JWARP  Vol.2 No.3 , March 2010
Evaluation and Improvement of Bed Load Formula Using Tapi River Data, India
ABSTRACT
The effect of non uniformity of bed material on the sediment transport has been studied by various investi-gators in the past. In the present paper the bed load transport rate has been estimated for non uniform bed material considering the various variables like discharge, hydraulic mean depth, flow velocity, bed slope, average diameter of particle etc. by collecting field data of Tapi River. The majority of the bed load formulae represent a functional relationship between bed load discharge and shear stress. This study focuses on evalu-ating the bed load using Einstein’s formulae. The bed load of pre monsoon season is estimated using various field parameters. The mathematical model has been developed using effective shear stress and bed load dis-charge. The statistical analysis, multiple regression and curve fitting (by nonlinear square fitter) is carried out using allometric function of Micro cal Origin 7.5. The proposed model has been tested using five years field data of Tapi River other than that used for the development of model. The value of rmse is close to zero in-dicates a perfect fit between measured and predicted values. The inequality coefficient is close to 0.50 sug-gest moderate relationship between estimated and computed bed load.

Cite this paper
nullS. Yadav and B. Samtani, "Evaluation and Improvement of Bed Load Formula Using Tapi River Data, India," Journal of Water Resource and Protection, Vol. 2 No. 3, 2010, pp. 245-250. doi: 10.4236/jwarp.2010.23028.
References
[1]   H. A. Einstein, “Formular for the transportation of bed load,” Transportation ASCE, Vol. 107, pp. 561–573, 1942.

[2]   J. C. Bathurst, W. H. Graf, and H. H. Cao “Bed load discharge equations for steep mountain rivers, Sediment transport in gravel Bed Rivers,” Wiley, U. K. Chichester, pp. 453–477, 1987.

[3]   R. L. Beschta “Conceptual models of sediment transport in streams, sediment transport in gravel-bed rivers,” C. R. Thorne, J. C. Bathurst, and R. D. Hey, eds., Wiley, U. K. Chichester, pp. 387–419, 1987.

[4]   W. W. Emmett “Bed load transport in two large, gravel- bed rivers,” Idaho and Washington Proceedings of 3rd Federal Inter-Agency Sedimentation Conference, Denver, Vol. 4, pp. 101–114, 1976.

[5]   J. G. Elliott, J. E. Kircher, and P. Von Guerard “Sediment transport in the lower Yampa River, northwestern Colorado,” US Geology Survey Water Resource Investigations Report, No. 84–4141, pp. 44, 1984.

[6]   B. Gomez and M. Church, “An assessment of bed loads sediment transport formulae for gravel Bed Rivers,” Water Resources Research, Vol. 25, No. 6, pp. 1161–1186, 1989.

[7]   M. Bravo-Espinosa, “Prediction of bed load discharges for alluvial channels,” PhD dissertation, University of Arizona, Tucson, Arizona, pp. 276, 1999.

[8]   M. H. Helmut and B. L. Jonathan, “Evaluation and improvement of bed load discharge formulas based on Helly –Smith sampling in an Alpine gravel bed rivers,” Journal of Hydraulic Engineering, Vol. 128, No. 5, pp 484–499, 2002.

[9]   N. S. Cheng, “Exponential formula for bed load transport, JHE, ASCE, Vol. 128, No. 10, October 2002.

[10]   B. K. Samtani, “Study of sediment transport characteristics with reference to major Rivers of South Gujarat,” Ph.D. Thesis, Faculty of Technology and Engineering, M. S. University of Baroda, India, 2002.

[11]   R. J. Garde and K. G. Ranga Raju, “Mechanics of sediment transportation and alluvial stream problems, Third ed., New Age Publication, New Delhi, 2006.

[12]   Central Water Commission (1980–1995), Water Resources Organization (NR), Integrated Water Year Book, Tapi Basin, Western River Circle, Nagpur, Tapi Division.

[13]   Central Water Commission (1980–1995), Bed Material Analysis Data, Western River Circle, Nagpur, Tapi Division.

 
 
Top