gharehbaghi, F. Shemirani and M. Baghdadi, “Dis- persive Liquid-Liquid Mi-croextraction and Spectropho- tometric Determination of Cobalt in Water Samples,” In- ternational Journal Environmental Analytical Chemistry, Vol. 88, No. 7, 2008, pp. 513-523.

[12]   M. Gharehbaghi, F. Shemirani and M. D. Fara-hani, “Dispersive Liquid-Liquid Microextraction and Spectro-photometric Determination of Cobalt in Water Samples Cold- Induced Aggregation Microextraction Based on Ionic Liquids and Fiber Optic-Linear Array Detection Spectrophotometry of Cobalt in Water Samples,” Journal Hazardous Material, Vol. 165, No. 1-3, 2009, pp. 1049-1055. doi:10.1016/j.jhazmat.2008.10.128

[13]   H. Ciftci, “Solid Phase Extraction method for the Deter- mination of Cobalt in Water Samples on Duolite XAD- 761 Resin Using 4-(2-pyridylazo) Resorcinol by FAAS,” Current Analytical Chemistry, Vol. 6, No. 2, 2010, pp. 154-160. doi:10.2174/157341110790945472

[14]   R. Saavedra, C. Soto, J. Ya?ez and M. I. Toral, “Deter- mination of Cobalt in Water Samples by Photoacoustic Spectroscopy with a Solid-Phase Spectrophotometry Approach using 3-(2-pyridyl)-5,6-bis (4-sulfophenyl)-1,2, 4-triazine,” Microchemical Journal, Vol. 98, 2011, pp. 220-224. doi:10.1016/j.microc.2011.02.003

[15]   N. Tajodini and A. Moghimi, “Preconcentration and Det- ermination of Ultra Trace Cobalt(II) in Water Samples using Co(II)-Imprinted Diazoam Inobenzene-Vinilpyr- idine Copolymers,” Asian Journal Chemistry, Vol. 22, 2010, pp. 3335-3344.

[16]   H. Ciftci, “Separation and preconcentration of Cobalt using a New Shiff Base Derivative on Amberlite XAD-7,” Clean-Soil, Air, Water, Vol. 38, 2010, pp. 657- 662.

[17]   H. Abdolmohammad-Zadeh and E. Ebrahimzadeh, “De- termination of Cobalt in Water Samples by Atomic Ab- sorption Spectrometry after Pre-Concentration with a Simple Ionic Liquid-Based Dispersive Liquid-Liquid Micro-Extraction Methodology,” Central European Journal Chemistry, Vol. 8, No. 3, 2010, pp. 617-625. doi:10.2478/s11532-010-0030-2

[18]   R. A. Gil, J. A. Gásquez, R. Olsina, L. D. Martinez and S. Cerutti, “Cloud Point Extraction for Cobalt Preconcentra- tion with on-Line Phase Separation in a Knotted Reactor Followed by ETAAS Determination in Drinking Waters,” Talanta, Vol. 76, No. 3, 2008, pp. 669-673. doi:10.1016/j.talanta.2008.04.004

[19]   N. Baghban, A. M. H. Shabani, S. Dadfarnia and A. A. Jafari, “Flame Atomic Ab-sorption Spectrometric Deter- mination of Trace Amounts of Cobalt after Cloud Point Extraction as 2-[(2-Mercaptophenylimino)methyl]phenol Complex,” Journal Brazilian Chemistry Society, Vol. 20, No. 5, 2009, pp. 832-838. doi:10.1590/S0103-50532009000500005

[20]   C. B. Ojeda and F.S. Rojas, “Separation and Preconcen- tration by Dispersive Liquid-Liquid Microextraction Procedure: A Review,” Chromatographia, Vol. 69, 2009, pp. 1149-1159. doi:10.1365/s10337-009-1104-1

[21]   C.B. Ojeda and F.S. Rojas, “Separation and Preconcen- tration by Dispersive Liquid-Liquid Microextraction Procedure: Recent Applications,” Chromatographia, Vol. 74, No. 9-10, 2011, pp. 651-679. doi:10.1007/s10337-011-2124-1

[22]   J. Bonilla Abascal, A. Garcia de Torres and J.M. Cano Pavon, “Analytical Properties of 2,2’-Bis(di-2-pyridinyl- methylene) thiocarbohydrazone,” Micro-chemical Journal, Vol. 28, 1983, pp. 132-136. doi:10.1016/0026-265X(83)90038-3

[23]   E. M. Martinis, R. A. Olsina, J. C. Altamirano and R. G. Wuilloud, “Sensitive Determination of Cadmium in Water Samples by Room Temperature Ionic Liquid-Based Preconcentration and Electrothermal Atomic Absorption Spectrometry,” Analytica Chimica Acta, Vol. 628, No. 1, 2008, pp. 41-48. doi:10.1016/j.aca.2008.09.001