M. Kamal and E. S. Gouda, “Effect of rapid solidification on structure and properties of some lead-free solder alloy,” Materials and Manufacturing Processes, Vol. 21, pp. 736-740, 2006.
E. S. Gouda, E. Ahmed and F. Saad Allah, “Electrical and mechanical properties of Sn-5wt.%Sb alloy with annealing temperature,” European Physical Journal: Applied Physics, Vol. 45, pp. 10901-10905, 2009.
E. S. Gouda, “Effect of cooling rate on structure and creep behavior of Sn-0.7 Cu-0.5 Zn lead-free solder alloy,” European Physical Journal: Applied Physics, Vol. 48, pp. 20902-20906, 2009.
R. Islam, B. Wu, M. Alam, Y. Chan and W. Jillek, “Investigations on microhardness of Sn-Zn based lead-free solder alloys as replacement of Sn-Pb solder,” Alloys and Compounds, Vol. 392, pp. 149-158, 2005.
M. Kamal, M. Meikhail, A. Elbediwi and E. S. Gouda, “Study of structural changes and properties of Sn-9Zn lead free solder alloy with addition of different alloying elements,” Radiation Effects and Defects in Solids, Vol. 160, pp. 45-49, 2005.
J. Zhao, L. Qi, X. Wang and L. Wang, “Influence of Bi on microstructures evolution and mechanical properties in Sn-Ag-Cu lead-free solder,” Alloys and Compounds, Vol. 375, pp. 196, 2004.
M. Kamal and E. S. Gouda, “Enhancement of solder properties of Sn-9Zn lead-free solder alloy,” Crystal Research and Technology, Vol. 41, No. 12, pp. 1210-1213, 2006.
C. M. Wu, D. Q. Yu, C. M. T. Law and L. Wang, “ The properties of Sn-9Zn lead-free solder alloys doped with trace rare earth elements,” Electronic Materials, Vol. 31, pp. 921-927, 2002.
T. El-Ashram and R. Shalaby, “Effect of rapid solidification and small additions of Zn and Bi on structure and properties of Sn-Cu eutectic alloy,” Electronic Materials, Vol. 34, pp. 212-215, 2005.
B. E. Warren, “X-Ray diffraction,” Addison Wesley, Reading, MA, 1969.
M. Brown, “Introduction to thermal analysis,” Wiley, New York, pp. 33-35, 1986.
W. Wendlandt, “Thermal analysis,” Wiley, New York, pp. 271-274, 1986.
O. Uzuna, T. Karaaslan, M. Gogebakan and M. Keskin, “Hardness and microstructural characteristics of rapidly solidified Al-8-16 wt.%Si alloys,” Alloys and Compounds, Vol. 376, pp. 149, 2004.
M. Kamal, E. S. Gouda and L. Marei, “Effect of Bi addition on hardness and micro creep behavior of Sn-3.5Ag rapidly solidified alloy,” Crystal Research and Technology, Vol. 44, No. 12, pp. 1308-1812, 2009.