Micromechanical Analysis of Thermal Expansion Coefficients ,MNSMS,Vol.4 No.3, 2014
Christian Karch
Citations: 27(Details)

A First Principles Investigation of the Mechanical Properties of g-TlN ,MNSMS,Vol.2 No.4, 2012
Qing Peng Chao Liang Wei Ji Suvranu De
Citations: 27(Details)

Tool Wear Classification Using Fuzzy Logic for Machining of Al/SiC Composite Material ,MNSMS,Vol.2 No.2, 2012
V. Kalaichelvi R. Karthikeyan D. Sivakumar V. Srinivasan
Citations: 20(Details)

Bonding Characteristics of TiC and TiN ,MNSMS,Vol.3 No.1, 2013
Kuiying Chen Sami Kamran
Citations: 18(Details)

Experimental Study of Surface and Solution Properties of Gemini -conventional Surfactant Mixtures on Solubilization of Polycyclic Aromatic Hydrocarbon ,MNSMS,Vol.3 No.4, 2013
M. Kamil Huma Siddiqui
Citations: 18(Details)

Electrospinning of Gelatin Functionalized with Silver Na-noparticles for Nanofiber Fabrication ,MNSMS,Vol.3 No.4, 2013
Marwa A. Oraby Ahmed I. Waley Ahmed I. El-Dewany Ebtesam A. Saad Bothaina M. Abd El-Hady
Citations: 17(Details)

Theoretical Study on the Origins of the Gap Bowing in Mg_xZn_1–xO Alloys ,MNSMS,Vol.2 No.3, 2012
F. Z. Aoumeur-Benkabou M. Ameri A. Kadoun K. Benkabou
Citations: 15(Details)

Metal Hexaborides with Sc, Ti or Mn ,MNSMS,Vol.3 No.4, 2013
Ian D. R. Mackinnon Jose A. Alarco Peter C. Talbot
Citations: 13(Details)

Computer Modeling and Simulation of Ultrasonic System for Material Characterization ,MNSMS,Vol.1 No.1, 2011
Yogendra B. Gandole
Citations: 11(Details)

Finite Element Analysis of the Groove Pressing of Aluminum Alloy ,MNSMS,Vol.4 No.1, 2014
Mehdi Shaban Ghazani Akbar Vajd
Citations: 11(Details)

Heat Transfer Analysis during External Chilling of Composite Material Castings through Experimental and Finite Element (FE) Modelling ,MNSMS,Vol.4 No.1, 2014
Joel Hemanth
Citations: 11(Details)

New Orbital-Free Approach for Density Functional Modeling of Large Molecules and Nanoparticles ,MNSMS,Vol.5 No.2, 2015
V. Zavodinsky O. Gorkusha
Citations: 10(Details)

Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation ,MNSMS,Vol.4 No.4, 2014
Ling Chen Aylin Ahadi Jinming Zhou Jan-Eric Ståhl
Citations: 10(Details)

Comparison of Functionals for Metal Hexaboride Band Structure Calculations ,MNSMS,Vol.4 No.2, 2014
Jose A. Alarco Peter C. Talbot Ian D. R. Mackinnon
Citations: 10(Details)

Simulation of Graphene Piezoresistivity Based on Density Functional Calculations ,MNSMS,Vol.3 No.4, 2013
Mohammed Gamil Koichi Nakamura Ahmed M. R. Fath El-Bab Osamu Tabata Ahmed Abd El-Moneim
Citations: 9(Details)

Electronic and Optical Properties of Rocksalt CdO: A first-Principles Density-Functional Theory Study ,MNSMS,Vol.3 No.1, 2013
Gang Yao Xinyou An Hongwen Lei Yajun Fu Weidong Wu
Citations: 9(Details)

Synthesis of Barium Nickel Titanium Oxide Stabilized by Citric Acid ,MNSMS,Vol.3 No.1, 2013
K. Y. Chew M. Abu Bakar N.H.H. Abu Bakar
Citations: 7(Details)

Adaptive Neuro-Fuzzy Inference System for Prediction of Effective Thermal Conductivity of Polymer-Matrix Composites ,MNSMS,Vol.2 No.3, 2012
Rajpal Singh Bhoopal Ramvir Singh Pradeep Kumar Sharma
Citations: 7(Details)

Microstructure and Strength Properties of Submicro and Nanocrystalline Nickel under Friction ,MNSMS,Vol.3 No.3, 2013
V. G. Pinchuk S. V. Korotkevich
Citations: 7(Details)

Optimal Design of Thermal Dissipation for the Array Power LED by using the RSM with Genetic Algorithm ,MNSMS,Vol.3 No.1, 2013
Rongsheng Chen Hsin-En Cheng Chihuang Huang Ray-Wen Wu
Citations: 7(Details)

Theoretical and Numerical Comparison of Limit Point Bifurcation and Maximum Force Criteria. Application to the Prediction of Diffuse Necking ,MNSMS,Vol.3 No.1, 2013
Guillaume Altmeyer
Citations: 7(Details)

Prediction and Verification of Resistance Spot Welding Results of Ultra-High Strength Steels through FE Simulations ,MNSMS,Vol.5 No.1, 2015
Oscar Andersson Arne Melander
Citations: 7(Details)

Prediction of the Microstructural Variations of Cold-Worked Pure Aluminum during Annealing Process ,MNSMS,Vol.5 No.1, 2015
Hamid Reza Rezaei Ashtiani Peyman Karami
Citations: 6(Details)

Finite Element Study on the Development of Damage and Flow Characteristics in Al7075 Alloy during Ex-ECAP ,MNSMS,Vol.3 No.1, 2013
Mehdi Shaban Ghazani Beitallah Eghbali
Citations: 6(Details)

CFD Analysis of Influence of Slag Viscosity on the Splashing Process in an Oxygen Steelmaking Converter ,MNSMS,Vol.3 No.3, 2013
Miguel A. Barron Dulce Y. Medina Isaias Hilerio
Citations: 6(Details)

Numerical Simulation on Effects of Electromagnetic Force on the Centrifugal Casting Process of High Speed Steel Roll ,MNSMS,Vol.4 No.1, 2014
Minghu Yuan Leilei Cao Yaozeng Xu Xuding Song
Citations: 6(Details)

The Interlaminar Stress of Laminated Composite under Uniform Axial Deformation ,MNSMS,Vol.3 No.2, 2013
Chuijin Yang Jubing Chen Shexu Zhao
Citations: 6(Details)

Atomistic Simulation of Undissociated 60&deg ; Basal Dislocation in Wurtzite GaN. ,MNSMS,Vol.3 No.4, 2013
I. Belabbas J. Chen Ph. Komninou G. Nouet
Citations: 6(Details)

Modelling of the Quantum Transport in Strained Si/SiGe/Si Superlattices Based P-i-n Infrared Photodetectors for 1.3 - 1.55 μm Optical Communication ,MNSMS,Vol.4 No.1, 2014
Noureddine Sfina Naima Yahyaoui Moncef Said Jean-Louis Lazzari
Citations: 5(Details)

The Improvements of the Backhoe-Loader Arms ,MNSMS,Vol.3 No.4, 2013
Ahmet Erklig Eyüp Yeter
Citations: 5(Details)

Constitutive Modelling of Elastomeric Seal Material under Compressive Loading ,MNSMS,Vol.6 No.2, 2016
Ismail J. Abubakar Peter Myler Erping Zhou
Citations: 5(Details)

The Mechanism of Formation of Glass-Ionomer Cement: A Theoretical Study ,MNSMS,Vol.3 No.4, 2013
Jair Gaviria Claudia G. García Ederley Vélez Jairo Quijano
Citations: 4(Details)

Modeling and Simulation of Laser Assisted Turning of Hard Steels ,MNSMS,Vol.3 No.4, 2013
Omar Abdulghani Mohamed Sobih Amro Youssef Abdel-Monem El-Batahgy
Citations: 4(Details)

Performance Prediction of a Pressurized Entrained Flow Ultra-Fine Coal Gasifier ,MNSMS,Vol.4 No.2, 2014
P. P. Mashingo G. R. John C. F. Mhilu
Citations: 4(Details)

Modeling and Analysis of Low Frequency Noise in Ion-Field-Effect Transistors Sensors ,MNSMS,Vol.4 No.3, 2014
Jihen Chermiti Sawsen Azzouzi Mounir Ben Ali Mhamed Trabelsi Abdelhamid Errachid
Citations: 4(Details)

Groove Design and Microstructure Research of Ultra-Fine Grain Bar Rolling ,MNSMS,Vol.2 No.4, 2012
Xuetong Li Lei Cao Minting Wang Fengshan Du
Citations: 4(Details)

Numerical Simulation of Decarburization in a Top-Blown Basic Oxygen Furnace ,MNSMS,Vol.4 No.3, 2014
Miguel A. Barron Dulce Y. Medina Isaias Hilerio
Citations: 4(Details)

A Numerical Approach on Reduction of Young’s Modulus During Deformation of Sheet Metals ,MNSMS,Vol.2 No.1, 2012
Chetan Nikhare
Citations: 4(Details)

Enhancement of Ferromagnetic Ordering Curie Temperature in N-Doped MgO under Hydrostatic Pressure ,MNSMS,Vol.2 No.2, 2012
Ali Mir Benaissa Bekkouche Abdelkader Boukortt Salima Kacimi Mostefa Djermouni Ali Zaoui
Citations: 3(Details)

The Correctional Model of Population Development Equation ,MNSMS,Vol.3 No.4, 2013
Man Liu Daqing Liao Qianqian Zhu Zhengming Wang
Citations: 3(Details)

A Solute Pinning Approach to Solute Drag in Multi-Component Solid Solution Alloys ,MNSMS,Vol.4 No.1, 2014
Emmanuel Hersent Knut Marthinsen Erik Nes
Citations: 3(Details)

Ketoprofen/ethyl Cellulose Nanofibers Fabricated Using an Epoxy-coated Spinneret ,MNSMS,Vol.3 No.4, 2013
Xiao-Yan Li Deng-Guang Yu Cai-Tao Fu Rui Wang Xia Wang
Citations: 3(Details)

Ballistic Behavior of Heracron^&reg-Based Composites: Effect of the Number Multifilaments on High-Speed Projectiles ,MNSMS,Vol.3 No.3, 2013
Jung Seop Lim
Citations: 3(Details)

Flow-Optimization to Enhance Gas Quenching Efficiency for Helical Gears Specimen ,MNSMS,Vol.4 No.4, 2014
Thibaud Bucquet Udo Fritsching
Citations: 2(Details)

The Influence of Sheath Solvent’s Flow Rate on the Quality of Electrospun Ethyl Cellulose Nanofibers ,MNSMS,Vol.3 No.4, 2013
Deng-Guang Yu Xiong-Xiu Li Jia-Wen Ge Peng-Peng Ye Xia Wang
Citations: 2(Details)

Multiwavelet Boundary Element Method for Cavities Admitting Many NURBS Patches ,MNSMS,Vol.6 No.4, 2016
Maharavo Randrianarivony
Citations: 2(Details)

Electron Density Response to Phonon Dynamics in MgB₂: An Indicator of Superconducting Properties ,MNSMS,Vol.8 No.2, 2018
Jose A. Alarco Peter C. Talbot Ian D. R. Mackinnon
Citations: 2(Details)

Computational Multiaxial Fatigue Modelling for Notched Components* ,MNSMS,Vol.3 No.3, 2013
Ayhan Ince
Citations: 2(Details)

Fractal Cracks Propagation in Aluminum ,MNSMS,Vol.3 No.3, 2013
Francisco Casanova del Angel Jaime Retama Velasco
Citations: 2(Details)

Single Track Laser Surface Hardening Model for AISI 4340 Steel Using the Finite Element Method ,MNSMS,Vol.6 No.2, 2016
Ahmed Ghazi Jerniti Abderazzak El Ouafi Noureddine Barka
Citations: 2(Details)

Numerical Simulation of Stress-Strain State for Nonhomogeneous Shell-Type Structures Based on the Finite Element Method ,MNSMS,Vol.3 No.4, 2013
Eteri L. Hart Vadim S. Hudramovich Sergey A. Ryabokon Elena V. Samarskaya
Citations: 2(Details)

Effects of Orientation of Carbon Nanotubes on CNT Bundle Based Silk Composite Using Finite Element Method ,MNSMS,Vol.3 No.1, 2013
Md Shihamul Islam Jerzy Szpunar
Citations: 2(Details)

Effect of Metallic, Nonmetallic, Water Cooled and Cryogenic Chills on Pearlite Content (PC), Eutectic Cell Count (ECC) and Grain Size (GS) of Hypo Eutectic Nickel Alloyed Cast Iron ,MNSMS,Vol.7 No.1, 2017
Joel Hemanth
Citations: 2(Details)

On The Numerical Solution of Two Dimensional Model of an Alloy Solidification Problem ,MNSMS,Vol.6 No.1, 2016
Moeiz Rouis Khaled Omrani
Citations: 2(Details)

Immersive 3D Visualization of the Collective Behavior of Particles and Crystal Dislocations Using Virtual Reality Technology ,MNSMS,Vol.4 No.3, 2014
Smruti R. Panigrahi Sankar Jayaram Uma Jayaram Hussein M. Zbib Sinisa Dj. Mesarovic
Citations: 2(Details)

Cellular Automata Simulation of Gap-Filler Dissolution during Transient Liquid Phase Bonding of Single Crystal Materials ,MNSMS,Vol.2 No.2, 2012
Adam Ghoneim Olanrewaju Akanbi Ojo
Citations: 1(Details)

Properties of Broadband Non-Linear Lossy Materials Employed in the Electromagnetic Inverse Scattering during the Microchip Processing ,MNSMS,Vol.3 No.3, 2013
Eytan Barouch Stephen L. Knodle Steven A. Orszag
Citations: 1(Details)

Cardiac Energetics in Presence of Lung Assist Devices: In Silico Study ,MNSMS,Vol.6 No.3, 2016
Claudio De Lazzari 1 1 Bernhard Quatember
Citations: 1(Details)

Model for a UV Laser Based Local Polymer Surface Halogenation Process Using a Gaseous Precursor ,MNSMS,Vol.4 No.1, 2014
Simon Kibben
Citations: 1(Details)

Mpulse Breakdown Strength of Nano-ZnO/XLPE Nanocomposite Material on Temperature Rise ,MNSMS,Vol.3 No.1, 2013
Min-Hae Park Kee-Joe Lim
Citations: 1(Details)

The Influence of PbI₂ on Characteristic of Organic-Inorganic Hybrid Perovskite Thin Films ,MNSMS,Vol.7 No.4, 2017
Yuze Peng Yuxiang Wu Linlin Tang Juan Li Jian Xu Yangyang Du Like Huang Hongkun Cai Jian Ni Jianjun Zhang
Citations: 1(Details)

Yb-Decorated Carbon Nanotubes As a Potential Capacity Hydrogen Storage Medium ,MNSMS,Vol.3 No.1, 2013
Hong-Wen Lei Hong Zhang Wei-Dong Wu
Citations: 1(Details)

First Principle Study on the Electric Structure of β-FeSi₂ with Native Point Defects ,MNSMS,Vol.3 No.1, 2013
L.P. Peng A.L. He
Citations: 1(Details)