JEMAA  Vol.1 No.4 , December 2009
Optimal Design and Control of a Torque Motor for Machine Tools
Abstract: This paper presents a systematic approach of optimal design and control of a surface-mount, permanent-magnet synchronous torque motor for the next-generation machine tools. A step-by-step procedure of optimization integrates multiple performance objectives and constraints to help the designer make the best decision on the final motor geometry from both design and control perspectives. In the perspective of design, a torque motor with concentrated windings and similar numbers of slots and poles may achieve the desired performance after optimization for multiple objectives, leading to a sinusoidal flux density for a nearly ripple-free torque distribution. From the control perspective, an optimal current waveform with an ideal shift angle is determined for each phase by aligning the current excitation with the back electromotive force. Both design and control of the surface-mount, permanent magnet machine are verified by the finite element method, and a prototype is fabricated for performance validation.
Cite this paper: nullY. YANG, S. YANG and J. LIU, "Optimal Design and Control of a Torque Motor for Machine Tools," Journal of Electromagnetic Analysis and Applications, Vol. 1 No. 4, 2009, pp. 220-228. doi: 10.4236/jemaa.2009.14033.

[1]   B. Stumberger, G. Stumberger, M. Hadziselimovic, A. Hamler, M. Trlep, V. Gorican, and M. Jesenik, “High- performance permanent magnet brushless motors with balanced concentrated windings and similar slot and pole numbers,” Journal of Magnetism and Magnetic Materials, Vol. 304, pp. e829–e831, 2006.

[2]   D. Ishak, Z. Q. Zhu, and D. Howe, “Comparison of PM brushless motors, having either all teeth or alternate teeth wound,” IEEE Transactions on Energy Conversion, Vol. 21, pp. 95–103, 2006.

[3]   C. C. Hwang, S. P. Cheng, and C. M. Chang, “Design of high-performance spindle motors with concentrated windings,” IEEE Transactions on Magnetics, Vol. 41, pp. 971–973, 2005.

[4]   J. Cros and P. Viarouge, “Synthesis of high performance PM motors with concentrated windings,” IEEE Transa- ction on Energy Conversion, Vol. 17, pp. 248–253, 2002.

[5]   M. F. Hsieh and Y. S. Hsu, “An investigation on influence of magnet arc shaping upon back electromotive force waveforms for design of permanent-magnet brushless motors,” IEEE Transactions on Magnetics, Vol. 41, pp. 3949–3951, 2005.

[6]   M. S. Islam, S. Mir, T. Sebastian, and S. Underwood, “Design considerations of sinusoidally excited perma- nent-magnet machines for low-torque-ripple applica- tions,” IEEE Transactions on Industry Applications, Vol. 41, pp. 955–962, 2005.

[7]   Y. P. Yang, W. C. Huang, and C. W. Lai, “Optimal design of rim motor for electric powered wheelchair,” IET Electric Power Applications, Vol. 1, pp 825–832, 2007.

[8]   T. M. Jahns and W. L. Soong, “Pulsating torque minimization techniques for permanent magnet AC motor drives-a review,” IEEE Transactions on Industrial Electronics, Vol. 43, pp. 321–330, 1996.

[9]   T. F. Chan, W. Wang, P. Borsje, Y. K. Wong, and S. L. Ho, “Sensorless permanent-magnet synchronous motor drive using a reduced-order rotor flux observer,” IET Electric Power Applications, Vol. 2, pp. 88–98, 2008.

[10]   T. Kim, H. W. Lee, and M. Ehsani, “Position sensorless brushless DC motor/generator drives: Review and future trends,” IET Electric Power Applications, Vol. 1, pp. 557–564, 2007.

[11]   Y. P. Yang and D. S. Chung, “Optimal design and control of a wheel motor for electric passenger cars,” IEEE Transactions on Magnetics, Vol. 43, 2007, pp. 51–61.

[12]   Z. Q. Zhu and D. Howe, “Influence of design parameters on cogging torque in permanent magnet machines,” IEEE Transactions on Energy Conversion, Vol. 15, 2000, pp. 407–412.

[13]   V. Ostovic, “Computer-aided analysis of electric mach- ines,” New York: Prentice Hall, 1994.

[14]   C. T. Tseng, W. C. Liao, and T. C. Tang, “MOST user's manual,” in Mechanical Engineering, 1.2ed Taiwan, Hsinchu: National Chiao-Tung University, 1993.

[15]   Y. P. Yang, Y. P. Luh and C. H. Cheung, “Design and control of axial-flux brushless dc wheel motors for electric vehicles – Part I: multi-objective optimal design and analysis,” IEEE Transactions on Magnetics, Vol. 40, No. 4, July 2004, pp.1873–1882.