Statistical Analysis of Groundwater Quality Parameters for Harrana and Azraq Basins, Jordan ()
1. Introduction
Generally, groundwater wells penetrating either the same aquifer or different aquifers have different water quality characteristics type (Postma & Appelo, 1999). The groundwater quality does not depend only on natural factors such as the lithology of the aquifer, quality of recharged water, and type of interaction between water and aquifer. Human activities, which may significantly affect the quality, can alter the groundwater systems either through pollution or changing the hydrological prevailing conditions (Helena et al., 2000).
Statistical analysis approach is used to interpret the water quality of groundwater resources in the study area which is highly influenced by geological, lithological and urbanization conditions of the area (Quennel, 1956; Bender, 1974; El-Naqa et al., 2007; Obeidat & Rimawi, 2017). The prevailing geological conditions and the lithological variation of the groundwater aquifers are highly influencing the hydrochemical characteristics of the groundwater resources, which are extremely affected by the dissolution processes of the major and minor mineralogical compositions of the aquifer (Saravanakumar & Ranjith Kumar, 2011; Vikal, 2009). The natural variation may be attributed to the depositional environment. The variation in the hydrochemical characteristics of the groundwater can be used to explain the prevailing condition using different statistical analyses (El-Naqa et al., 2007; Obeidat & Rimawi, 2017).
Statistical analyses including descriptive statistics of water quality parameters represented by mean, standard deviation (SD), and range are described and discussed herein. Pearson correlation matrix was conducted to find the bivariate relationships between water quality parameters. Factor analysis with varimax rotation was conducted on standardized data and factor loading of the variables was obtained. Hierarchical cluster analysis was used to group Area 1 and Area 2 wells of Harrana and Azraq, respectively. Complete linkage was used depending on Pearson distance (Helena et al., 1999; Singh et al., 2004; Zeng & Rasmussen, 2005; Praus, 2005; Karthikeyan et al., 2017).
2. Geologic Setting
2.1. Study Area
The study Area 1 is located within Amman Governorate, Central-Eastern Jordan with an area of 1200 Km2 (latitude: 31˚45' - 31˚25' longitude: 36˚20' - 36˚50'), whereas the study Area 2 is located in Al Zarqa Governorate, East Jordan with an area of 300 Km2 (latitude: 31˚45' - 31˚37' longitude: 37˚02' - 37˚15'). The number of studied wells is 36 in Area 1 and 24 wells in Area 2 (Figure 1).
2.2. Geology of the Study Area
Study Area 1 is a part of the Central Desert of east Jordan as defined by Bender (1974). Wadi Dabi and Harrana area form most of Area 1, rocks exposed in this area ranges from Upper Cretaceous to Eocene in age. The bedrocks consist mainly of Balqa Group and Superficial Quaternary deposits, as it appears in the geologic map (Figure 2) (Quennel, 1956; Bender, 1974; Abu Qudairah, 1997; Al Hiyari & Halasa, 2009; Al Hunjul, 1999; Fadda, 1997; Abdelhamid, 1997). Three formations of the Balqa Group can be distinguished as follows: Muwaggar Chalk Marl (MCM), Umm Rijam Chert Limestone (URC), and Shalala Formations in addition to the Azraq Formation. Many wadis, such as Wadi Harrana and Wadi Dabi (Figure 2), dissect Harrana Basin.
Figure 1. Location map of observation wells in Area 1 and Area 2.
The entire Azraq Basin is dissected by an extensive network of wadis, especially in the limestone areas, a graben trending northwest-southeast is the dominant structure whereas; Jabal Fuluk Fault is the main fault in the northern part of this graben. Some faults extend northwest-southeast parallel to the graben (Figure 3), whereas others have a north-northwest-south-southeast strike (El-Naqa et al., 2007) (Figure 3).
The detailed hydrogeological and hydrochemistry study was carried out by Obeidat and Rimawi (2017). The study emphasized the complexity of the hydrological setting for both basin and confirms the existence of hydrogeological seals above and below the oil shale for certain wells to apply the heating in situ technology. The bedrocks consist of Balqa Group and Superficial Quaternary deposits are classified into three Formations; Wadi Shallala Formation, Qirma Formation, Azraq Formation in addition to Pleistocene and Alluvium deposits as shown in the geologic map (Figure 4).
3. Material and Method
3.1. Sample Collection
Sixty Water samples (Area 1: 36; Area 2: 24) were collected from several groundwater wells in both areas (areas 1 and 2) for the period Dec. 2011 to July 2015 (project period). Water samples were collected after 4 hours of water pumping from each well; in plastic bottles for normal chemical analyses of major cations and anions and in 40 mm glass bottles for organic analyses. Directly after collection, the samples were transported to the laboratory in a refrigerator and then analyzed in the Laboratories of Water Authority Laboratories of Ministry of Water and Irrigation of Jordan, Geology Department of The University of Jordan, and Al control Laboratories in the UK.
3.2. Method of Analysis
The physical tests, which include total dissolved solids (TDS) and electrical conductivity, and the chemical tests, which include pH, total hardness (TH), calcium, magnesium, sodium, potassium, sulfate, nitrate, and chloride, were conducted according to the standard methods (APHA et al., 2013).
Conductivity, pH total dissolved solids and temperature PC 300 series Cyber Scan portable meter have been used to measure the various field parameters. The major cations and the major anions and traces and heavy metals have been analyzed in international laboratories following international standards procedures. The results were statically analyzed using a simple Pearson correlation to find the relationships between the parameters. Factor analysis is conducted as an attempt to explain the groundwater quality parameter variations. Statistical analysis was also used to classify the studied wells according to their water quality using complete linkage cluster analysis. The statistical results were considered significant at p ≤ 0.05.
Figure 3. Regional fault system around Area 1 and Area 2—map extracted from JOSCO files (Personal Communication 2015).
4. Results and Discussion
4.1. Correlation Matrix
4.1.1. Correlation Matrix for Area 1 Parameters
Table 1 shows the bivariate relationships between groundwater quality parameters in the study area. TDS shows a significant correlation with electrical conductivity, TH, sodium, calcium, magnesium, potassium, chloride, sulfate, strontium, and boron. Additionally, nitrates correlation with major and measured trace elements did not reach the significance level, while sulfate showed a significant positive relationship with fluoride, strontium, and boron. Also, arsenic and barium did not reach a significant level, while boron showed positive significant correlation with all major elements, fluoride, and strontium. Furthermore, electrical conductivity showed a significant direct correlation with strontium and boron.
4.1.2. Correlation Matrix for Area 2 Parameters
Table 2 shows the bivariate relationships between groundwater quality parameters in Area 2. Ammonia showed a significant positive relationship with manganese, boron, chromium, and phosphate. Besides, manganese correlated significantly directly with chromium and phosphate. Aluminum showed a positive significant relationship with BTEX, and chromium showed a direct significant correlation with phosphate, while the later correlate directly with calcium, ammonia, and manganese. Furthermore, electrical conductivity showed a significant direct correlation with boron.
4.2. Factor Analysis
4.2.1. Factor Analysis for the Water Quality Parameters of the Wells in Area 1
Factor analysis extracted five factors from the measured water quality parameters to represent water quality variation in the study area (Table 3). The analysis was conducted using the rotation technique depending on Eigenvalues of 1 or more (Davis, 1973). The extracted five factors represented 76.8% of the variation in groundwater quality within the studied Area 1. The correlation of the parameters with the factors is considered significant when it exceeded the radius of the balanced circle, which is equal to 0.50 calculated from the square root of the division of the number of factors by the number of parameters (Shihab & Al-Rawi, 2005).
Table 1. Correlation matrix for the water quality parameter in Area 1.
Table 2. Correlation matrix for the water quality parameters in Area 2.
The first factor (Factor 1) represents 38.79% of the total variance. This factor shows a significant correlation with magnesium, sulfate, chloride, sodium, calcium, and boron ions also the TH and the TDS and electric conductivity were loaded significantly (Table 3).
Factor 2 represents 15.718% of the total variance in groundwater quality within the study area. Bicarbonate, potassium, boron, and fluoride were loaded on it significantly (Figure 5(a)). This figure also shows a direct strong correlation between potassium ion and bicarbonate as found in the correlation matrix (Table 3). Also, the figure exhibits a weak correlation between bicarbonate and potassium from 1 side from one side versus fluoride from the other side according to the angle between the parameters vectors which is weak when it is about 90 degrees, strong when it is small, and inverse when reaching 180 degrees and around it.
Factor 3 represents 8.228% of the total variance in groundwater quality (Table 3). Nitrate, barium, and silica were loaded significantly on it (Figure 5(b)). The figure shows a strong correlation between nitrate and barium ions and both ions show a negative correlation with silica.
Factor 4 represents 7.335% of the total variance in groundwater quality of the studied area (Table 3), arsenic, and pH loaded significantly (Figure5(c)). The Figureshows a strong correlation between nitrate and pH, and a weak negative correlation with sulfate.
Factor 5 represents 6.772% of the total variance in groundwater quality, Mn and Fe loaded significantly (Figure 5(d)). This figure shows the inverse correlation between manganese and iron and both have a weak correlation with sulfate.
4.2.2. Factor Analysis for the Water Quality Parameters of the Wells in Area 2
Table 4 shows the five factors of the factor analysis extracts according to Eigenvalues (>1) for Area 2 wells. The first factor accounts for almost half the variability in water quality, whereas the second factor assists in describing water quality information of Area 2 wells within 20%. Cations including B, Na, Mg, Ca, and K with anions including Cl, SO4, and NO3 were loaded significantly on Factor 1.
Table 3. The loadings of the Varimax rotation factor analysis of groundwater wells in Area 1.
Figure 6(a) indicates a strong relationship between the cations and anions. The pH showed an inverse relationship with anions and cations. Phosphate chromium and manganese loaded significantly on Factor 2.
Factor 3 denoted 15% of the total variance in groundwater quality within the study area. Alkalinity, ammonia, and boron were loaded on it significantly (Figure6(b)). The Figurealso shows a direct strong correlation between ammonia and alkalinity as found in the correlation matrix (Table 2). The Figureexhibits a weak correlation between ammonia, lead, and alkalinity from one side versus nitrate chloride.
Factor 4 represents the geology of the studied area with 10.0% of the total variance in groundwater quality (Table 4). Arsenic and pH were loaded significantly on it. The weak correlation was observed between arsenic and nitrate (Figure 6(c)).
Table 4. The loadings of the Varimax rotation factor analysis of groundwater wells in Area 2.
Factor 5 represented the lowest percentage of variation in groundwater quality with 10%. Organic and Aluminum was loaded significantly on it, which inversely correlated with each other (Figure 6(d)).
4.3. Cluster Analysis
4.3.1. Cluster Analysis for the Water Quality Parameters of Area 1
Figure 7 shows the results of cluster analysis for the water quality of the deep wells of Area 1. Three clusters were obtained from this analysis. Cluster I had the largest number of wells of 26 with 72.2% and it includes two sub-clusters. Cluster II includes 8 wells (No. 31, 33, 26, 34, 27, 30, 29, and 32) with 22.2% of the studied wells and it includes two sub-clusters. The smallest cluster III includes two wells only (No. 35 and 36) and it represents 5.55% of the studied wells.
Figure 7. Hierarchical dendrogram cluster analysis of water quality parameters of the studied wells in Area 1.
Table 5 shows that the water quality of the wells of Cluster I recorded the lowest mean concentrations of cations, anions, TDS, TH, and conductivity, while the highest concentration of these parameters was recorded in Cluster III wells. On the other hand, Cluster II wells recorded intermediate mean concentrations between Cluster I and III. The distribution of Harrana wells and the clusters are shown in Figure 7.
4.3.2. Cluster Analysis for the Water Quality Parameters of Area 2
Table 6 shows that the water quality of the wells of cluster II recorded the lowest mean concentrations of cations, anions, TDS, TH, and conductivity, while the highest concentration of these parameters was recorded in cluster I wells.
Table 5. The characteristics of the groundwater quality of the groups of wells extracted from cluster analysis for Area 1.
Table 6. The characteristics of the groundwater quality of the groups of wells extracted from cluster analysis for Area 2.
On the other hand, cluster III wells recorded intermediate mean concentrations between clusters II and I. The distribution of wells and the clusters are shown in Area 2 wells are classified into three clusters (Figure 8). Cluster I includes seven wells (No. 1, 5, 14, 15, 23, 24, and 12), with 29.1%. It has two sub-clusters, with the worst water quality as it attained the highest concentrations of cations, anions, TDS, TH, and conductivity (Table 6). Cluster II includes twelve wells (No. 10, 19, 2, 9, 18, 4, 8, 17, 6, 16, 11, and 20) with 50%. It has the lowest concentration of cations, anions, TDS, TH, and conductivity among the Area 2 wells. The lowest number of Area 2 wells was included in Cluster III (No. 3, 22, 7, 13, and 21) with 5 wells which represented 20.8%. This cluster has an intermediate concentration of cations, anions, TDS, TH, and conductivity between clusters II and I.
Figure 8. Hierarchical dendrogram cluster analysis of water quality parameters of the studied wells in Area 2.
5. Conclusion
Correlation analysis showed direct significant relationships between the different major anions and cations in Area 1. For example, Ca2+, Mg2+, K+, Cl−,
, and others. Weak non-significant relationship recorded between nitrates correlation with major and measured trace elements did not reach the significance level. In Area 2, the pH shows a significant inverse correlation with each of TH, calcium, magnesium, sodium, potassium, nitrate ions, and a significant direct relationship with As. Additionally, nitrates and sulfate correlations with measured trace elements did not reach the significance level.
Factor analysis for Area 1 found that 76.8% of the variation in groundwater quality among the studied wells corresponded to the measured parameters. Sodium, chloride, calcite, strontium, magnesium, sulfate, and boron were the earliest, while iron and manganese in the last. Area 2 factor analysis found that 83.28% of the variation in groundwater quality among the studied wells corresponded to the measured parameters the Na+, Cl−, Ca2+, K+, Mg2+, and NO3−. The wells for Area 1 and Area 2 were classified into three water quality groups using cluster analysis.
Ethical Approval and Informed Consent
Not applicable. The study does not involve human or animal subjects.
Acknowledgements
The authors express great gratitude to the Jordan oil shale company for facilitating and providing all the site data.