Back
 JEMAA  Vol.2 No.3 , March 2010
Design of the Control System about Central Signals in Electric Vehicle
Abstract: Based on the development demand of electric vehicles, this paper studies the communication network in electric vehicles based on CAN bus after analyzing the LCD (liquid crystal display) in electric vehicles and the status quo of research and development trend about communication network. This system uses TMS320LF2407 DSP as the controller of the control system about central signals. It has also developed the LCD system based on CAN bus and the experiment platform which is applied pure electric vehicles.
Cite this paper: nullQ. Zhang, Y. Wang and T. Yin, "Design of the Control System about Central Signals in Electric Vehicle," Journal of Electromagnetic Analysis and Applications, Vol. 2 No. 3, 2010, pp. 189-194. doi: 10.4236/jemaa.2010.23027.
References

[1]   SAE J1939–13, “Off-board diagnostic connector,” Society of Automotive Engineers, USA, July 1999.

[2]   SAE J1939–31, “(R) Network layer,” Society of Automotive Engineers, USA, December 1994.

[3]   R. S. Hourani, “A performance analysis framework for the design of DSP systems,” Dissertation Abstracts International, Vol. 69, No. 4, p. 2517, 2008.

[4]   G. P. Liu, “Anticipating system-level electromagnetic interference using numerical methods and measurement techniques,” Dissertation Abstracts International, Vol. 65, No. 8, p. 4195, 2004.

[5]   H. Huang, “Electrical two speed transmission and ad- vanced control of electric vehicles,” Dissertation Abstracts International, Vol. 60, No. 7, p. 3455, 1998.

[6]   F. Fang, “A solid state relay battery management system for series connected batteries,” Dissertation Abstracts International, Vol. 63, No. 8, p. 3640, 2002.

[7]   F. S. Zhou, “Reflective and transflective liquid crystal displays,” Dissertation Abstracts International, Vol. 67, No. 1, p. 341, 2005.

 
 
Top