ENG  Vol.4 No.1 , January 2012
Computational Analysis of Flow Field on the Propulsion Nozzle of a Micro-Turbojet Engine
Abstract
The purpose of this paper is to analyze the flow field on the propulsion nozzle of a micro-turbojet engine in function of the velocity. The 2D axisymmetric numerical simulation was made by using commercial software FLUENT?. A micro-turbojet engine was also employed for this study and it has the following characteristics: 100 N thrust, 130,000 rpm, mass flow rate 0.2650 kg/s, weight 1.2 kg. This engine is operating in Mexico city under the following conditions: P0, 78,000 Pa T0, 300 K, πc, 2.1 and a turbine entry temperature of 1000 K; it is considered that the nozzle is not choked. For this study, the viscous standard k- model, a semi-empirical model based on transport model equations for the turbulent kinetic energy (k) and its dissipation rate, is used. The transport model equation for k is derived from the ex-act equation, while the transport model equation for is obtained by using physical reasoning and bears resemblance to its mathematically exact counterpart. The employed grids are structured and the boundary conditions are obtained from a thermodynamic analysis. The results that are obtained show an increment of the velocity of 6.25% to the exit propulsion nozzle.

Cite this paper
J. Garrido-Téllez, M. Toledo-Velázquez, S. Alcántara-Montes, J. Ortega-Herrera and A. Reyes-León, "Computational Analysis of Flow Field on the Propulsion Nozzle of a Micro-Turbojet Engine," Engineering, Vol. 4 No. 1, 2012, pp. 1-5. doi: 10.4236/eng.2012.41001.
References

[1]   D. J. Mattingly, “Elements of Gas Turbine Propulsion,” McGraw-Hill, Inc., New York, 1996.

[2]   M. P. Boyce, “Gas Turbine Engineering Handbook,” Gulf Publishing Company, Houston, 1982.

[3]   T. J. Chung, “Computational Fluid Dy-namics,” Cambridge University Press, Cambridge, 2002.

[4]   J. M. Steven and A. W. Kenrick, “Computational Analyses of Propulsion Aeroacoustics for Mixed Flow Nozzle Pylon Installation at Takeoff,” NASA/C-2001-211056, September 2001. http://aeroelasticity.larc.nasa.gov/wp-content/uploads/2010/08/NASA-CR-2001-211056.pdf

[5]   R. H. Thomas, K. S. Kinzie and S. P. Pao, “Computational Analysis of a Pylon-Chevron Core Nozzle Interaction,” AIAA Paper 2001-2185, 2001.

[6]   D. C. Kenzakowski, J. Shipman and S. M. Dash, “Turbulence Model Study of Laboratory Jets with Mixing En-hancements for Noise Reduction,” AIAA Paper 200-0219-2002.

[7]   B. E. Launder and D. B. Spalding, “Lectures in Mathematical Models of Turbulence,” Academic Press, London, 1972.

[8]   S. Sarkar and L. Balakrishnan, “Applica-tion of a Reynolds-Stress Turbulence Model to the Compressi-ble Shear Layer,” ICASE Report 90-18, NASA CR 182002, 1990.

[9]   L. L. Baxter, “Turbulent Transport of Particles,” PhD Thesis, Brigham Young University, Provo, 1989.

[10]   A. Brandt, “Multi-Level Adaptive Computations in Fluid Dynam-ics,” Technical Report AIAA-79-1455, AIAA, Williamsburg, 1979.

[11]   J. L. Ferzieger and M. Peric, “Computational Meth-ods for Fluid Dynamics,” Springer-Verlag, Heidelberg, 1996.

[12]   B. Stephen, “Pope Turbulent Flows,” Cambridge University Press, Cambridge, 2000.

 
 
Top