WSN  Vol.2 No.2 , February 2010
Energy Harvesting Strategy Using Piezoelectric Element Driven by Vibration Method
ABSTRACT
This study demonstrates a method for harvesting the electrical power by the piezoelectric actuator from vibration energy. This paper presents the energy harvesting technique using the piezoelectric element of a bimorph type driven by a geared motor and a vibrator. The geared motor is a type of PWM controlled device that is a combination of an oval shape cam with five gears and a speed controller. When using the geared motor, the piezoelectric element is size of 36L×13W×0.6H. The output voltage characteristics of the piezoelectric element were investigated in terms of the displacement and vibration. When using the vibrator, the electric power harvesting is based on piezoelectric effect and piezoelectric vibrator consists of a magnetic type oscillator, a cantilever, a bimorph actuator and controllers. Low frequency operating technique using piezoelectric vibrator is very important because normal vibration sources in the environment such as building, human body, windmill and ship have low frequency characteristics. We can know from this study results that there are many energy sources such as vibration, wind power and wave power. Also, these can be used to the energy harvesting system using smart device like piezoelectric element.

Cite this paper
nullD. Kim, S. Yun, Y. Ham and J. Park, "Energy Harvesting Strategy Using Piezoelectric Element Driven by Vibration Method," Wireless Sensor Network, Vol. 2 No. 2, 2010, pp. 100-107. doi: 10.4236/wsn.2010.22014.
References
[1]   A. Joseph, Paradiso, and T. Starner, “Energy scavenging for mobile and wireless electronics,” IEEE Pervasive Computing, Vol. 4, Issue 1, pp.18–27, 2005.

[2]   R. Stephen, Platt, S. Farritor, and H. Haider, “On low- frequency electric power generation with PZT ceramics,” IEEE/ASME Transactions on Mechatronics, Vol. 10, No. 2, pp. 240–252, 2005.

[3]   T. Starner, “Thick clients for personal wireless devices,” IEEE Computer, Vol. 35, No. 1, pp.133–135, 2002.

[4]   S. R. Anton and H. A. Sodano, “A review of power harvesting using piezoelectric materials (2003–2006),” Smart material and Structures, Vol. 16, No. 3, pp. 1–21, 2007.

[5]   J. Kymissis, C. Kendall, J. Paradiso, and N. Gershenfeld, “Parasitic power harvesting in shoes,” Proceeding of the Second IEEE International Conference on Wearable Computing (ISWC), pp. 132–139, 1998.

[6]   R. P. Stephen, S. Farritor, K. Garvin, and H. Haider, “The use of piezoelectric ceramics for electric power generation within orthopedic implants,” IEEE/ASME Transactions on Mechatronics, Vol. 10, No. 4, pp. 455–461, 2005.

[7]   S. Priya, “Modeling of electric energy harvesting using piezoelectric windmill,” Applied Physics Letters, Vol. 87, No. 18, 184101–1–3, 2005.

[8]   H. A. Sodano, G, Park and D. J. Inman, “Estimation of electric charge output for piezoelectric energy harvesting,” Blackwell Publishing Ltd, Vol. 40, No. 2, pp. 49–58, 2004.

[9]   H. C. Kim, H. C. Song, D.-Y. Jeong, H.-J. Kim, S.-J. Yoon, and B. K. Ju, “Frequency tuning of unimorph cantilever for piezoelectric energy harvesting,” Korean Journal of Materials Research, Vol. 17, No. 12, 660–663, 2007.

 
 
Top