ABSTRACT To complete the previously information issued on the feasibility study and some technical challenges identi-fied from the application of bacterial technology, this study presents another characteristics of numerical output as the bacterial growth is now also limited to ammonium nitrogen and water temperature. Based on the results obtained, it is found that the degradation of readily biodegradable COD will be much slower be-cause of lower bacterial growth. At certain period, the COD concentration will increase and be plotted higher later on compared to the model which is limited only to substrate and oxygen. Besides the ammonium nitro-gen, other parameters i.e. particulate products from COD decay and particulate degradable organic nitrogen will also increase soon after certain time. Considering the increase of ammonium nitrogen as it is also con-verted to nitrate nitrogen, it can be predicted that some algae may show up during the treatment processes. When the model is simulated under different water temperature, slower biodegradation process is presented at lower water temperature. Because the bacteria grow better at higher water temperature, more oxygen is then required. Finally, from this study, it is also identified that the artificial mixing and addition of oxygen at initial stage of treatment will considerably influence the restoration.
Cite this paper
nullD. Yudianto and Y. Xie, "Influences of Limited Ammonium Nitrogen and Water Temperature on the Urban Stream Restoration Using Bacterial Technology – View from the Perspective of Numerical Modelling," Journal of Water Resource and Protection, Vol. 2 No. 3, 2010, pp. 227-234. doi: 10.4236/jwarp.2010.23026.
 K. V. Ellis, “Surface water pollution and its control,” the Macmillan Press Ltd, London, 1989.
G. H. Jirka and V. Weitbrecht, “Mixing models for water quality management in rivers: Continuous and instanta-neous pollutant releases,” in P. M. Rowinski and W. Czernuszenko, Eds., “Water quality hazards and disper-sion of pollutants,” Springer, New York, pp. 1–34, 2005.
M. Campolo, P. Andreussi, and A. Soldati, “Water qual-ity control in the river Arno, technical note,” Water Re-sources, Vol. 36, No. 10, pp. 2673–2680, 2002.
P. R. Kannel, S. Lee, Y. S. Lee, S. R. Kanel, and G. J. Pelletier, “Application of automated QUAL2Kw for wa-ter quality modeling and management in the Bagmati River, Nepal,” Ecological Modelling, Vol. 202, No. 3–4, pp. 503–517, 2007.
D. Yudianto and Y. B. Xie, “The feasibility of bacteria application for treating the polluted urban stream from the perspective of numerical modelling,” in Press for Polish Journal of Environmental Studies, 2010.
I. Gupta, S. Dhage, A. A. Chandorkar, and A. Srivastav, “Numerical modeling for thane creek,” Environmental Modelling and Software, Vol. 19, No. 6, pp. 571–579, 2004.
A. K. Misra, P. Chandra, and J. B. Shukla, “Mathematical modeling and analysis of the depletion of dissolved oxy-gen in water bodies,” Nonlinear Analysis: Real World Applications, Vol. 7, No. 5, pp. 980–996, 2006.
M. Green, I. Safray, and M. Agami, “Constructed wet-lands for river reclamation: Experimental design, start-up and preliminary results,” Bioresource Technology, Vol. 55, No. 2, pp. 157–162, 1996.
S. R. Jing, Y. F. Lin, D. Y. Lee, and T. W. Wang, “Nu-trient removal from polluted river water by using con-structed wetlands,” Bioresource Technology, Vol. 76, No. 2, pp. 131–135, 2001.
D. F. Juang and P. C. Chen, “Treatment of polluted river water by a new constructed wetland,” International Jour-nal of Environmental Science and Technology, Vol. 4, No. 4, pp. 481–488, 2007.
J. B. Zhou, M. M. Jiang, B. Chen, and G. Q. Chen, “Emergy evaluations for constructed wetland and con-ventional wastewater treatments,” Communications in Nonlinear Science and Numerical Simulation, Vol. 14, No. 4, pp. 1781–1789, 2007.
Z. M. Chen, B. Chen, J. B. Zhou, Z. Li, Y. Zhou, X. R. Xi, C. Lin, and G. Q. Chen, “A vertical subsurface-flow constructed wetland in Beijing,” Communications in Nonlinear Science and Numerical Simulation, Vol. 13, No. 9, pp. 1986–1997, 2008.
H. S. Cheng, M. K. Yusoff, B. Shutes, and M. Mansor, “Nutrient removal in a pilot and full scale constructed wetland, Putrajaya city, Malaysia,” Journal of Environmental Management, Vol. 88, No. 2, pp. 307–317, 2008.
Q. Y. Nie, Y. B. Xie, J. Zhuang, and L. L. She, “Cyano-bacter ia control using microorganism,” World Sci-Tech Research and Development,” Vol. 30, No. 4, pp. 430–432, 2008.
J. Liao, Y. B. Xie, X. C. Zong, and G. J. Cao, “Pilot study on treatment of complicated chemical industrial effluent with CABRM process,” Pollution Control Technology, Vol. 21, No. 1, pp. 11–15, 2008.
D. Yudianto and Y. B. Xie, “Numerical modelling per-spectives on the identification of initial challenges of polluted urban stream restoration using bacterial tech-nology,” Submitted to International Journal of Environ-mental Research, unpublished.
Q. H. Wu, R. D. Zhang, S. Huang, and H. J. Zhang, “Ef-fects of bacteria on nitrogen and phosphorus release from river sediment,” Journal of Environmental Sciences, Vol. 20, pp. 404–412, 2008.
J. Kiusalaas, “Numerical method in engineering with MATLAB,” Cambridge University Press, New York, 2005.
S. M. Libelli, G. Pacini, C. Barresi, E. Petti, and F. Sina-cori, “An interactive georeferenced water quality model,” in Proceedings of the Fifth International Conference on Hydroinformatics, IWA Publishing and the Authors, Car-diff, UK, pp. 451–456. 2002.
E. Holzbecher, “Environmental modelling using MAT-LAB,” Springer, Berlin, 2007.
M. Yuceer, E. Karadurmus, and R. Berber, “Simulation of river streams: Comparison of a new technique with QUAL2E,” Mathematical and Computer Modelling, Vol. 46, No. 1, 2, pp. 292–305, 2007.
D. Yudianto and Y. B. Xie, “Contaminant distribution under non-uniform velocity of steady flow regimes,” Journal of Applied Science in Environmental Sanitation, Vol. 3, No. 1, pp. 29–40, 2008.
D. Yudianto and Y. B. Xie, “The development of simple DO sag curve in lowland non-tidal river using MAT-LAB,” Journal of Applied Science in Environmental Sanitation, Vol. 3, No. 2, pp. 80–98, 2008.
D. Yudianto and Y. B. Xie, “A comparison of some nu-merical methods in solving 1-D steady state advection dispersion reaction equation by using MATLAB,” Online Published in Civil Engineering and Environmental Sys-tem, In Press for 2010.
S. M. Kashefipour and R. A. Falconer, “Longitudinal dispersion coefficients in natural channels,” Water Re-search, Vol. 36, No. 6, pp. 1596–1608, 2002.
S. Wallis and R. Manson, “On the theoretical prediction of longitudinal dispersion coefficients in a compound channel,” In W. Czernuszenko and P. M. Rowinski, Eds., “Water quality hazards and dispersion of pollutants,” Springer, New York, pp. 69–84, 2005.
U. Jeppsson, “Modelling aspects of wastewater treatment processes,” Ph.D. Dissertation, Lund Institute of Tech-nology, ISBN 91-88934-00-4, 1996.
U. Wiesmann, I. S. Choi, and E. M. Dombrowski, “Fun-damentals of biological wastewater treatment,” Willey- VCH Verlag Gmbh & Co. KGaA, Weinheim, 2007.
G. L. Jones, “A mathematical model for bacterial growth and substrate utilization in the activated sludge process,” in A. James, Ed., “Mathematical models in water pollu-tion control,” John Willey and Sons, Avon, pp. 265–279, 1978.
J. L. Schnoor, “Environmental modeling: Fate and trans-port of pollutants in water, air, and soil,” John Wiley and Sons, New York, 1996.
G. Pelletier and S. Chapra, “A modeling framework for simulating river and stream water quality,” Environ-mental Assessment Program, Olympia, Washington, pp. 98504–7710, 2006.
Ministry of Environmental Protection of the People’s Republic of China and General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Environmental Quality Standard of People’s Republic of China for Surface Water (GB3838- 2002), Beijing, 2002.