Back
Open Journal of Composite Materials
ISSN Online: 2164-5655
Google-based IF: 0.91  Citations h5-index & Ranking*
Submission
Top Cited Articles
(131 articles with 1990 citations as of March 2017)

Sort by:
3D Printing of Continuous Carbon Fibre Reinforced Thermo-Plastic (CFRTP) Tensile Test Specimens ,OJCM,Vol.6 No.1, 2016
Frank Van Der Klift Yoichiro Koga Akira Todoroki Masahito Ueda Yoshiyasu Hirano Ryosuke Matsuzaki
Citations: 320(Details)
Investigation of Physical Properties of Graphene-Cement Composite for Structural Applications ,OJCM,Vol.4 No.1, 2014
Ahmadreza Sedaghat Manoj K. Ram A. Zayed Rajeev Kamal Natallia Shanahan
Citations: 138(Details)
Review of Recent Literature on Static Analyses of Composite Shells: 2000-2010 ,OJCM,Vol.2 No.3, 2012
Mohammad S. Qatu Ebrahim Asadi Wenchao Wang
Citations: 91(Details)
Microwave Absorption Properties of Carbon Nanotubes-Epoxy Composites in a Frequency Range of 2 - 20 GHz ,OJCM,Vol.3 No.2, 2013
Zhou Wang Guang-Lin Zhao
Citations: 84(Details)
The Pore Structure of Phosphoaluminate Cement ,OJCM,Vol.2 No.3, 2012
Weilun Wang Peng Liu Ming Zhang Jiashan Hu Feng Xing
Citations: 81(Details)
Comparative Mechanical Properties of Bulk-Fill Resins ,OJCM,Vol.4 No.2, 2014
Atabek Didem Yalçın Gözde Öztaş Nurhan
Citations: 80(Details)
Improvement in Mechanical and Thermo-Mechanical Properties of Epoxy Composite Using Two Different Functionalized Multi-Walled Carbon Nanotubes ,OJCM,Vol.3 No.2, 2013
M. B. A. Salam M. V. Hosur S. Zainuddin S. Jeelani
Citations: 76(Details)
A One Pot Green Synthesis and Characterisation of Iron Oxide-Pectin Hybrid Nanocomposite ,OJCM,Vol.3 No.2, 2013
Foba-Tendo J.Ngenefeme Namanga J. Eko Yufanyi D. Mbom Ndinteh D. Tantoh Krause W. M. Rui
Citations: 58(Details)
Production and Properties of Short Jute and Short E-Glass Fiber Reinforced Polypropylene-Based Composites ,OJCM,Vol.2 No.2, 2012
Md Nuruzzaman Khan Juganta K. Roy Nousin Akter Haydar U. Zaman Tuhidul Islam Ruhul A. Khan
Citations: 54(Details)
Fiber Line Optimization in Single Ply for 3D Printed Composites ,OJCM,Vol.6 No.4, 2016
Yusuke Yamanaka Akira Todoroki Masahito Ueda Yoshiyasu Hirano Ryosuke Matsuzaki
Citations: 45(Details)
Synthesis and Fabrication of Graphene and Graphene Oxide: A Review ,OJCM,Vol.9 No.2, 2019
Adeniji Adetayo Damilola Runsewe
Citations: 37(Details)
Electrical Resistance Change of Carbon/Epoxy Composite Laminates under Cyclic Loading under Damage Initiation Limit ,OJCM,Vol.4 No.1, 2014
Akira Todoroki Daichi Haruyama Yoshihiro Mizutani Yoshiro Suzuki Tesuo Yasuoka
Citations: 35(Details)
Effect of Carboxyl Functionalized MWCNTs on the Cure Behavior of Epoxy Resin ,OJCM,Vol.3 No.2, 2013
Nusrat Jahan Alfred-Tcherbi Narteh Mahesh Hosur Muhammad Rahman Shaik Jeelani
Citations: 32(Details)
Thermal Diffusivity and Thermal Conductivity of Epoxy-Based Nanocomposites by the Laser Flash and Differential Scanning Calorimetry Techniques ,OJCM,Vol.3 No.3, 2013
Jasper Chiguma Edwin Johnson Preyah Shah Natalya Gornopolskaya Wayne E. Jones Jr.
Citations: 30(Details)
Experimental Testing of Composite Panels Reinforced with Cotton Fibers ,OJCM,Vol.2 No.2, 2012
Ioannis G. Raftoyiannis
Citations: 27(Details)
The Effect of Curative Concentration on Thermal and Mechanical Properties of Flexible Epoxy Coated Jute Fabric Reinforced Polyamide 6 Composites ,OJCM,Vol.2 No.4, 2012
Smith Thitithanasarn Kazushi Yamada Umaru S. Ishiaku Hiroyuki Hamada
Citations: 26(Details)
Progressive Crushing of Polymer Matrix Composite Tubular Structures: Review ,OJCM,Vol.7 No.1, 2017
Ali Rabiee Hessam Ghasemnejad
Citations: 24(Details)
Effective Elastic Properties of Honeycomb Core with Fiber-Reinforced Composite Cells ,OJCM,Vol.3 No.4, 2013
F. Ernesto Penado
Citations: 24(Details)
FTIR and Raman Studies of Cellulose Fibers of Luffa cylindrica ,OJCM,Vol.5 No.1, 2015
Chhatrapati Parida Sarat Kumar Dash Chinmay Pradhan
Citations: 24(Details)
Prediction and Analysis of Deposition Efficiency of Plasma Spray Coating Using Artificial Intelligence Method ,OJCM,Vol.2 No.2, 2012
Ajit Behera S. C. Mishra
Citations: 22(Details)
Anatase Titanium Dioxide Coated Single Wall Carbon Nanotubes Manufactured by Sonochemical-Hydrothermal Technique ,OJCM,Vol.3 No.2, 2013
Paul Clemens Xin Wei Bobby L. Wilson Renard L. Thomas
Citations: 22(Details)
3D Nonlinear XFEM Simulation of Delamination in Unidirectional Composite Laminates: A Sensitivity Analysis of Modeling Parameters ,OJCM,Vol.3 No.4, 2013
Damoon Motamedi Abbas S. Milani
Citations: 21(Details)
Processability of Biobased Thermoset Resins and Flax Fibres Reinforcements Using Vacuum Assisted Resin Transfer Moulding ,OJCM,Vol.4 No.1, 2014
J. Schuster Q. Govignon S. Bickerton
Citations: 20(Details)
Energy Absorption of Nano-Reinforced and Sandwich Composites in Ballistic and Low-Velocity Punch-Shear ,OJCM,Vol.2 No.3, 2012
Brahmananda Pramanik P. Raju Mantena
Citations: 18(Details)
Non-Linear Effect of Volume Fraction of Inclusions on The Effective Thermal Conductivity of Composite Materials: A Modified Maxwell Model ,OJCM,Vol.1 No.1, 2011
Sajjan Kumar R. S. Bhoopal P. K. Sharma R. S. Beniwal Ramvir Singh
Citations: 18(Details)
Multi-Scale Modeling of Metal-Composite Interfaces in Titanium-Graphite Fiber Metal Laminates Part I: Molecular Scale ,OJCM,Vol.1 No.1, 2011
Jacob M. Hundley H. Thomas Hahn Jenn-Ming Yang Andrew B. Facciano
Citations: 17(Details)
Physico-Mechanical Properties of Luffa aegyptiaca Fiber Reinforced Polymer Matrix Composite ,OJCM,Vol.5 No.4, 2015
S. I. Ichetaonye I. C. Madufor M. E. Yibowei D. N. Ichetaonye
Citations: 17(Details)
The Effect of Epoxy Concentration and Fibre Loading on the Mechanical Properties of ABS/Epoxy-Coated Kenaf Fibre Composites ,OJCM,Vol.5 No.2, 2015
Hafsat R. Saliu U. S. Ishiaku M. K. Yakubu E. G. Kolawole S. S. Adefila M. B. Abu Bakar Z. A. Moh’d Ishak
Citations: 16(Details)
Enhancement in the Electrical and Thermal Properties of Ethylene Vinyl Acetate (EVA) Co-Polymer by Zinc Oxide Nanoparticles ,OJCM,Vol.5 No.3, 2015
Jose Sebastian Eby T. Thachil Jobin Job Mathen Joseph Madhavan Prince Thomas Jacob Philip M. S. Jayalakshmy Shahrom Mahmud Ginson P. Joseph
Citations: 16(Details)
Flexural Properties of Long Bamboo Fiber/ PLA Composites ,OJCM,Vol.5 No.3, 2015
Shinji Ochi
Citations: 15(Details)
Studies on the Thermo-Mechanical Properties of Gelatin Based Films Using 2-Hydroxyethyl Methacrylate by Gamma Radiation ,OJCM,Vol.2 No.1, 2012
Haydar U. Zaman Mubarak A. Khan Ruhul A. Khan
Citations: 15(Details)
Thermal and Optical Properties of Epoxy/Siloxane Hybrimer Based on Sol-Gel-Derived Phenyl-Siloxane ,OJCM,Vol.5 No.3, 2015
Kuo-Hui Wu Ken-Fa Cheng Cheng-Chien Yang Chung-Pao Wang Chi-I Liu
Citations: 15(Details)
Magnetic Properties Hard-Soft SmCo5-FeNi and SmCo5-FeCo Composites Prepared by Electroless Coating Technique ,OJCM,Vol.2 No.4, 2012
M. Lamichanne B. K. Rai S. R. Mishra V. V. Nguyen J. P. Liu
Citations: 15(Details)
On the Impact of Manufacturing Uncertainty in Structural Health Monitoring of Composite Structures: A Signal to Noise Weighted Neural Network Process ,OJCM,Vol.6 No.1, 2016
Hessamodin Teimouri Abbas S. Milani Rudolf Seethaler Amir Heidarzadeh
Citations: 14(Details)
Studies on Aluminum-Iron Ore in-Situ Particulate Composite ,OJCM,Vol.2 No.1, 2012
S. Sarkar Akhilesh Singh
Citations: 14(Details)
Investigation of the Flexural Properties and Failure Behavior of Unidirectional CF/Nylon 6 and CF/Epoxy Composites ,OJCM,Vol.7 No.4, 2017
Yan Ma Masahito Ueda Tomohiro Yokozeki Toshi Sugahara Yuqiu Yang Hiroyuki Hamada
Citations: 14(Details)
Kinetic Study of Resin-Curing on Carbon Fiber/Epoxy Resin Composites by Microwave Irradiation ,OJCM,Vol.4 No.2, 2014
Daisuke Shimamoto Yusuke Imai, Yuji Hotta
Citations: 14(Details)
Toughness Improvement of Geothermal Well Cement at up to 300°C: Using Carbon Microfiber ,OJCM,Vol.4 No.4, 2014
Toshifumi Sugama Tatiana Pyatina
Citations: 13(Details)
Effect of Refining Parameters on Medium Density Fibreboard (MDF) Properties from Oil Palm Trunk ,OJCM,Vol.3 No.4, 2013
Zawawi Ibrahim Astimar Abdul Aziz Ridzuan Ramli Anis Mokhtar SiJoon Lee
Citations: 13(Details)
Dimensional Stability Properties of Medium Density Fibreboard (MDF) from Treated Oil Palm (Elaeis guineensis) Empty Fruit Bunches (EFB) Fibres ,OJCM,Vol.6 No.4, 2016
Zawawi Ibrahim Mansur Ahmad Astimar Abdul Aziz Ridzuan Ramli Mohd Ariff Jamaludin Suhaimi Muhammed Aisyah Humaira Alias
Citations: 12(Details)
Effect of Fiber Weight Ratio and Fiber Modification on Flexural Properties of Posidonia-Polyester Composites ,OJCM,Vol.6 No.3, 2016
S. Zannen L. Ghali M. T. Halimi M. Ben Hassen
Citations: 12(Details)
Bounding Surface Approach to the Modeling of Anisotropic Fatigue Damage in Woven Fabric Composites ,OJCM,Vol.2 No.4, 2012
Chao Wen Siamak Yazdani Yail J. Kim Magdy Abdulrahman
Citations: 12(Details)
Statistical Analysis of the Tensile Strength of Treated Oil Palm Fiber by Utilisation of Weibull Distribution Model ,OJCM,Vol.4 No.1, 2014
Chin Voon Sia Yoshikazu Nakai Daiki Shiozawa Hiroto Ohtani
Citations: 12(Details)
Falling Weight Impact and Indentation Damage Characterisation of Sandwich Panels for Marine Applications ,OJCM,Vol.2 No.1, 2012
Daniele Ghelli Oris D’Ubaldo Carlo Santulli Eugenio Nisini Giangiacomo Minak
Citations: 11(Details)
Indirect Tensile Characterization of Graphite Platelet Reinforced Vinyl Ester Nanocomposites at High-Strain Rate ,OJCM,Vol.4 No.4, 2014
Brahmananda Pramanik P. Raju Mantena Tezeswi Tadepalli Arunachalam M. Rajendran
Citations: 11(Details)
Out of Plane Thermal Conductivity of Carbon Fiber Reinforced Composite Filled with Diamond Powder ,OJCM,Vol.6 No.2, 2016
M. Srinivasan P. Maettig K. W. Glitza B. Sanny A. Schumacher M. Duhovic J. Schuster
Citations: 10(Details)
Effect of Temperatures on Polymerization Stress and Microleakage of Class V Composite Restorations ,OJCM,Vol.3 No.4, 2013
Pavinee Padipatvuthikul Didron Wojciech Chrzanowski Ayman Ellakwa
Citations: 10(Details)
Self-Sensing Curved Micro-Strip Line Method for Damage Detection of CFRP Composites ,OJCM,Vol.4 No.3, 2014
Akira Todoroki Kazuhiro Yamada Yoshihiro Mizutani Yoshiro Suzuki Ryosuke Matsuzaki Hiroyasu Fujita
Citations: 9(Details)
Electrical Shorting between the Carbon-Fiber Cloth Electrodes of Structural Capacitors with a Glass-Fiber Cloth Separator ,OJCM,Vol.4 No.3, 2014
Akira Todoroki Hiroko Shiomi Yoshihiro Mizutani Yoshiro Suzuki
Citations: 9(Details)
Characterization of Conductive Nanographite Melamine Composites ,OJCM,Vol.4 No.1, 2014
Claudia Pretschuh Clemens Schwarzinger Ahmed A. Abdala Sulafudin Vukusic
Citations: 9(Details)
Evaluation of Sawdust and Rice Husks as Fillers for Phenolic Resin Based Wood-Polymer Composites ,OJCM,Vol.8 No.3, 2018
Marieme Josephine Lette Elhadji Babacar Ly Diene Ndiaye Akito Takasaki Toshihiro Okabe
Citations: 8(Details)
To Improve Mixed-Mode Interlaminar Fracture Toughness of Composite Sub-Structures ,OJCM,Vol.4 No.1, 2014
Hessam Ghasemnejad Hossein Mirzaii
Citations: 8(Details)
Effect of Reinforcement Clustering on Crack Initiation Mechanism in a Cast Hybrid Metal Matrix Composite during Low Cycle Fatigue ,OJCM,Vol.3 No.4, 2013
A. K. M. Asif Iqbal Yoshio Arai Wakako Araki
Citations: 8(Details)
Influence of Pre-Impregnation Treatment on Bamboo Reinforced Epoxy/UPE Resin Composites ,OJCM,Vol.2 No.4, 2012
Pradeep Kr. Kushwaha Rakesh Kumar
Citations: 8(Details)
Compressive and Flexural Strengths of Cement Stabilized Earth Bricks Reinforced with Treated and Untreated Pineapple Leaves Fibres ,OJCM,Vol.8 No.4, 2018
Nounagnon A. Vodounon Christopher Kanali John Mwero
Citations: 7(Details)
Enhancing the Mechanical Strength for a Microwave Absorption Composite Based on Graphene Nanoplatelet/Epoxy with Carbon Fibers ,OJCM,Vol.9 No.2, 2019
Maryam Jahan Richard Osuemeshi Inakpenu Kuo Li Guanglin Zhao
Citations: 7(Details)
Improvement of Bending Strength of Carbon Fiber/Thermoplastic Epoxy Composites
—Effects of Molecular Weight of Epoxy on Carbon Fiber/Matrix Interfacial Strength and Connection of Cracks in Matrix ,OJCM,Vol.7 No.4, 2017
Hironori Nishida Kazuya Okubo Toru Fujii Valter Carvelli 1 1
Citations: 7(Details)
Nylon/Porphyrin/Graphene Oxide Fiber Ternary Composite, Synthesis and Characterization ,OJCM,Vol.7 No.3, 2017
César García-Pérez Carmina Menchaca-Campos Miguel A. García-Sánchez Elsa Pereyra-Laguna Ociel Rodríguez-Pérez Jorge Uruchurtu-Chavarín
Citations: 7(Details)
Cement Bonded Particle Boards with Different Types of Natural Fibres—Using Carbon Dioxide Injection for Increased Initial Bonding ,OJCM,Vol.8 No.1, 2018
Björn Marteinsson Edgar Gudmundsson 1 1
Citations: 6(Details)
Optical and Morphological Properties of Carbon Nanotube—Anatase Nanocomposites: Improvements in Visible Absorbance ,OJCM,Vol.4 No.1, 2014
Marianna Barberio P. Barone A. Imbrogno A. Bonanno F. Xu
Citations: 6(Details)
Dimensioning of Punctiform Metal-Composite Joints: A Section-Force Related Failure Criterion ,OJCM,Vol.4 No.3, 2014
Holger Seidlitz Lars Ulke-Winter Colin Gerstenberger Lothar Kroll
Citations: 6(Details)
Fatigue Behavior of Open-Holed CFRP Laminates with Initially Cut Fibers ,OJCM,Vol.7 No.1, 2017
Sudarsono Sudarsono Keiji Ogi 1 1
Citations: 6(Details)
Cu/CNF Nanocomposite Processed By Novel Salt Decomposition Method ,OJCM,Vol.1 No.1, 2011
C. Vincent J. M. Heintz J. F. Silvain N. Chandra
Citations: 6(Details)
Automatic Damage Detection and Monitoring of a Stitch Laminate System Using a Fiber Bragg Grating Strain Sensor ,OJCM,Vol.4 No.1, 2014
Agus Trilaksono Naoyuki Watanabe Atsushi Kondo Hikaru Hoshi Yutaka Iwahori
Citations: 6(Details)
Unsymmetrical Fibre-Reinforced Plastics for the Production of Curved Textile Reinforced Concrete Elements ,OJCM,Vol.4 No.4, 2014
Henrik L. Funke Sandra Gelbrich Andreas Ehrlich Lars Ulke-Winter Lothar Kroll
Citations: 6(Details)
Laminate Tailoring of Composite Tubular Structures to Improve Crashworthiness Design at Off-Axis Loading ,OJCM,Vol.8 No.3, 2018
A. Rabiee H. Ghasemnejad
Citations: 6(Details)
Evaluation of HEBM Mechanical Alloying of Al2O3—356/7075 Powder Mixture ,OJCM,Vol.2 No.2, 2012
G. Govender Lilian Ivanchev H. Burger A. Mulaba H. Chikwande
Citations: 6(Details)
Difficulties in the Use of Ground Bacterial Cellulose (BC) as Reinforcement of Polylactid Acid (PLA) Using Melt-Mixing and Extrusion Technologies ,OJCM,Vol.2 No.3, 2012
Katrin Ganß Axel Nechwatal Katrin Frankenfeld Kerstin Schlufter
Citations: 5(Details)
On the Thermal Fatigue of a Room-Cured Neat Epoxy and Its Composite ,OJCM,Vol.9 No.2, 2019
Mbarka Mohamed Michel Johnson Farid Taheri
Citations: 5(Details)
Synthesis and Characterization of APG-12 ,OJCM,Vol.5 No.1, 2015
Jigang Wang Yongle Xin Danting Fan Sitong Chen
Citations: 5(Details)
Dynamic Mechanical Behavior of Luffa cylindrica Fiber-Resorcinol Composites ,OJCM,Vol.5 No.1, 2015
Chhatrapati Parida Chinmay Pradhan Sarat Kumar Dash Sarat Chandra Das
Citations: 5(Details)
A Survey on Effect of Agro Waste Ash as Reinforcement on Aluminium Base Metal Matrix Composites ,OJCM,Vol.9 No.3, 2019
Prasanna P. Kulkarni B. Siddeswarappa Kariyappla Shivashankar Hemanth Kumar
Citations: 5(Details)
Continuous Damage Monitoring of a Thin Composite Structural with Mismatched Stiffener in a Combined Joint Using Fiber Bragg Grating under Tension and Three-Point Loading ,OJCM,Vol.3 No.3, 2013
Agus Trilaksono Naoyuki Watanabe Hikaru Hoshi Atsush Kondo Yutaka Iwahori Shin-Ichi Takeda
Citations: 5(Details)
Frequency Dependence of the b-Value Used for Acoustic Emission Analysis of Glass Fiber Reinforced Plastics ,OJCM,Vol.7 No.3, 2017
Do Yun Jung Yoshihiro Mizutani Akira Todoroki Yoshiro Suzuki
Citations: 5(Details)
On the s±-Wave Superconductivity in the Iron-Based Superconductors: A Perspective Based on a Detailed Study of Ba0.6K0.4Fe2As2 via the Generalized-Bardeen-Cooper-Schrieffer Equations Incorporating Fermi Energy ,OJCM,Vol.7 No.3, 2017
G. P. Malik 1 1
Citations: 4(Details)
The Synthesize and Property Evaluation of High Temperature Resistant Phenolic Resin-Type Profile Control Agent ,OJCM,Vol.4 No.3, 2014
Qingwang Liu Hongwei Mu Jigang Wang Zhenzhong Fan
Citations: 4(Details)
Development of Nickel Alloy Reinforced with Fused SiO2 Chilled Composites and Evaluation of Thermal Properties (Thermal Conductivity & Coefficient of Thermal Expansion) and Temperature Distribution by Finite Element Analysis (FEA) ,OJCM,Vol.7 No.5, 2017
Joel Hemanth
Citations: 4(Details)
The Thermal and Crystallization Studies of Luffa Fiber Reinforced Poly Lactic Acid Composites ,OJCM,Vol.6 No.1, 2016
Chhatrapati Parida Sarat Kumar Dash Pinaki Chaterjee
Citations: 4(Details)
A Study on the Initial Fracture Behavior of CF/GF Intra-Hybrid Woven Fabric Reinforced Composites ,OJCM,Vol.8 No.1, 2018
Zhilan Xu Asami Nakai Yuqiu Yang Hamada Hiroyuki
Citations: 4(Details)
Laser Synthesis of Metal Oxide Crystals with the Use of Carbon Nanotubes ,OJCM,Vol.3 No.2, 2013
Dmitrii V. Abramov Sergei M. Arakelian Dmitrii A. Kochuyev Stepan A. Makov Valerii G. Prokoshev Kirill S. Khorkov
Citations: 4(Details)
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses ,OJCM,Vol.3 No.2, 2013
Stefan Kirchberg
Citations: 3(Details)
The Origin of the Giant Hall Effect in Metal-Insulator Composites ,OJCM,Vol.6 No.3, 2016
Joachim Sonntag
Citations: 3(Details)
Longitudinal Compressive Failure of Multiple-Fiber Model Composites for a Unidirectional Carbon Fiber Reinforced Plastic ,OJCM,Vol.6 No.1, 2016
Tae Kun Jeong Masahito Ueda
Citations: 3(Details)
An Alkali Activated Binder for High Chemical Resistant Self-Leveling Mortar ,OJCM,Vol.6 No.4, 2016
Henrik L. Funke Sandra Gelbrich Lothar Kroll
Citations: 3(Details)
Self-Sensing TDR for Bearing Failure Detection of CFRP Laminate Fastener Hole with Particular Reference to the Effect of Fasteners ,OJCM,Vol.5 No.3, 2015
Akira Todoroki Keisuke Ohara Yoshihiro Mizutani Yoshiro Suzuki Ryosuke Matsuzaki
Citations: 3(Details)
Development of a Composite Material Based on Wood Waste Stabilized with Recycled Expanded Polystyrene ,OJCM,Vol.10 No.3, 2020
Serge Pacome Kaho Koffi Clément Kouadio Conand Honoré Kouakou Edjikémé Eméruwa
Citations: 3(Details)
Preparation of Fluoroalkyl End-Capped Oligomers/Hexagonal Boron Nitride Nanocomposites Possessing No Weight Loss Behavior in Nanocomposites Even after Calcination at 800°C ,OJCM,Vol.9 No.2, 2019
Jittraporn Saengkaew Takahumi Ogasawara Katsumi Yamashita Suwadee Kongparakul Hideo Sawada
Citations: 3(Details)
Influence of Nanocrystalline ZrO2 Additives on the Fracture Toughness and Hardness of Spark Plasma Activated Sintered WC/ZrO2 Nanocomposites Obtained by Mechanical Mixing Method ,OJCM,Vol.2 No.1, 2012
M. Sherif El-Eskandarany Hesham M. A. Soliman M. Omoric
Citations: 3(Details)
The Green Composites: Millet Husk Fiber (MHF) Filled Poly Lactic Acid (PLA) and Degradability Effects on Environment ,OJCM,Vol.9 No.3, 2019
Abba Alhaji Hammajam Abubakar Mohammed El-Jummah Zahari Nur Ismarrubie
Citations: 3(Details)
Computational and Experimental Analyses of Detachment Force at the Interface between Carbon Fibers and Epoxy Resin ,OJCM,Vol.7 No.4, 2017
Kazuki Mori Nobuhiko Matsumoto Sukeharu Nomoto Kenji Tsuruta
Citations: 3(Details)
Identification of Damage Parameters for Intralaminar Damage Modeling in Laminated Composites Considering Transverse Stress Effects ,OJCM,Vol.7 No.4, 2017
Rehs T. Gerrit Shun Kokubo Tomohiro Yokozeki
Citations: 3(Details)
Interfacial Fracture Toughness Evaluation of Poly(L-lactide acid)/Natural Fiber Composite by Using Double Shear Test Method ,OJCM,Vol.4 No.2, 2014
Chin Voon Sia Yoshikazu Nakai Hiroshi Tanaka Daiki Shiozawa
Citations: 3(Details)
Effects of Fiber Volume on Modal Response of Through-Thickness Angle Interlock Textile Composites ,OJCM,Vol.4 No.1, 2014
Marco Villa Richard D. Hale Mark Ewing
Citations: 2(Details)
Controlling the Energy Absorption Capability of a Unidirectional Carbon Fiber Reinforced Plastic Tube Using a Double-Sided Plug ,OJCM,Vol.5 No.1, 2015
Masahito Ueda Takehito Tsuji Tae-Kun Jeong
Citations: 2(Details)
Dynamic Modulus of Elasticity of Some Mortars Prepared from Selected Jordanian Masonry Cements ,OJCM,Vol.9 No.2, 2019
Hamadallah Al-Baijat
Citations: 2(Details)
Validation of Numerical Modeling for the Prediction of Elastic and Failure Behavior of Diamond Powder Filled Woven Composites ,OJCM,Vol.7 No.2, 2017
M. Srinivasan P. Maettig K. W. Glitza B. Sanny A. Schumacher M. Duhovic
Citations: 2(Details)
The Studies on the Surface Organic Modification of Tourmaline Powder with Stearic Acid and Its Composite ,OJCM,Vol.4 No.3, 2014
Yingmo Hu
Citations: 2(Details)
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers ,OJCM,Vol.7 No.2, 2017
Joel Hemanth
Citations: 2(Details)
Towards Reliability-Enhanced Mechanical Characterization of Non-Crimp Fabrics: How to Compare Two Force-Displacement Curves against a Null Material Hypothesis ,OJCM,Vol.9 No.2, 2019
Samia Sultana Armin Rashidi Mohammad Islam Bryn Crawford Abbas S. Milani
Citations: 2(Details)
Effects of Boundary Conditions on Postbuckling Strengths of Composite Laminate with Various Shaped Cutouts under In-Plane Shear ,OJCM,Vol.3 No.2, 2013
Dinesh Kumar Shamsher Bahadur Singh
Citations: 2(Details)
Mechanical Properties of Submicron Glass Fiber Reinforced Vinyl Ester Composite ,OJCM,Vol.9 No.4, 2019
Nguyen T. T. Nhan K. Obunai K. Okubo O. Shibata H. Tomokuni Y. Fujita
Citations: 2(Details)
Influence of Water Ageing on Mechanical Properties of CaCO3 Filler Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites ,OJCM,Vol.9 No.1, 2019
Naveed Anjum Bheemappa Suresha Somanahally Lingaiah Ajit Prasad
Citations: 2(Details)
Experimental Investigation of the Impact of Compression on the Petro-Physical and Micromechanical Properties of Wellbore Cement Containing Salt ,OJCM,Vol.6 No.3, 2016
Arome Oyibo Mileva Radonjic
Citations: 1(Details)
Relationship between the Initial Fracture Stress and Fatigue Limit—Simple Prediction Method of Tensile Fatigue Limit of Composite ,OJCM,Vol.9 No.4, 2019
Y. Imai K. Nishitani G. Fortin A. Ohtani H. Hamada
Citations: 1(Details)
The Reinforcing Effect of Graphene on the Mechanical Properties of Carbon-Epoxy Composites ,OJCM,Vol.10 No.2, 2020
Hadimani Shivakumar N. M. Renukappa K. N. Shivakumar B. Suresha
Citations: 1(Details)
A Mini-Review and Perspective on Current Best Practice and Emerging Industry 4.0 Methods for Risk Reduction in Advanced Composites Manufacturing ,OJCM,Vol.11 No.2, 2021
Bryn Crawford Hamid Khayyam Abbas S. Milani
Citations: 1(Details)
Geometrical Modeling of Walls of Multiwall Carbon Nanotube ,OJCM,Vol.3 No.2, 2013
K. P. S. S. Hembram K. Reddappa Reddy G. Mohan Rao
Citations: 1(Details)
Transparent and Biocompatible Electrodes Based on Carbon Nanotubes/Albumin Composite ,OJCM,Vol.3 No.2, 2013
Dmitry Kireev Ivan I. Bobrinetskiy Alexey S. Seleznev Igor V. Fedorov Alexey V. Romashkin Roman A. Morozov
Citations: 1(Details)
Prediction of the Enhanced Out-of-Plane Thermal Conductivity of Carbon Fiber Composites Produced by VARTM ,OJCM,Vol.6 No.4, 2016
Jens Schuster Martin Schütz Johannes Lutz Laura Lempert
Citations: 1(Details)
Effect of Degree of Cure on Sandwich Structural Capacitor Using Ion-Conductive Polymer with Carbon Fabric Skins ,OJCM,Vol.6 No.4, 2016
Akira Todoroki
Citations: 1(Details)
Advanced Welding Technology for Highly Stressable Multi-Material Designs with Fiber-Reinforced Plastics and Metals ,OJCM,Vol.7 No.3, 2017
Holger Seidlitz Sebastian Fritzsche Marcello Ambrosio Alexander Kloshek
Citations: 1(Details)
Corrosion and Wear Behavior of Nano-Zirconium (Zr) Coated Commercial Grade Cast Iron by Sol-Gel and Plasma Spray Process ,OJCM,Vol.9 No.2, 2019
Joel Hemanth Sara Sowjanya Steevenson
Citations: 1(Details)
Deriving Tensile Properties of Glass Fiber Reinforced Polymers (GFRP) Using Mechanics of Composite Materials ,OJCM,Vol.10 No.1, 2020
Thomas I. Altanopoulos Ioannis G. Raftoyiannis
Citations: 1(Details)
Portland Cement-Residues-Polymers Composites and Its Application to the Hollow Blocks Manufacturing ,OJCM,Vol.3 No.1, 2013
Augusto Cesare Stancato Antonio Ludovico Beraldo
Citations: 1(Details)
Characterization of Reinforced Carbon Composites with Full Field Measurements: Long Gauge Length Compressive Apparatus ,OJCM,Vol.3 No.1, 2013
Mathieu Colin de Verdiere Alexandros A. Skordos Andrew Walton
Citations: 1(Details)
Performance Comparison of CVD Grown Carbon Nanofiber Based on Single- and Multi-Layer Graphene Oxides in Melt-Compounded PA6.6 Nanocomposites ,OJCM,Vol.9 No.2, 2019
Elcin Cakal Sarac Leila Haghighi Poudeh Jamal Seyyed Monfared Zanjani Ilse Letofsky-Papst Fevzi Çakmak Cebeci Ismail Aydin Yusuf Menceloglu Burcu Saner Okan
Citations: 1(Details)
Experimental Investigation on the Properties of Recycled Concrete Using Hybrid Fibers ,OJCM,Vol.9 No.2, 2019
Salim Khoso Janet Raad Azadeh Parvin
Citations: 1(Details)
Electronic Transport in Alloys with Phase Separation (Composites) ,OJCM,Vol.9 No.1, 2019
Joachim Sonntag Bertrand Lenoir Pawel Ziolkowski
Citations: 1(Details)
Supercapacitor Consisting of a Form Core Sandwich with Woven Carbon Fiber Skin ,OJCM,Vol.5 No.4, 2015
Akira Todoroki Tomohiro Sawada Yoshihiro Mizutani Yoshiro Suzuki
Citations: 1(Details)
Preparation of Polymer Composite Particles by Phase Separation Followed by Suspension Polymerization ,OJCM,Vol.7 No.1, 2017
Yoshinari Taguchi Takanori Suzuki Natsukaze Saito Hiroshi Yokoyama Masato Tanaka
Citations: 1(Details)
Measurement of the In-Plane Thermal Conductivity of Long Fiber Composites by Inverse Analysis ,OJCM,Vol.7 No.2, 2017
Bassam Assaf Vincent Sobotka François Trochu
Citations: 1(Details)
Optimum Design for CLD Laminate Plates Using Genetic Algorithms ,OJCM,Vol.4 No.2, 2014
Guang-Min Luo Tsung-Yen Hsieh
Citations: 1(Details)
Elaboration and Characterization of a Hybrid Composite Material with Two Particles of the Same Size: Coco Shells and Palm Shells ,OJCM,Vol.10 No.4, 2020
Pierre Marcel Anicet Noah Ebanda Fabien Betene Suzie Viviane Obame Beassoum Allasra Martin Christian Bindjeme Ateba Atangana
Citations: 1(Details)
Pyrolytic Recycling of Carbon Fibers from Prepregs and Their Use in Polyamide Composites ,OJCM,Vol.10 No.4, 2020
Stephan Schwarz Thomas Höftberger Christoph Burgstaller Andreas Hackl Clemens Schwarzinger
Citations: 1(Details)
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory ,OJCM,Vol.7 No.4, 2017
Wiranphat Thodsaratpreeyakul Putinun Uawongsuwan Akio Kataoka Takanori Negoro Hiroyuki Hamada
Citations: 1(Details)
Influence of the Woven Structure on the Initial Fracture Behavior of Roving Glass Fabric Reinforced Composites ,OJCM,Vol.8 No.2, 2018
Zhilan Xu Atsushi Yokoyama
Citations: 1(Details)
Quasi-Static Flexural Properties of a Pultruded Glass Fiber/Unsaturated Polyester Square Pipe ,OJCM,Vol.9 No.3, 2019
Yuri Imai Gabriel Fortin Badin Pinpathomrat Keigo Nishitani Anin Memon Yuqiu Yang Akio Ohtani Hiroyuki Hamada
Citations: 1(Details)
Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites ,OJCM,Vol.9 No.3, 2019
Rajanna Manjunatha Doddarasinakere Kempaiah Ravishankar Govinda Panduranga Murthy Setty Bengaluru Siddalingaiah Rakesh Chalya Mallappaji Shiva Prasad Rajesh Kumar
Citations: 1(Details)
Crossover to Quantized Thermal Conductance in Nanotubes and Nanowires ,OJCM,Vol.3 No.2, 2013
Kohei Yamamoto Hiroyuki Ishii Nobuhiko Kobayashi Kenji Hirose
Citations: 1(Details)
Wood Particle-Recycled Glass Fiber Hybrid Composites ,OJCM,Vol.7 No.5, 2017
Kayode E. Oluwabunmi Lee M. Smith Sheldon Q. Shi
Citations: 1(Details)
Inspection and Assessment of Highway Bridges in Jordan along the Desert Highway: A Case Study ,OJCM,Vol.9 No.3, 2019
Hamadallah Al-Baijat Mohammad Alhawamdeh
Citations: 1(Details)
 
 
Top