USGS Cement Statistics, http://minerals.usgs.gov/ds/2005/140/cement.pdf
 W. T. Choate, “Energy and Emission Reduction Opportunities for the Cement Industry,” Prepared under Contract for: Industrial Technologies Program, US DOE Energy Efficiency and Renewable Energy, 29 December 2003.
 M. Taylor, C. Tam and D. Gielen “Energy Efficiency and CO2 Emissions from the Global Cement Industry,” Energy Efficiency and CO2 Emission Reduction Potentials and Policies in the Cement Industry, IEA, Paris, 4-5 September 2006.
 N. T. Zheng, and G. David, “How Can China Lighten up? Urbanization, Industrialization and Energy Demand Scenarios,” U.S. Department of Energy under Contract No. DE-AC02-05CH11231, Lawrence Berkeley National Laboratory, LBNL Paper LBNL-3527E, July 2009.
 C. A. Hendriks, E. Worrell, D. DeJager, K Block and P. Riemer, “Emission Reduction of Greenhouse Gases from the Cement Industry,” IEA Greenhouse gas R&D Programme, 2000. http://www.ieagreen.org.uk/prghgt42.htm
 Z. G. Yuan and H. Liu, “Soft Sensor for Apparent Degree of Calcination in NSP Cement Production Line,” The 2nd International Conference on Computer and Automation Engineering (ICCAE), Singapore City, 26-28 February 2010 pp. 473-478.
 A. Hasanbeigi, L. Price, H. Lu and L. Wang, “Analysis of Energy-Efficiency Opportunities for the Cement Industry in Shandong Province, China: A Case Study of 16 Cement Plants,” Energy, Vol. 35, 2010, pp. 3461-3473. doi:10.1016/j.energy.2010.04.046
 Q. Yan, C. Zhou, P. Qu and R. Zhang, “The Promotion of Clean Development Mechanism to Cement Industry Capturing Waste Heat for Power Generation in China,” Mitigation Adapt Strategy Global Change, Vol. 14, No. 8, 2009, pp. 793-804. doi:10.1007/s11027-009-9199-0
 J. Wang, Y. Dai and L. Gao, “Energy Analyses and Parametric Optimizations for Different Cogeneration Power Plants in Cement Industry,” Applied Energy, Vol. 86, No. 6, 2009, pp. 941-948. doi:10.1016/j.apenergy.2008.09.001
 M. D. Mirolli “Cementing Kalina Effectiveness,” IEEE Industry Applications Magazine, July-August 2006. www.ieee.org/ias
 E. Worrell, L. Price, N. Martin, C. Hendriks and O. L. Meida, “Carbon Dioxide Emissions from the Global Cement Idustry,” Annual Review Energy Environment, Vol. 26, 2001, pp. 303-329. doi:10.1146/annurev.energy.26.1.303
 J. Marion, N. Nsakala, T. Griffin and A. Bill, “Controlling Power Plant CO2 Emissions: A Long Range View,” 1st National Conference on Carbon Sequestration, National Energy and Technology Laboratory, 14-17 May 2001.
 C. Alie, L. Backham, E. Croiset and P. L. Douglas, “Simulation of CO2 Capture Using MEA Scrubbing: A Flowsheet Decomposition Method,” Energy Conversion and Management, Vol. 46, No. 3, 2005, pp 475-487. doi:10.1016/j.enconman.2004.03.003
 M. T. Ho, G. W. Allinson and D. E. Wiley, “Comparison of MEA Capture Cost for Low CO2 Emissions Sources in Australia,” International Journal of Greenhouse Gas Control, Vol. 5, No. 1, 2010, pp. 49-60. doi:10.1016/j.ijggc.2010.06.004
 R. Bounaceur, N. Lape, D. Roizard, C. Vallieres and E. Favre, “Membrane Processes for Post-Combustion Carbon Dioxide Capture: A Parametric Study,” Energy, Vol. 31, No. 14, 2006, pp. 2556-2570. doi:10.1016/j.energy.2005.10.038
 M. C. Trachtenberg, R. M. Cowan, D. A. Smith, D. A. Horazak, M. D. Jensen, J. D. Laumb, A. P. Vucelic, H. Chen, L. Wang and X. Wu, “Membrane-Based, Enzyme-Facilitated, Efficient Carbon Dioxide Capture,” Energy Procedia, Vol. 1, 2009, pp. 353-360. doi:10.1016/j.egypro.2009.01.048
 V. Manovic and E. J. Anthony, “Lime-Based Sorbents for High-Temperature CO2 Capture—A Review of Sorbent Modification Methods,” International Journal of Environmental Research and Public Health, Vol. 7, No. 8, 2010, pp. 3129-3140. doi:10.3390/ijerph7083129
 P. W. Gao, X. L. Lu, H. Lin, X. Li and J. Hou, “Effects of Fly Ash on the Properties of Environmentally Friendly Dam Concrete,” Fuel, Vol. 86, No. 7-8, 2007, pp. 1208-1211. doi:10.1016/j.fuel.2006.09.032
 S. Wang and L. Baxter “Comprehensive Study of Biomass Fly Ash in Concrete: Strength, Microscopy, Kinetics and Durability,” Fuel Processing Technology, Vol. 88, No. 11-12, 2007, pp. 1165-1170. doi:10.1016/j.fuproc.2007.06.016
 S. Wang, A. Miller, E. Llamazos, F. Fonseca and L Baxter, “Biomass Fly Ash in Concrete: Mixture Proportioning and Mechanical Properties,” Fuel, Vol. 87, No. 3, 2008, pp. 365-371. doi:10.1016/j.fuel.2007.05.026
 S. Wang, E. Llamazos, L. Baxter and F. Fonseca, “Durability of Biomass Fly Ash Concrete: Freezing and Thawing and Rapid Chloride Permeability Tests,” Fuel, Vol. 87, No. 3, 2008, pp. 359-364. doi:10.1016/j.fuel.2007.05.027
 S. Wang and L. Baxter, “Biomass Ash in Concrete-Mitigation of Alkali Silica Reactions (ASRs) Expansions with Different Opal Percentages,” Key Engineering Materials, Vol. 400-402, 2009, pp. 131-136. doi:10.4028/www.scientific.net/KEM.400-402.131
 A. Johnson, J. J. Catalan and S. D. Kinrade, “Characterization and Evaluation of Fly-Ash from Co-Combustion of Lignite and Wood Pellets for Use as Cement Admixture,” Fuel, Vol. 89, No. 10, 2010, pp. 3042-3050. doi:10.1016/j.fuel.2010.05.027