H. M. Widatallah, C. Johnson, F. J. Berry, and M. Pekala, “Synthesis, structural, and magnetic characterisation of magnesium-doped lithium ferrite of composition Li0.5Fe2.5 O4,” Solid State Communications, Vol. 120, pp. 171–175, October 2001.
 H. M. Widatallah and F. J. Berry, “The influence of mechanical milling and subsequent calcination on the formation of lithium ferrites,” Journal of Solid State Chemistry, Vol. 164, pp. 230–236, March 2002.
 H. Yang, Z. Wang, M. Zhao, J. Wang, D. Han. H. Luo, and L. Wang, “A study of the magnetic properties of nanocrystalline LiFe5O8 and Li0.5Fe2.3Cr0.2O4 particles,” Materials Chemistry and Physics, Vol. 48, pp. 60–63, March 1997.
 A. Ahniyaz, T. Fujwara, S. Song, and M. Yoshimura, “Low temperature preparation of β-LiFe5O8 fine particles by hydrothermal ball milling,” Solid State Ionics, Vol. 151, pp. 419–423, November 2002.
 R. Laishram, C. Prakash, S. Phanjoubam, and H. N. K. Sarma, “M?ssbauer effect studies on lithium ferrite substituted with chromium and antimony,” Modern Physics Letters, Vol. B17, pp. 67–73, January 2003.
 E. J. Cukauskas, L. H. Allen, H. S. Newman, R. L. Henry, and P. K. Van Damme, “The properties of Y1Ba2Cu3O7?δ thin films with silver doping prepared by spray pyrolysis,” Journal of Applied Physics, Vol. 67, pp. 6946–6952, June 1990.
 S. Singhal, A. N. Garg and K. Chandra, “Evolution of the magnetic properties during the thermal treatment of nanosize BaMFe11O19 (M=Fe, Co, Ni and Al) obtained through aerosol route,” Journal of Magnetism and Magnetic Materials, Vol. 285, pp. 193–198, January 2005.
 S. Singhal, S. K. Barthwal, and K. Chandra, “Preparation and characterization of nanosize nickel-substituted cobalt ferrites (Co1?xNixFe2O4),” Journal of Solid State Chemistry, Vol. 178, pp. 3183–3189, October 2005.
 S. Singhal, S. K. Barthwal, and K. Chandra,” Structural, magnetic and M?ssbauer spectral studies of nanosize aluminum substituted Nickel-zinc ferrites,” Journal of Magnetism and Magnetic Materials, Vol. 296, pp. 94–103, January 2006.
 A. C. F. Costa, E. Tortella, M. R. Morelli, E. F. Neto, and R. H. G. A. Kiminami, “Sintering of Ni-Zn ferrite nano- powders by the constant heating rate (CHR) method, Materials Research,” Vol. 7, pp. 523–528, December 2004.
 Y. G. Ma, M. Z. Jin, M. L. Liu, G. Chen, Y. Sui, Y. Tian, G. J. Zhang, and Y. Q. Jia, “Effect of high pressure on M?ssbauer spectra of NiFe2O4 ultrafine particles with different grain sizes, ” Materials Chemistry and Physics, Vol. 65, pp. 79–84, June 2000.