Journal of Minerals and Materials Characterization and Engineering
ISSN Print:2327-4077
ISSN Online: 2327-4085
Google-based IF: 1.17  Citations h5-index & Ranking*
Top Cited Articles
(666 articles with 11485 citations as of March 2018)

Sort by:
Carbon Nanotube Based Composites- A Review ,JMMCE,Vol.4 No.1, 2005
Rupesh Khare Suryasarathi Bose
Citations: 402(Details)
Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite ,JMMCE,Vol.8 No.6, 2009
Manoj Singla D. Deepak Dwivedi Lakhvir Singh Vikas Chawla
Citations: 351(Details)
Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites ,JMMCE,Vol.9 No.1, 2010
G. B. Veeresh Kumar C. S. P. Rao N. Selvaraj M. S. Bhagyashekar
Citations: 234(Details)
Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review ,JMMCE,Vol.10 No.1, 2011
G. B. Veeresh Kumar C. S. P. Rao N. Selvaraj
Citations: 228(Details)
Characterizing and Modeling Mechanical Properties of Nanocomposites-Review and Evaluation ,JMMCE,Vol.9 No.4, 2010
Hurang Hu Landon Onyebueke Ayo Abatan
Citations: 174(Details)
Carbon Nanotube Reinforced Ceramic Matrix Composites- A Review ,JMMCE,Vol.7 No.4, 2008
Subhranshu Sekhar Samal Smrutisikha Bal
Citations: 139(Details)
Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques ,JMMCE,Vol.10 No.5, 2011
N. Radhika R. Subramanian S. Venkat Prasat
Citations: 127(Details)
Mechanical Properties of Epoxy Resin – Fly Ash Composite ,JMMCE,Vol.9 No.3, 2010
Manoj Singla Vikas Chawla
Citations: 125(Details)
The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems ,JMMCE,Vol.5 No.1, 2006
B. Suresha G. Chandramohan J. N. Prakash V. Balusamy K. Sankaranarayanasamy
Citations: 123(Details)
Synthesis and Characterization of Hydroxyapatite Powder by Sol-Gel Method for Biomedical Application ,JMMCE,Vol.10 No.8, 2011
Khelendra Agrawal Gurbhinder Singh Devendra Puri Satya Prakash
Citations: 117(Details)
MRR Improvement in Sinking Electrical Discharge Machining: A Review ,JMMCE,Vol.9 No.8, 2010
Kuldeep Ojha R. K. Garg K. K. Singh
Citations: 105(Details)
Potential Utilization of Solid Waste (Bagasse Ash) ,JMMCE,Vol.9 No.1, 2010
V. S. Aigbodion S. B. Hassan T. Ause G.B. Nyior
Citations: 99(Details)
Study of Wear Properties of Al-SiC Composites ,JMMCE,Vol.8 No.10, 2009
Manoj Singla Lakhvir Singh Vikas Chawla
Citations: 99(Details)
Review to EDM by Using Water and Powder-Mixed Dielectric Fluid ,JMMCE,Vol.10 No.2, 2011
Sharanjit Singh Arvind Bhardwaj
Citations: 96(Details)
Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach ,JMMCE,Vol.8 No.5, 2009
S. Basavarajappa K.V. Arun J. Paulo Davim
Citations: 89(Details)
Studies on Processing and Characterization of Hydroxyapatite Biomaterials from Different Bio Wastes ,JMMCE,Vol.11 No.1, 2012
Sudip Mondal Biswanath Mondal Apurba Dey Sudit S. Mukhopadhyay
Citations: 88(Details)
Synthesis of Hydroxyapatite Bio-Ceramic Powder by Hydrothermal Method ,JMMCE,Vol.9 No.8, 2010
P. Hui S.L. Meena Gurbhinder Singh R.D. Agarawal Satya Prakash
Citations: 84(Details)
Kinetics of TL Glow Peak of Limestone from Patharia of CG Basin (India) ,JMMCE,Vol.9 No.12, 2010
Vikas Dubey Suryanarayana N.S. Jagjeet Kaur
Citations: 83(Details)
Effect of Particle Size of Filler on Properties of Nylon-6 ,JMMCE,Vol.3 No.1, 2004
Suryasarathi Bose P.A. Mahanwar
Citations: 72(Details)
Recovery of Metals from Aluminum Dross and Saltcake ,JMMCE,Vol.5 No.1, 2006
J.Y. Hwang X. Huang Z. Xu
Citations: 71(Details)
Assessing Mechanical Properties of Natural Fibre Reinforced Composites for Engineering Applications ,JMMCE,Vol.11 No.8, 2012
O. D. Samuel S. Agbo T. A. Adekanye
Citations: 70(Details)
Effect of Particulate Reinforcements on the Mechanical Properties of Al6061-WC and Al6061-Gr MMCs ,JMMCE,Vol.10 No.12, 2011
A. R. K. Swamy A. Ramesha G.B. Veeresh Kumar J. N. Prakash
Citations: 68(Details)
Study of Mechanical Behaviour of Coconut Shell Reinforced Polymer Matrix Composite ,JMMCE,Vol.11 No.8, 2012
Agunsoye J. Olumuyiwa Talabi S. Isaac Sanni O. Samuel
Citations: 67(Details)
Corrosion Behavior of Alumina Reinforced Aluminium (6063) Metal Matrix Composites ,JMMCE,Vol.10 No.12, 2011
K. K. Alaneme M. O. Bodunrin
Citations: 66(Details)
Effect of Heat Treatment on Mechanical Properties and Microstructure of NST 37-2 Steel ,JMMCE,Vol.10 No.3, 2011
D. A. Fadare T. G. Fadara O. Y. Akanbi
Citations: 65(Details)
Sonochemical Coating of Ag-TiO2 Nanoparticles on Textile Fabrics for Stain Repellency and Self-Cleaning- The Indian Scenario: A Review ,JMMCE,Vol.9 No.6, 2010
Subhranshu Sekhar Samal P. Jeyaraman Vinita Vishwakarma
Citations: 63(Details)
Novel Ultrasonic Dispersion of Carbon Nanotubes ,JMMCE,Vol.9 No.3, 2010
G.T. Caneba C. Dutta V. Agrawal M. Rao
Citations: 63(Details)
Sensitisation Study of Normalized 316L Stainless Steel ,JMMCE,Vol.9 No.1, 2010
P. Atanda A. Fatudimu O. Oluwole
Citations: 60(Details)
Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications ,JMMCE,Vol.10 No.14, 2011
M. Asif K. Chandra P.S. Misra
Citations: 60(Details)
Safety and Risk Associated with Nanoparticles - A Review ,JMMCE,Vol.9 No.5, 2010
Vinita Vishwakarma Subhranshu Sekhar Samal N. Manoharan
Citations: 58(Details)
Effect of Heat Treatment Processes on the Mechanical Properties of Medium Carbon Steel ,JMMCE,Vol.11 No.2, 2012
T. Senthilkumar T. K. Ajiboye
Citations: 57(Details)
Characterisation and Corrosion-Erosion Behaviour of Carbide based Thermal Spray Coatings ,JMMCE,Vol.11 No.6, 2012
Sukhpal Singh Chatha Hazoor S. Sidhu Buta S. Sidhu
Citations: 56(Details)
A Review on Mechanical Properties of Natural Fiber Reinforced Hybrid Polymer Composites ,JMMCE,Vol.3 No.5, 2015
K. P. Ashik Ramesh S. Sharma
Citations: 56(Details)
Review of Green Polymer Nanocomposites ,JMMCE,Vol.11 No.4, 2012
Samson O. Adeosun G. I. Lawal Sambo A. Balogun Emmanuel I. Akpan
Citations: 55(Details)
Mechanical Properties of Fly Ash Filled High Density Polyethylene ,JMMCE,Vol.9 No.3, 2010
Iftekhar Ahmad Prakash A. Mahanwar
Citations: 55(Details)
Studies on Mechanical Characterization of Polypropylene/Na+-MMT Nanocomposites ,JMMCE,Vol.9 No.8, 2010
V. Selvakumar K. Palanikumar K. Palanivelu
Citations: 54(Details)
Sigma Phase Formation and Embrittlement of Cast Iron-Chromium-Nickel (Fe-Cr-Ni) Alloys ,JMMCE,Vol.7 No.2, 2008
A. M. Babakr A. Al-Ahmari K. Al-Jumayiah F. Habiby
Citations: 54(Details)
A Review on Detonation Gun Sprayed Coatings ,JMMCE,Vol.11 No.3, 2012
Lakhwinder Singh Vikas Chawla J.S. Grewal
Citations: 51(Details)
Effect of Particle Size and Concentration of Flyash on Properties of Polyester Thermoplastic Elastomer Composites ,JMMCE,Vol.8 No.3, 2009
M.S. Sreekanth V.A. Bambole S.T. Mhaske P.A. Mahanwar
Citations: 50(Details)
Effect of Concentration of Mica on Properties of Polyester Thermoplastic Elastomer Composites ,JMMCE,Vol.8 No.4, 2009
M. S. Sreekanth V. A. Bambole S. T. Mhaske P. A. Mahanwar
Citations: 49(Details)
Characterization of In-Plane Mechanical Properties of Laminated Hybrid Composites ,JMMCE,Vol.9 No.2, 2010
K. G. Satish B. Siddeswarappa K. Mohamed Kaleemulla
Citations: 48(Details)
Evaluation of Mechanical Properties of Medium Carbon Steel Quenched in Water and Oil ,JMMCE,Vol.11 No.9, 2012
J. K. Odusote T. K. Ajiboye A. B. Rabiu
Citations: 48(Details)
Polyetheretherketone (PEEK) Composites Reinforced with Fly Ash and Mica ,JMMCE,Vol.9 No.1, 2010
M. Rahail Parvaiz Smita Mohanty Sanjay K. Nayak P. A. Mahanwar
Citations: 47(Details)
Parametric Optimization of Gas Metal Arc Welding Processes by Using Factorial Design Approach ,JMMCE,Vol.9 No.4, 2010
Manoj Singla Dharminder Singh Dharmpal Deepak
Citations: 45(Details)
Investigating the Effect of Chemical Treatment on the Constituents and Tensile Properties of Sisal Fibre ,JMMCE,Vol.9 No.6, 2010
I.O. Oladele J.A. Omotoyinbo J.O.T. Adewara
Citations: 44(Details)
Effective Beneficiation of Low Grade Iron Ore Through Jigging Operation ,JMMCE,Vol.7 No.1, 2008
B. Das S. Prakash S.K. Das P.S.R. Reddy
Citations: 44(Details)
Surface and Physicochemical Characterization of Phosphates Vivianite, Fe2(PO4)3 and Hydroxyapatite, Ca5(PO4)3OH ,JMMCE,Vol.8 No.8, 2009
D. Luna-Zaragoza E. T. Romero-Guzmán L. R. Reyes-Gutiérrez
Citations: 44(Details)
Growth and Characterisation of Nonlinear Optical Single Crystals of L-Alaninium Oxalate ,JMMCE,Vol.8 No.8, 2009
K. J. Arun S. Jayalekshmi
Citations: 41(Details)
Unburned Carbon from Fly Ash for Mercury Adsorption: II. Adsorption Isotherms and Mechanisms ,JMMCE,Vol.1 No.2, 2002
Z. Li X. Sun J. Luo J. Y. Hwang
Citations: 40(Details)
Influence of Reinforcement Type on Microstructure, Hardness, and Tensile Properties of an Aluminum Alloy Metal Matrix Composite ,JMMCE,Vol.1 No.4, 2013
Belete Sirahbizu Yigezu Manas Mohan Mahapatra Pradeep Kumar Jha
Citations: 40(Details)
Effects of Heat Treatment on the Mechanical Properties of Rolled Medium Carbon Steel ,JMMCE,Vol.9 No.8, 2010
O.O. Daramola B.O. Adewuyi I.O. Oladele
Citations: 39(Details)
A Review of Niobium-Tantalum Separation in Hydrometallurgy ,JMMCE,Vol.10 No.3, 2011
Olushola S. Ayanda Folahan A. Adekola
Citations: 39(Details)
Hot Corrosion & Erosion Problems in Coal Based Power Plants in India and Possible Solutions – A Review ,JMMCE,Vol.10 No.4, 2011
Vikas Chawla Amita Chawla D. Puri S. Prakash Prema G. Gurbuxani Buta Singh Sidhu
Citations: 39(Details)
XPS & FTIR Study of Adsorption Characteristics Using Cationic and Anionic Collectors on Smithsonite ,JMMCE,Vol.5 No.1, 2006
Hosseini S. Hamid Forssberg Eric
Citations: 39(Details)
Processed Low NOx Fly Ash as a Filler in Plastics ,JMMCE,Vol.2 No.1, 2003
X. Huang J.Y. Hwang J.M. Gillis
Citations: 39(Details)
Mineralogy and Geochemistry of A Low Grade Iron Ore Sample from Bellary-Hospet Sector, India and Their Implications on Beneficiation ,JMMCE,Vol.8 No.2, 2009
D. S. Rao T. V. Vijaya Kumar S. Subba Rao S. Prabhakar G. Bhaskar Raju
Citations: 38(Details)
Chemical Leaching of Low Rank Coal and its Characterization using SEM/EDAX and FTIR ,JMMCE,Vol.8 No.10, 2009
B. Manoj A.G. Kunjomana K.A. Chandrasekharan
Citations: 38(Details)
Recent Trends in Producing Ultrafine Grained Steels ,JMMCE,Vol.2 No.5, 2014
Hossam Halfa
Citations: 37(Details)
Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites ,JMMCE,Vol.10 No.10, 2011
Rabindra Behera S. Das D. Chatterjee G. Sutradhar
Citations: 36(Details)
Duplex Stainless Steel Welds and their Susceptibility to Intergranular Corrosion ,JMMCE,Vol.7 No.3, 2008
B. Gideon L. Ward G. Biddle
Citations: 36(Details)
Comparison of the Mechanical Properties of AL6061/Albite and AL6061/Graphite Metal Matrix Composites ,JMMCE,Vol.8 No.2, 2009
A. Ramesh J. N. Prakash A. S. Shiva Shankare Gowda Sonnappa Appaiah
Citations: 35(Details)
Predicting Viscosity of Limestone–Water Slurry ,JMMCE,Vol.8 No.3, 2009
Pradipta Kumar Senapati Dibakar Panda Ashutosh Parida
Citations: 34(Details)
Effect of Hydrochloric Acid on the Structural of Sodic-Bentonite Clay ,JMMCE,Vol.2 No.5, 2014
Samira Bendou Moussa Amrani
Citations: 34(Details)
Influence of SiO2 Fillers on Sliding Wear Resistance and Mechanical Properties of Compression Moulded Glass Epoxy Composites ,JMMCE,Vol.8 No.7, 2009
B. Shivamurthy   Siddaramaiah M.S. Prabhuswamyc
Citations: 33(Details)
Recycling Practices of Spent MgO-C Refractories ,JMMCE,Vol.1 No.2, 2002
Kyei-Sing Kwong James P. Bennett
Citations: 33(Details)
Gold in the Jinya Carlin-type Deposit: Characterization and Implications ,JMMCE,Vol.2 No.2, 2003
Youqin(Joe) Zhou Kuiren Wang
Citations: 33(Details)
Effect of Electrode Materials on Electric Discharge Machining of 316 L and 17 - 4 PH Stainless Steels ,JMMCE,Vol.11 No.7, 2012
Subramanian Gopalakannan Thiagarajan Senthilvelan
Citations: 32(Details)
Wear Behaviour of Al-SiCp Metal Matrix Composites and Optimization Using Taguchi Method and Grey Relational Analysis ,JMMCE,Vol.11 No.11, 2012
Shouvik Ghosh Prasanta Sahoo Goutam Sutradhar
Citations: 31(Details)
Review of Agro Waste Plastic Composites Production ,JMMCE,Vol.1 No.5, 2013
Hammajam Alhaji Abba Ismarrubie Zahari Nur Sapuan Mohd Salit
Citations: 31(Details)
Role of Temperature and Carbon Nanotube Reinforcement on Epoxy based Nanocomposites ,JMMCE,Vol.8 No.1, 2009
Subhranshu Sekhar Samal
Citations: 31(Details)
A Study on Gold(III) Recovery Via Foam Separation with Nonionic Surfactant in Batch Mode ,JMMCE,Vol.2 No.2, 2003
T. Kinoshita S. Akita S. Ozawa S. Nii F. Kawaizumi K. Takahashi
Citations: 30(Details)
Leaching of Sphalerite with Hydrogen Peroxide and Nitric Acid ,JMMCE,Vol.5 No.2, 2006
A.O. Adebayo K.O. Ipinmoroti O.O. Ajayi
Citations: 30(Details)
Sol-Gel-Derived Porous Silica: Economic Synthesis and Characterization ,JMMCE,Vol.11 No.10, 2012
Enobong R. Essien Oluyemi A. Olaniyi Luqman A. Adams Rafiu O. Shaibu
Citations: 30(Details)
Influence of Boron Additions on Mechanical Properties of Carbon Steel ,JMMCE,Vol.11 No.10, 2012
Saeed N. Ghali Hoda S. El-Faramawy Mamdouh M. Eissa
Citations: 30(Details)
Annealing Heat Treatment Effects on Steel Welds ,JMMCE,Vol.9 No.6, 2010
A.V. Adedayo S.A. Ibitoye O.A. Oyetoyan
Citations: 29(Details)
Mechanically Alloyed Carbon Nanotubes (CNT) Reinforced Nanocrystalline AA 4032: Synthesis and Characterization ,JMMCE,Vol.9 No.11, 2010
M.S. Senthil Saravanan S.P. Kumaresh Babu K. Sivaprasad
Citations: 28(Details)
Continuous Recovery of Gold(III) via Foam Separation with Nonionic Surfactant ,JMMCE,Vol.3 No.1, 2004
T. Kinoshita S. Akita S. Ozawa S. Nii F. Kawaizumi K. Takahashi
Citations: 28(Details)
Optical Conductivity and Dielectric Response of an Organic Aminopyridine NLO Single Crystal ,JMMCE,Vol.10 No.13, 2011
T. Arumanayagam P. Murugakoothan
Citations: 28(Details)
Structural, Electrical and Optical Characterization Studies on Glycine Picrate Single Crystal : A Third Order Nonlinear Optical Material ,JMMCE,Vol.8 No.10, 2009
T. Uma Devi N. Lawrence R. Ramesh Babu K. Ramamurthi G. Bhagavannarayana
Citations: 28(Details)
Characterisation and Pre-concentration of Chromite Values from Plant Tailings Using Floatex Density Separator ,JMMCE,Vol.8 No.5, 2009
C. Raghu Kumar Sunil Tripathy D.S. Rao
Citations: 26(Details)
Optimum Calcium Carbonate Filler Concentration for Flexible Polyurethane Foam Composite ,JMMCE,Vol.11 No.3, 2012
M. A. Usman S. O. Adeosun G. O. Osifeso
Citations: 26(Details)
Quantitative Determination of Metallic Iron Content in Steel-Making Slag ,JMMCE,Vol.2 No.1, 2003
Zhiyong Xu Jim Hwang Robert Greenlund Xiaodi Huang Jinjing Luo Steve Anschuetz
Citations: 26(Details)
Studies on L-valinium Picrate Single Crystal: A Promising NLO Crystal ,JMMCE,Vol.8 No.5, 2009
T. Uma Devi N. Lawrence R. Ramesh Babu K. Ramamurthi G. Bhagavannarayana
Citations: 25(Details)
Synthesis and Structural Characterization of Xanthate (KEX) in Sight of Their Utilization in the Processe s of Sulphides Flotation ,JMMCE,Vol.8 No.6, 2009
Nedjar. Zohir Bouhenguel. Mustapha Djebaili Abd Elbaki
Citations: 25(Details)
Characterization and Beneficiation of Anka Chromite Ore Using Magnetic Separation Process ,JMMCE,Vol.6 No.2, 2007
O.K. Abubakre R.A. Muriana P.N. Nwokike
Citations: 25(Details)
Oxygenated Leaching of Copper Sulfide Mineral under Microwave-Hydrothermal Conditions ,JMMCE,Vol.1 No.2, 2002
Jiann-Yang Hwang Shangzhao Shi Zhiyong Xu Xiaodi Huang
Citations: 25(Details)
Dry Sliding Wear Behaviour of Aluminium/Be3Al2(SiO3)6 Composite Using Taguchi Method ,JMMCE,Vol.11 No.7, 2012
H. B. Bhaskar Abdul Sharief
Citations: 25(Details)
Use of Mineral Liberation Analysis (MLA) in the Characterization of Lithium-Bearing Micas ,JMMCE,Vol.1 No.6, 2013
Dirk Sandmann Jens Gutzmer
Citations: 25(Details)
Preparation of Nano-TiO2 Thin Film Using Spin Coating Method ,JMMCE,Vol.1 No.4, 2013
Ayodele Abeeb Daniyan Lasisi Ejibunu Umoru Bankole Olunlade
Citations: 24(Details)
Crystal Growth and Characterization of Potassium Manganese Nickel Sulphate Hexahydrate—A New UV Filter ,JMMCE,Vol.11 No.11, 2012
Vanitha Duraikkan Sultan Asath Bahadur Shunmuganarayanan Athimoolam
Citations: 24(Details)
Characterization of Chromium in Contaminated Soil Studied by SEM, EDS,XRD and Mossbauer Spectroscopy ,JMMCE,Vol.7 No.1, 2008
L. R. Reyes-Gutiérrez E. T. Romero-Guzmán A. Cabral-Prieto R. Rodríguez-Castillo
Citations: 24(Details)
Recovery of Ilmenite and Other Heavy Minerals from Teri Sands (Red Sands) of Tamil Nadu, India ,JMMCE,Vol.8 No.2, 2009
N. Babu N. Vasumathi R. Bhima Rao
Citations: 24(Details)
Upgradation of Low-Grade Siliceous Manganese Ore from Bonai-Keonjhar Belt, Orissa, India ,JMMCE,Vol.8 No.1, 2009
P.P. Mishra B.K. Mohapatra K. Mahanta
Citations: 24(Details)
Effect of Copper and Silicon Carbide Content on the Corrosion Resistance of Al-Mg Alloys in Acidic and Alkaline Solutions ,JMMCE,Vol.11 No.4, 2012
Ahmad T. Mayyas Mohammad M. Hamasha Abdalla Alrashdan Adel M. Hassan Mohammed T. Hayajneh
Citations: 24(Details)
Dissolution Kinetics and Leaching of Rutile Ore in Hydrochloric Acid ,JMMCE,Vol.8 No.10, 2009
Alafara A. Baba Folahan A. Adekola Emmanuela E. Toye Rafiu B. Bale
Citations: 23(Details)
Model for Predictive Analysis of the Quantity of Water Evaporated during the Primary-Stage Processing of Bioceramic Material Sourced from Kaolin ,JMMCE,Vol.9 No.2, 2010
C. I. Nwoye K. Okeke M. C. Obi U. Nwanyanwu G. C. Obasi O. O. Onyemaobi
Citations: 23(Details)
Bio-Chemical Analysis and FTIR-Spectral Studies of Artificially Removed Renal Stone Mineral Constituents ,JMMCE,Vol.8 No.2, 2009
G. Kanchana P. Sundaramoorthi G.P. Jeyanthi
Citations: 23(Details)
Cathodoluminescence (CL) Microscopy Application to Refractories and Slags ,JMMCE,Vol.1 No.1, 2002
Musa Karakus Robert E. Moore
Citations: 23(Details)
Image Analaysis Coupled With A SEM-EDS Applied To The Characaterization Of A Zn-Pb Partially Weathered Ore ,JMMCE,Vol.1 No.1, 2002
Henrique Kahn Eliana S.Mano Mano Maria Manuela M. L. Tassinari
Citations: 22(Details)
Investigation of the Quenching Properties of Selected Media on 6061 Aluminum Alloy ,JMMCE,Vol.8 No.4, 2009
O. K. Abubakre U. P. Mamaki R. A Muriana
Citations: 22(Details)
Morphological, Mechanical, Thermal, Electrical and Rheological Properties of Polycarbonate Composites Reinforced with Surfaces Modified Mica ,JMMCE,Vol.9 No.11, 2010
M. Rahail Parvaiz P. A. Mahanwar Smita Mohanty Sanjay K. Nayak
Citations: 22(Details)
Assessment Of Beneficiation Routes Of Tantalite Ores From Key Locations In Nigeria ,JMMCE,Vol.4 No.2, 2005
A. R Adetunji W.O. Siyanbola I. I Funtua S. O. O. Olusunle A.A Afonja O.O. Adewoye
Citations: 22(Details)
Effects Of Microwave On Molten Metals With Low Melting Temperatures ,JMMCE,Vol.4 No.2, 2005
Xiang Sun Jiann-Yang Hwang Xiaodi Huang Bowen Li Shangzhao Shi
Citations: 22(Details)
Effects of Palm Kernel Shell on the Microstructure and Mechanical Properties of Recycled Polyethylene/Palm Kernel Shell Particulate Composites ,JMMCE,Vol.11 No.8, 2012
Agunsoye J. Olumuyiwa Talabi S. Isaac Obe A. Adewunmi Adamson I. Ololade
Citations: 22(Details)
Synthesis and Characterization of Hydroxyapatite Powder by Eggshell ,JMMCE,Vol.4 No.2, 2016
Himanshu Khandelwal Satya Prakash
Citations: 22(Details)
Effect of Aqueous Extracts of Bitter Leaf Powder on the Corrosion Inhibition of Al-Si Alloy in 0.5 M Caustic Soda Solution ,JMMCE,Vol.11 No.7, 2012
F. A. Ayeni I. A. Madugu P. Sukop A. P. Ihom O. O. Alabi R. Okara M. Abdulwahab
Citations: 21(Details)
A New Application For Flotation Of Oxidized Copper Ore ,JMMCE,Vol.4 No.2, 2005
Recep Ziyadanogullari Firat Aydin
Citations: 21(Details)
Oxidation Behavior of Nanostructured TiAlN and AlCrN Thin Coatings on ASTM-SA213-T-22 Boiler Steel ,JMMCE,Vol.9 No.11, 2010
Vikas Chawla Amita Chawla Buta Singh Sidhu S. Prakash D. Puri
Citations: 21(Details)
Hardening Characteristics of Plain Carbon Steel and Ductile Cast Iron Using Neem Oil as Quenchant ,JMMCE,Vol.10 No.2, 2011
S. B. Hassan J.B. Agboola V.S. Aigbodion E.J. Williams
Citations: 21(Details)
Investigation on Two-Body Abrasive Wear Behavior of Silicon Carbide Filled Glass Fabric-Epoxy Composites ,JMMCE,Vol.9 No.3, 2010
N. Mohan S. Natarajan S.P. KumareshBabu   Siddaramaiah
Citations: 21(Details)
High Temperature Cyclic Oxidation Behavior of Ni and Co Based Superalloys ,JMMCE,Vol.11 No.3, 2012
Deepa Mudgal Surendra Singh Satya Prakash
Citations: 21(Details)
Working Properties of Some Selected Refractory Clay Deposits in South Western Nigeria ,JMMCE,Vol.7 No.3, 2008
J.A. Omotoyinbo O.O. Oluwole
Citations: 21(Details)
A Novel Process For Recovery Of Te And Se From Copper Slimes Autoclave Leach Solution ,JMMCE,Vol.2 No.1, 2003
Shijie Wang Brad Wesstrom Jean Fernandez
Citations: 21(Details)
Investigations on Mechanical and Tribological Behaviour of Particulate Filled Glass Fabric Reinforced Epoxy Composites ,JMMCE,Vol.1 No.4, 2013
Bhadrabasol Revappa Raju Bheemappa Suresha Ragera Parameshwarappa Swamy Bannangadi Swamy Gowda Kanthraju
Citations: 21(Details)
Effect of Silicon Additions on the Wear Properties of Grey Cast Iron ,JMMCE,Vol.1 No.2, 2013
Johnson O. Agunsoye Talabi S. Isaac Olumuyiwa I. Awe Afemefuna T. Onwuegbuzie
Citations: 20(Details)
Effect of Melting Temperature on the Wear Characteristics of Austenitic Manganese Steel ,JMMCE,Vol.7 No.3, 2008
S.A. Balogun D.E. Esezobor J.O. Agunsoye
Citations: 20(Details)
Characterization of Ceramic Filled Polymer Matrix Composite Used for Biomedical Applications ,JMMCE,Vol.10 No.12, 2011
Waleed Asim Hanna Faiza E. Gharib Ismail Ibrahim Marhoon
Citations: 20(Details)
Effect of FCAW Process Parameters on Weld Bead Geometry in Stainless Steel Cladding ,JMMCE,Vol.10 No.9, 2011
V. Vasantha Kumar N. Murugan
Citations: 20(Details)
Alteration Characteristics Of Ilmenites From South India ,JMMCE,Vol.4 No.1, 2005
D. S. Rao T. V. Vijayakumar S. Prabhakar G. Bhaskar Raju T.K. Ghosh
Citations: 20(Details)
Surface Area and Conductivity of Open-Cell Carbon Foams ,JMMCE,Vol.5 No.1, 2006
Adriana M. Druma M. Khairul Alam Calin Druma
Citations: 19(Details)
Effect of Particle Size and Concentration on Mechanical and Electrical Properties of the Mica Filled PVC ,JMMCE,Vol.9 No.9, 2010
S.P. Deshmukh A.C. Rao V. R. Gaval Seena Joseph P.A. Mahanwar
Citations: 19(Details)
The Development of Mathematical Model for the Prediction of Ageing Behaviour for Al-Cu-Mg/Bagasse Ash Particulate Composites ,JMMCE,Vol.9 No.10, 2010
V.S. Aigbodion S.B. Hassan E.T. Dauda R.A. Mohammed
Citations: 19(Details)
Effect of Deformation on the Mechanical and Electrical Properties of Aluminum-Magnesium Alloy ,JMMCE,Vol.10 No.6, 2011
S. O. Adeosun O. I. Sekunowo S.A. Balogun L.O. Osoba
Citations: 19(Details)
Removal of Cu2+ from Aqueous Solution using Fly Ash ,JMMCE,Vol.10 No.6, 2011
Jinjing Luo Huazhen Shen Hanna Markström Zhongye Wang Qiang Niu
Citations: 19(Details)
Preparation & Characterization of Al-5083 Alloy Composites ,JMMCE,Vol.1 No.1, 2013
Sourabh Gargatte Rahul R. Upadhye Venkatesh S. Dandagi Srikanth R. Desai Bhimappa S. Waghamode
Citations: 19(Details)
Beneficiation of Synthetic Iron Ore Kaolinite Mixture Using Selective Flocculation ,JMMCE,Vol.9 No.11, 2010
Lopamudra Panda S.K. Biswal Vilas Tathavadkar
Citations: 19(Details)
Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC Composites ,JMMCE,Vol.10 No.14, 2011
V. Senthilkumar A. Balaji Hafeez Ahamed
Citations: 19(Details)
Comparative Study of the Kinetics of Dissolution of Laterite in some Acidic Media ,JMMCE,Vol.10 No.15, 2011
Olushola S. AYANDA Folahan A. ADEKOLA Alafara A. BABA Olalekan S. FATOKI Bhekumusa J. XIMBA
Citations: 19(Details)
Recovery of Iron Ore Tailings byColumn Flotation ,JMMCE,Vol.1 No.5, 2013
Plinio Eduardo Praes Rodrigo Oscar de Albuquerque Antonio Furquim Oliveira Luz
Citations: 19(Details)
Molybdenite as a Rhenium Carrier: First Results of a Spectroscopic Approach Using Synchrotron Radiation ,JMMCE,Vol.1 No.5, 2013
Teresa Pereira da Silva Maria-Ondina Figueiredo Daniel de Oliveira João Pedro Veiga Maria João Batista
Citations: 19(Details)
To Study the Effect of Austempering Temperature on Fracture Behaviour of Ni-Mo Austempered Ductile Iron (ADI) ,JMMCE,Vol.7 No.4, 2008
Vikas Chawla Uma Batra D. Puri Amita Chawla
Citations: 18(Details)
Investigation of Dissolution Kinetics of A Nigerian Tantalite Ore in Nitric Acid ,JMMCE,Vol.7 No.1, 2008
A. A. Baba F. A. Adekola O. I. Dele-Ige R. B. Bale
Citations: 18(Details)
Taguchi Technique for the Simultaneous Optimization of Tribological Parameters in Metal Matrix Composite ,JMMCE,Vol.10 No.12, 2011
Kumar.T.R. Hemanth R.P. Swamy T.K. Chandrashekar
Citations: 18(Details)
Fracture Toughness of Glass-Carbon (0/90)s Fiber Reinforced Polymer Composite – An Experimental and Numerical Study ,JMMCE,Vol.10 No.8, 2011
P.S. Shivakumar Gouda S.K. Kudari S. Prabhuswamy Dayananda Jawali
Citations: 18(Details)
Degradation Behavior of High Chromium Sodium-Modified A356.0-Type Al-Si-Mg Alloy in Simulated Seawater Environment ,JMMCE,Vol.10 No.6, 2011
M. Abdulwahab I.A. Madugu S.A. Yaro A.P.I. Popoola
Citations: 18(Details)
Microstructure and Mechanical Properties of Ceramic Composites ,JMMCE,Vol.9 No.6, 2010
V.S. Aigbodion J. O. Agunsoye V. Kalu F. Asuke S. Ola
Citations: 17(Details)
Hydrometallurgical Processing of Manganese Ores: A Review ,JMMCE,Vol.2 No.3, 2014
Alafara A. Baba Lateef Ibrahim Folahan A. Adekola Rafiu B. Bale Malay K. Ghosh Abdul R. Sheik Sangita R. Pradhan Olushola S. Ayanda Ismail O. Folorunsho
Citations: 17(Details)
Processing of 5083 Aluminum Alloy Reinforced with Alumina through Microwave Sintering ,JMMCE,Vol.11 No.11, 2012
Jagesvar Verma Anil Kumar Rituraj Chandrakar Rajesh Kumar
Citations: 17(Details)
Preparation and Characterization of Electrically and Thermally Conductive Polymeric Nanocomposites ,JMMCE,Vol.11 No.7, 2012
Mousam Choudhury Smita Mohanty Sanjay K Nayak Rakesh Aphale
Citations: 17(Details)
Fabrication and Characterizations of Mechanical Properties of Al-4.5%Cu/10TiC Composite by In-situ Method ,JMMCE,Vol.11 No.11, 2012
Anand Kumar Manas Mohan Mahapatra Pradeep Kumar Jha
Citations: 16(Details)
Design of a Cantilever - Type Rotating Bending Fatigue Testing Machine ,JMMCE,Vol.10 No.11, 2011
K. K. Alaneme
Citations: 16(Details)
Synthesis, Crystal Growth, Structural, Optical, Thermal and Mechanical Properties of Semiorganic Nonlinear Optical Material: L-Cystine Dihydrochloride ,JMMCE,Vol.9 No.5, 2010
T. Uma Devi N. Lawrence R. Rameshbabu S. Selvanayagam Helen Stoeckli-Evans G. Bhagavannarayana K. Ramamurthi
Citations: 16(Details)
Applied Mineralogical Studies on Iranian Hard Rock Titanium Deposit ,JMMCE,Vol.9 No.3, 2010
A. Mehdilo M. Irannajad
Citations: 16(Details)
Corrosion Behavior of 18/8 Stainless Steel and Nickel-Plated Low Carbon Steel in Cassava Fluid ,JMMCE,Vol.8 No.10, 2009
O.O. Oluwole P.O. Atanda O.A. Odekunbi E. Odegbaju
Citations: 16(Details)
Thermal Sprayed CNT Reinforced Nanocomposite Coatings – A Review ,JMMCE,Vol.10 No.8, 2011
Manoj Kumar Singla Harpreet Singh Vikas Chawla
Citations: 16(Details)
Dry Sliding Wear Behaviour of SiC Particles Reinforced Zinc-Aluminium (ZA43) Alloy Metal Matrix Composites ,JMMCE,Vol.10 No.5, 2011
Rajaneesh N. Marigoudar Kanakuppi Sadashivappa
Citations: 16(Details)
Growth and Structural Characterization of Gadolinium Neodymium Oxalate Crystals Grown in Hydro-Silica Gel ,JMMCE,Vol.9 No.12, 2010
Ignatius Korah Cyriac Joseph M.A. Ittyachen
Citations: 16(Details)
Recovery of Chromite Values from Plant Tailings by Gravity Concentration ,JMMCE,Vol.10 No.1, 2011
Sunil Kumar Tripathy Y. Ramamurthy Veerendra Singh
Citations: 16(Details)
The Effect of Heat Treatment on Titania Slag ,JMMCE,Vol.9 No.9, 2010
S. Samal B.K. Mohapatra P.S. Mukherjee
Citations: 15(Details)
Potentiality of Clay Raw Materials from Northern Morocco in Ceramic Industry: Tetouan and Meknes Areas ,JMMCE,Vol.2 No.3, 2014
M. El Ouahabi L. Daoudi F. De Vleeschouwer R. Bindler N. Fagel 1 1
Citations: 15(Details)
Adsorption of Vapor Phase Mercury on Various Carbons ,JMMCE,Vol.3 No.1, 2004
Jinjing Luo A. M. Hein J.Y. Hwang
Citations: 15(Details)
Thermal Cycling Effects on the Fatigue Behaviour of Low Carbon Steel ,JMMCE,Vol.10 No.14, 2011
Segun Afokhainu Agbadua Chinedum Ogonna Mgbemena Chika Edith Mgbemena Lazarus Onyebuchi Chima
Citations: 15(Details)
The Influence of Agitation Speed on the Morphology and Size Particle Synthesis of Zr(HPO4)2·H2O from Mexican Sand ,JMMCE,Vol.6 No.1, 2007
Garcia Rosales Genoveva Ordónez Regil Enrique Romero Guzmán Elizabeth Teresita Ordónez Regil Eduardo
Citations: 15(Details)
Characterization and Comparison of Corrosion Behavior of Nanostructured TiAlN and AlCrN Coatings on Superfer 800H (INCOLOY 800 H) Substrate ,JMMCE,Vol.8 No.9, 2009
Vikas Chawla D. Puri S. Prakasha Amita Chawla Buta Singh Sidhu
Citations: 15(Details)
Characterization of Solid Wastes from Aluminum Tertiary Sector: The Current State of Spanish Industry ,JMMCE,Vol.3 No.2, 2015
Roberto Galindo Isabel Padilla Olga Rodríguez Ruth Sánchez-Hernández Sol López-Andrés Aurora López-Delgado
Citations: 15(Details)
Effect of Fillers on Mechanical Properties and Fracture Toughness of Glass Fabric Reinforced Epoxy Composites ,JMMCE,Vol.4 No.1, 2016
Basappa Hulugappa Mysuru V. Achutha Bheemappa Suresha
Citations: 15(Details)
Characterization of LDPE Reinforced with Calcium Carbonate—Fly Ash Hybrid Filler ,JMMCE,Vol.2 No.4, 2014
Samson Oluropo Adeosun Mohammed Awwalu Usman Emmanuel Isaac Akpan Winifred Ifeoma Dibie
Citations: 15(Details)
Effect of Titanium Addition on Behavior of Medium Carbon Steel ,JMMCE,Vol.11 No.11, 2012
Hoda S. El-Faramawy Saeed N. Ghali Mamdouh M. Eissa
Citations: 15(Details)
Electrical Properties of Nano-TiO2 Thin Film Using Spin Coating Method ,JMMCE,Vol.2 No.1, 2014
Ayodele Abeeb Daniyan Lasisi Ejibunu Umoru Adeniyi Yisau Fasasi Joseph Olatunde Borode Kunle Michael Oluwasegun Samuel Oloruntoba Olugbenga Olusunle
Citations: 15(Details)
Effect of Heat Treatments on Corrosion of Welded Low-Carbon Steel in Acid and Salt Environments ,JMMCE,Vol.1 No.3, 2013
Saliu Ojo Seidu Bolarinwa Johnson Kutelu
Citations: 14(Details)
Challenges of Producing Quality Construction Steel Bars in West Africa:Case Study of Nigeria Steel Industry ,JMMCE,Vol.8 No.4, 2009
Sanmbo Balogun David Esezobor Samson Adeosun Olatunde Sekunowo
Citations: 14(Details)
Petroleum Coke Particle Size Effects on the Treatment of EAF Dust through Microwave Heating ,JMMCE,Vol.8 No.4, 2009
Xiang Sun Jiann-Yang Hwang Xiaodi Huang Bowen Li
Citations: 14(Details)
Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites ,JMMCE,Vol.11 No.2, 2012
M. Sudheer K. M. Subbaya Dayananda Jawali Thirumaleshwara Bhat
Citations: 14(Details)
Potentials of Maize Stalk Ash as Reinforcement in Polyster Composites ,JMMCE,Vol.11 No.4, 2012
S.B. Hassan E.J. Oghenevweta V.S. Aigbodion
Citations: 14(Details)
Plasma spray fabrication of near-net-shape ceramic objects ,JMMCE,Vol.2 No.2, 2003
Shangzhao Shi Jiann-Yang Hwang
Citations: 14(Details)
Mechanical Behaviour of Duplex Phase Structures in a Medium Carbon Low Alloy Steel ,JMMCE,Vol.9 No.7, 2010
K.K. Alaneme S. Ranganathan T. Mojisola
Citations: 13(Details)
Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel ,JMMCE,Vol.9 No.2, 2010
S. Aribo K.K. Alaneme D.O. Folorunso F.O. Aramide
Citations: 13(Details)
Comparative Analysis of Rigid PVC Foam Reinforced with Class C and Class F Fly Ash ,JMMCE,Vol.2 No.6, 2014
Parisa Khoshnoud Subhashini Gunashekar Murtatha M. Jamel Nidal Abu-Zahra
Citations: 13(Details)
Corrosion of Water Pipes: a Comprehensive Study of Deposits ,JMMCE,Vol.11 No.5, 2012
Vikas Chawla Prema G. Gurbuxani G.R. Bhagure
Citations: 13(Details)
Optimization of ECM Process Parameters Using NSGA-II ,JMMCE,Vol.11 No.10, 2012
Chinnamuthu Senthilkumar Gowrishankar Ganesan Ramanujam Karthikeyan
Citations: 13(Details)
Parameters Affecting the Production of High Carbon Ferromanganese in Closed Submerged Arc Furnace ,JMMCE,Vol.11 No.1, 2012
Mamdouh Eissa Hoda El-Faramawy Azza Ahmed Saeed Nabil Hossam Halfa
Citations: 13(Details)
Leaching of Minerals in Degari Coal ,JMMCE,Vol.5 No.2, 2006
Mohammad Shakirullah Imtiaz Ahmad Mohammad Arsala Khan Mohammad Ishaq Habib ur Rehman Uzma Khan
Citations: 13(Details)
Characterization of Cold Briquetted Iron (CBI)By X-Ray Diffraction Technique ,JMMCE,Vol.7 No.3, 2008
S. A. Ibitoye A. A. Afonja
Citations: 13(Details)
Some Studies on Wear and Corrosion Properties of Al5083/Al2O3/Graphite Hybrid Composites ,JMMCE,Vol.11 No.7, 2012
V. N. Gaitonde S. R. Karnik M. S. Jayaprakash
Citations: 13(Details)
Microstructure and Shape Memory Effect of Cu-Zn-Ni Shape Memory Alloys ,JMMCE,Vol.2 No.2, 2014
Sathish S U. S. Mallik T. N. Raju
Citations: 13(Details)
Characteristics of Biodegradable Implants ,JMMCE,Vol.2 No.2, 2014
Samson Oluropo Adeosun Ganiyu Ishola Lawal Oluwashina Philips Gbenebor
Citations: 13(Details)
Hot Corrosion Behavior of Superalloy in Different Corrosive Environments ,JMMCE,Vol.3 No.1, 2015
Subhash Kamal Korada Viswanath Sharma A. M. Abdul-Rani 1 1
Citations: 12(Details)
Characterization of Cold Briquetted Iron (CBI) By X-Ray Diffraction Technique ,JMMCE,Vol.7 No.1, 2008
S. A. Ibitoye A. A. Afonja
Citations: 12(Details)
Modeling the Drilling Process of Aluminum Composites Using Multiple Regression Analysis and Artificial Neural Networks ,JMMCE,Vol.11 No.10, 2012
Ahmad Mayyas Awni Qasaimeh Khalid Alzoubi Susan Lu Mohammed T. Hayajneh Adel M. Hassan
Citations: 12(Details)
The Effect of Time, Percent of Copper and Nickel on Naturally Aged Al-Cu-Ni Cast Alloys ,JMMCE,Vol.11 No.2, 2012
Mohammad M. Hamasha Ahmad T. Mayyas Adel M. Hassan Mohammed T. Hayajneh
Citations: 12(Details)
Chemical and Mineralogical Characterization of Ghanaian Foundry Slags ,JMMCE,Vol.11 No.2, 2012
A. Andrews E. Gikunoo L. Ofosu-Mensah H. Tofah S. Bansah
Citations: 12(Details)
Growth and Characterization of New Non Linear Optical Bis-Glycine Hydro Bromide (BGHB) Single Crystal ,JMMCE,Vol.11 No.6, 2012
S. Sampthkrishnan N. Balamurugan R. Kumutha Y. Vidyalakshmi S. Muthu
Citations: 12(Details)
Optimization of Carburized UNS G10170 Steel Process Parameters Using Taguchi Approach and Response Surface Model (RSM) ,JMMCE,Vol.2 No.6, 2014
Olawale Samuel Fatoba Olaitan Lukman Akanji Abiodun Samson Aasa
Citations: 12(Details)
Application of Automated Ball Indentation for Property Measurement of Degraded Zr2.5Nb ,JMMCE,Vol.10 No.7, 2011
Kamal Sharma P.K. Singh Vivek Bhasin K.K. Vaze
Citations: 12(Details)
Growth Kinetics and Optical and Mechanical Properties of Glycine Lithium Sulphate (GLS) Crystals ,JMMCE,Vol.9 No.12, 2010
S. Suresh A. Ramanand D. Jayaraman S.M. Navis Priya
Citations: 12(Details)
Study On Application Of Alumina In High-Purity Andalusite Based Refractory ,JMMCE,Vol.3 No.2, 2004
Guihua Liao Keying He Liusheng Li Mingxue Jiang
Citations: 12(Details)
Waste Colored Glasses as Sintering Aid in Ceramic Tiles Production ,JMMCE,Vol.5 No.2, 2006
Jiann-Yang Hwang Xiaodi Huang Adele Garkida Allison Hein
Citations: 12(Details)
Characterization of Egyptian Manganese Ores for Production of High Carbon Ferromanganese ,JMMCE,Vol.1 No.2, 2013
Mohammed Salah Fahim Hoda El Faramawy Azza Mohammed Ahmed Saaed Nabil Ghali Abd El Hakim Taha Kandil
Citations: 12(Details)
Performance of Nanostructured Metal Nitride Coated T-22 Boiler Steel in Na2SO4–60% V2O5 Environment at 900°C under Cyclic Conditions ,JMMCE,Vol.10 No.7, 2011
Vikas Chawla Amita Chawla D. Puri S. Prakash Buta Singh Sidhu
Citations: 11(Details)
Model for Quantitative Analysis of Phosphorus Removed during Leaching of Iron Oxide Ore in Oxalic Acid Solution ,JMMCE,Vol.9 No.4, 2010
C. I. Nwoye C. N. Mbah C. C. Nwakwuo A. I. Ogbonna
Citations: 11(Details)
Growth and Characterization of a New Semi-Organic Nonlinear Optical Crystal: Thiosemicarbazide Cadmium Acetate ,JMMCE,Vol.11 No.3, 2012
K. Selvaraju K. Kirubavathi S. Kumararaman
Citations: 11(Details)
Development of an Environmentally Friendly in-situ Pack-Cyaniding Technique ,JMMCE,Vol.11 No.1, 2012
K. J. Akinluwade A. R. Adetunji M. O. Adeoye L. E. Umoru P. N. Kalu A. T. Taiwo O. O. Adewoye
Citations: 11(Details)
Fluorine Doping Effect in the New Superconducting Y3Ba5Cu8Oy Compound ,JMMCE,Vol.10 No.14, 2011
K. Srinivasan George Thomas C. P. Padaikathan
Citations: 11(Details)
Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy ,JMMCE,Vol.10 No.14, 2011
Z. Hasan R. K. Pandey D.K. Sehgal
Citations: 11(Details)
Growth and Characterization of Non-Linear Optical Material ,JMMCE,Vol.10 No.12, 2011
G.R. Dillip C. Madhukar Reddy B. Deva Prasad Raju
Citations: 11(Details)
Growth and Characterization of Guanidinium Trifluoroacetate – Second Harmonic Generation from a Centrosymmetric Crystal ,JMMCE,Vol.10 No.9, 2011
M. Loganayaki V. Siva Shankar P. Ramesh M.N. Ponnuswamy P. Murugakoothan
Citations: 11(Details)
Development of Fibre Reinforced Cementitious Composite for Ceiling Application ,JMMCE,Vol.8 No.8, 2009
I.O. Oladele A.D. Akinwekomi S. Aribo A.K. Aladenika
Citations: 11(Details)
Finite Element Modeling Of Low Heat Conducting Building Bricks ,JMMCE,Vol.11 No.8, 2012
O. O. Oluwole J. S. Joshua H. O. Nwagwo
Citations: 11(Details)
Characterization of Sintered Ceramic Tiles Produced from Steel Slag ,JMMCE,Vol.11 No.9, 2012
Benneth C. Chukwudi Patrick.O. Ademusuru Boniface A. Okorie
Citations: 11(Details)
The Effect of Ageing Time on Some Mechanical Properties of Aluminum/0.5% Glass Reinforced Particulate Composite ,JMMCE,Vol.11 No.9, 2012
Aondona .P. Ihom Nyior .G. Bem Emmanuel E. Anbua Joy N. Ogbodo
Citations: 11(Details)
Experimental Investigation of Dynamic Characteristics of Multilayer PU Foam Sandwich Panels ,JMMCE,Vol.1 No.5, 2013
Sourabha S. Havaldar Ramesh S. Sharma
Citations: 11(Details)
Evaluation of Corrosion Behaviour of Grey Cast Iron and Low Alloy Steel in Cocoa Liquor and Well Water ,JMMCE,Vol.1 No.2, 2013
John Oluyemi Olawale Jamiu Kolawole Odusote Abuldkarim Baba Rabiu Emmanuel Onazi Ochapa
Citations: 10(Details)
Effects of Gas Metal Arc Welding Techniques on the Mechanical Properties of Duplex Stainless Steel ,JMMCE,Vol.1 No.5, 2013
Tanimu Ibrahim Danjuma S. Yawas Shekarau Y. Aku
Citations: 10(Details)
Effects of Anodizing Parameters in Tartaric-Sulphuric Acid on Coating Thickness and Corrosion Resistance of Al 2024 T3 Alloy ,JMMCE,Vol.3 No.3, 2015
Mohammad Zaki Mubarok   Wahab   Sutarno Soleh Wahyudi
Citations: 10(Details)
Mechanical Properties and Microstructures of Locally Produced Aluminium-Bronze Alloy ,JMMCE,Vol.11 No.10, 2012
Uyime Donatus Joseph Ajibade Omotoyinbo Itopa Monday Momoh
Citations: 10(Details)
Characterization of Ajaokuta Coke for Blast Furnace Ironmaking ,JMMCE,Vol.5 No.2, 2006
A.O. Adeleke R.S. Makan S.A. Ibitoye
Citations: 10(Details)
Corrosion Study of AISI 304, AISI 321 and AISI 430 Stainless Steels in a Tar Sand Digester ,JMMCE,Vol.7 No.4, 2008
L.E. Umoru A.A. Afonja B. Ademodi
Citations: 10(Details)
Lengthening, Cracking and Weldability Problems of Fe–Ni–Cr Alloy Tube ,JMMCE,Vol.8 No.2, 2009
Ali Babakr Fakhruddin Habiby
Citations: 10(Details)
Mineralogical Characterization of Kuru Cassiterite Ore by SEM-EDS,XRD and ICP Techniques ,JMMCE,Vol.10 No.9, 2011
Martin Ogwuegbu Gerald Onyedika Jiann-Yang Hwang Asuwaji Ayuk Zhiwei Peng Bowen Li Ejike E.N.O. Matt Andriese
Citations: 10(Details)
Corrosion Behaviour of Heat Treated Rolled Medium Carbon Steel in Marine Environment ,JMMCE,Vol.10 No.10, 2011
O.O. Daramola B.O. Adewuyi I.O. Oladele
Citations: 10(Details)
Corrosion Behaviour of Modified HVOF Sprayed WC Based Cermet Coatings on Stainless Steel ,JMMCE,Vol.10 No.11, 2011
L.P. Ward B. Hinton D. Gerrard K. Short
Citations: 10(Details)
Optimal Evaluation of Coag-Flocculation Factors for Alum-Brewery Effluent System by Response Surface Methodology ,JMMCE,Vol.11 No.5, 2012
M.C. Menkiti M.C. Aneke E.B. Ogbuene O.D. Onukwuli E.O. Ekumankama
Citations: 10(Details)
Effects of Pressure on the Mechanical Properties and Microstructure of Die Cast Aluminum A380 Alloy ,JMMCE,Vol.2 No.3, 2014
Kenneth N. Obiekea Shekarau Y. Aku Danjuma S. Yawas
Citations: 10(Details)
Effects of Heat Treatment on Strength and Ductility of Rolled and Forged Aluminum 6063 Alloy ,JMMCE,Vol.9 No.8, 2010
S. O. Adeosun S.A. Balogun O.I. Sekunowo M.A. Usman
Citations: 10(Details)
Design of a Diesel Fired Heat-Treatment Furnace ,JMMCE,Vol.9 No.7, 2010
K.K. Alaneme S.O. Olanrewaju
Citations: 10(Details)
Evaluation of the Compressive Strength of Hybrid Clay Bricks ,JMMCE,Vol.10 No.7, 2011
O. Azeez O. Ogundare T.E. Oshodin O.A. Olasupo B.A. Olunlade
Citations: 10(Details)
Development of Iron Based Brake Friction MMC Used for Military Aircraft Application by A New P/M Route ,JMMCE,Vol.10 No.8, 2011
Mohammad Asif K. Chandra P.S. Misra
Citations: 10(Details)
Slurry Erosive Wear Behavior of Plasma Sprayed Inconel-718 Coatings on Al6061 Alloy ,JMMCE,Vol.10 No.5, 2011
C.S. Ramesh Suresh Kumar D.S. Devaraj R. Keshavamurthy
Citations: 10(Details)
Development of NO2 Gas Sensor Based on Plasma Polymerized Nanostructure Polyaniline Thin Film ,JMMCE,Vol.9 No.11, 2010
Rajendra Kumar Sunil Singh A. K. Misra
Citations: 10(Details)
Effect of Silicon Content and Shake-Out Time on Hardness and Grain Size Properties of GL 250 Cast Iron ,JMMCE,Vol.10 No.3, 2011
P. Atanda G. Oluwadare O. Oluwole
Citations: 10(Details)
Influence of Material Condition on the Dry Sliding Wear Behavior of Spring Steels ,JMMCE,Vol.10 No.4, 2011
K. V. Arun K.V. Swetha
Citations: 9(Details)
Synthesis, Structural and Dielectric Properties of Ferroelectric Dichloridoglycine Zinc Dihydrate Single Crystals ,JMMCE,Vol.10 No.4, 2011
S. Suresh A. Ramanand D. Jayaraman S.M. Priya R. Vasanthakumari
Citations: 9(Details)
Quality of Some Nigerian Coals as Blending Stock in Metallurgical Coke Production ,JMMCE,Vol.10 No.1, 2011
M. B. Nasirudeen A. Jauro
Citations: 9(Details)
Oxidation Studies of T-91 and T-22 Boiler Steels in Air at 900°C ,JMMCE,Vol.9 No.8, 2010
Dinesh Gond Vikas Chawla D. Puri S. Prakash
Citations: 9(Details)
Effect of Draw Ratio and Sheet Thickness on Earing and Drawability of Al 1200 Cups ,JMMCE,Vol.9 No.5, 2010
O.O. Oluwole C.O. Anyaeche O.V. Faola
Citations: 9(Details)
Studies on Cold Workability Limits of Brass Using Machine Vision System and its Finite Element Analysis ,JMMCE,Vol.10 No.9, 2011
J. Appa Rao J. Babu Rao Syed Kamaluddin NRMR Bhargava
Citations: 9(Details)
Evaluating the Influence of Ageing Temperature on the Mechanical Properties of Al-Mg-Si Alloy ,JMMCE,Vol.10 No.14, 2011
I.O. Oladele J.A. Omotoyinbo
Citations: 9(Details)
Effect of Changing Environments on Microstructure of HDPE Polymer ,JMMCE,Vol.6 No.1, 2007
S. Bal D. Mahesh T.K. Sen B.C. Ray
Citations: 9(Details)
Adaptable Technologies for Life – Cycle Processing of Tantalum Bearing Minerals ,JMMCE,Vol.6 No.1, 2007
M. O. H. Amuda D. E. Esezobor G. I. Lawal
Citations: 9(Details)
Clay Characterization and Optimisation of Bleaching Parameters for Palm Kernel Oil Using Alkaline Activated Clays ,JMMCE,Vol.2 No.6, 2014
T. O. Salawudeen A. O. Arinkoola M. O. Jimoh B. A. Akinwande
Citations: 9(Details)
Impact of Swelling Indices of Sokoto Clays on the Moulding Properties of the Clays in Sand Mixtures ,JMMCE,Vol.11 No.10, 2012
Ihom A. Paul Suleiman U. Mohammed Nyior G. Bem
Citations: 9(Details)
Pilot Scale Froth Flotation Studies To Upgrade Nigerian Itakpe Sinter Grade Iron Ore To A Midrex-Grade Super-Concentrate ,JMMCE,Vol.8 No.5, 2009
S. A. Ola G.A. Usman A.A. Odunaike S.M. Kollere P.O. Ajiboye A. O. Adeleke
Citations: 9(Details)
Recovery of Iron Bearing Minerals from Beneficiation Plant 2 Thickner Underflow of JSW Steel Limited ,JMMCE,Vol.1 No.2, 2013
Tekkalakote Umadevi Amit Pratap Singh Kumar Abhishek Basavareddy Suresh Rameshwar Sah
Citations: 9(Details)
Comparative Studies on Microstructure and Mechanical Properties of Granulated Blast Furnace Slag and Fly Ash Reinforced AA 2024 Composites ,JMMCE,Vol.2 No.4, 2014
Inampudi Narasimha Murthy Nallabelli Arun Babu Jinugu Babu Rao
Citations: 9(Details)
Physico-Mechanical Responses of Polypropylene-CaCO3 Composite ,JMMCE,Vol.1 No.4, 2013
Samson Oluropo Adeosun Mohammed Awwalu Usman Wasiu Ajibola Ayoola Muyideen Adebayo Bodud
Citations: 9(Details)
Coal Chemistry and Morphology of Thar Reserves,Pakistan ,JMMCE,Vol.11 No.8, 2012
Anila Sarwar M. Nasiruddin Khan Kaniz Fizza Azhar
Citations: 9(Details)
The Influence of Benzophenone Substitution on the Physico-Chemical Characterizations of 8-HydroxyQuinoline NLO Single Crystals ,JMMCE,Vol.11 No.8, 2012
M.J.Jarald Brigit Gilda S. Anbarasu Y. Samson PremAn Devarajan
Citations: 9(Details)
Mechanical Properties of Iron Ore Tailings Filled-Polypropylene Composites ,JMMCE,Vol.11 No.7, 2012
S. M. Adedayo M. A. Onitiri
Citations: 9(Details)
Effect of Cell Size on the Fundamental Natural Frequency of FRP Honeycomb Sandwich Panels ,JMMCE,Vol.11 No.7, 2012
Sourabha S. Havaldar Ramesh S Sharma Arul Prakash M. D. Antony Mohan Bangaru
Citations: 9(Details)
Atmospheric Corrosion Studies of Ductile Iron and Austenitic Stainless Steel in an Extreme Marine Environment ,JMMCE,Vol.11 No.9, 2012
Olasupo Ogundare Babaniyi Babatope Adelana Razaq Adetunji Samuel Olugbenga Oloruntoba Olusunle
Citations: 9(Details)
Corrosion Behavior of Cu-Zn-Ni Shape Memory Alloys ,JMMCE,Vol.1 No.2, 2013
S. Sathish U. S. Mallik T. N. Raju
Citations: 8(Details)
Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Fabric Reinforced Epoxy Composites ,JMMCE,Vol.1 No.3, 2013
Bhadrabasol Revappa Raju Bheemappa Suresha Ragera Parameshwarappa Swamy Bannangadi Swamy Gowda Kanthraju
Citations: 8(Details)
Theoretical and Experimental Analysis of Deep Drawing Cylindrical Cup ,JMMCE,Vol.1 No.6, 2013
Najmeddin Arab Abotaleb Javadimanesh
Citations: 8(Details)
Tensile Properties and Fractographic Analysis of Low Density Polyethylene Composites Reinforced with Chemically Modified Keratin-Based Biofibres ,JMMCE,Vol.3 No.4, 2015
Isiaka Oluwole Oladele 1 1 Jimmy Lolu Olajide Okikiola Ganiyu Agbabiaka Olawale Opeyemi Akinwumi
Citations: 8(Details)
Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiCP Metal Matrix Composite ,JMMCE,Vol.2 No.1, 2014
Serajul Haque Prem Kumar Bharti Akhtar Hussain Ansari
Citations: 8(Details)
Effects of Additives on Some Selected Properties of Base Sand ,JMMCE,Vol.2 No.5, 2014
Saliu Ojo Seidu Bolarinwa Johnson Kutelu
Citations: 8(Details)
Physico-Chemical Characterization of Akoko Mined Kaolin Clay ,JMMCE,Vol.3 No.5, 2015
Abimbola George Olaremu
Citations: 8(Details)
Comparative Kinetics of Iron Ore Dissolution in Aqueous HCl-HNO3 System ,JMMCE,Vol.1 No.4, 2013
Onyedika Gerald Nwoko Christopher Oguarah Ayebatonworio Ogwuegbu Martin
Citations: 8(Details)
Characterization of Ilmenite from Kerala Coastline, India:Implications in the Production of Synthetic Rutile ,JMMCE,Vol.8 No.6, 2009
M. Sundararajan K.H. Bhat S. Velusamy N. Babu M.E.K. Janaki S. Sasibhooshanan P.N. Mohan Das
Citations: 8(Details)
Plane Strain Fracture Behaviour of Fabric Reinforced Hybrid Composites under varied Notch Configurations ,JMMCE,Vol.8 No.6, 2009
K. Mohamed Kaleemulla B. Siddeswarappa
Citations: 8(Details)
Characterization of Opaques off Konkan Coast Maharashtra, Central West Coast of India ,JMMCE,Vol.6 No.1, 2007
A.R Gujar N Angusamy G. V. Rajamanickam
Citations: 8(Details)
Effect of Magnesium and Calcium as Spheroidizers on the Graphite Morphology in Ductile Cast Iron ,JMMCE,Vol.6 No.1, 2007
O.O Oluwole O.E. Olorunniwo O.O. Ogundare P.O. Atanda O.O Oridota
Citations: 8(Details)
Finite Element Modeling of Heat Transfer in Salt Bath Furnaces ,JMMCE,Vol.8 No.3, 2009
O.O. Oluwole P.O. Atanda B.I. Imasogie
Citations: 8(Details)
Thermodynamics of the Reduction Roasting of Nickeliferous Laterite Ores ,JMMCE,Vol.4 No.6, 2016
R. Elliott C. A. Pickles J. Forster
Citations: 8(Details)
Prediction of Weld Bead Geometry in Plasma Arc Welding using Factorial Design Approach ,JMMCE,Vol.10 No.10, 2011
K. Siva Prasad Ch.Srinivasa Rao D.Nageswara Rao
Citations: 8(Details)
Structural and Optical Characterization Studies on 2, 4- dinitrophenylhydrazine Single Crystal ,JMMCE,Vol.9 No.4, 2010
T. Uma Devi N. Lawrence R. Ramesh Babu K. Ramamurthi G. Bhagavannarayana
Citations: 8(Details)
Studies on Weldability of Powder-Processed Fe-0.35P-0.15C Alloy Using Gas Tungsten Arc Welding Process ,JMMCE,Vol.9 No.3, 2010
Yashwant Mehta Shefali Trivedi K. Chandra P.S. Mishra
Citations: 8(Details)
Fabrication and Investigation of Damping Properties of Nano Particulate Composites ,JMMCE,Vol.9 No.9, 2010
K. S. Umashankar K. V. Gangadharan Vijay Desai B. Shivamurthy
Citations: 8(Details)
Determination of Bond index of Birnin- Gwari Iron Ore in Nigeria ,JMMCE,Vol.9 No.7, 2010
K.J. Olatunji A.G. Durojaiye
Citations: 8(Details)
Optimizing Utilization of Petroleum Coke in Nigerian Metallurgical Industry ,JMMCE,Vol.10 No.3, 2011
E.J. Akpabio O.W. Obot
Citations: 8(Details)
Corrosion Resistance of Heat-Treated NST 37-2 Steel in Hydrochloric Acid Solution ,JMMCE,Vol.1 No.1, 2013
David Abimbola Fadare Taiwo Gbolarumi Fadara
Citations: 8(Details)
Corrosion Behaviour of Al6061-Frit Particulate Metal Matrix Composites in Sodium Chloride Solution ,JMMCE,Vol.1 No.1, 2013
Dasappa Ramesh Ragera Parameshwarappa Swamy Tumkur Krishnamurthy Chandrashekar
Citations: 7(Details)
Study on Corrosion Behavior of Pearlitic Rail Steel ,JMMCE,Vol.10 No.7, 2011
S. Samal A. Bhattaacharyya S.K. Mitra
Citations: 7(Details)
Tensile Strength of Squeeze Cast Carbon Fibers Reinforced Al-Si Matrix Composites ,JMMCE,Vol.10 No.2, 2011
Ahmed A. Moosa Kahtan K. Al-Khazraji Osama S. Muhammed
Citations: 7(Details)
Improvement of High Temperature Wear Resistance of AISI 316 ASS through NiCrBSiCFe Plasma Spray Coating ,JMMCE,Vol.9 No.7, 2010
N. L . Parthasarathi Muthukannan Duraiselvam
Citations: 7(Details)
Microstructural Study of Heat Treated Chromium Alloyed Grey Cast Iron ,JMMCE,Vol.9 No.3, 2010
P. Atanda A. Okeowo O. Oluwole
Citations: 7(Details)
Influence of Picric Acid on the SHG Efficiency of L-Prolinium Tartrate Crystals ,JMMCE,Vol.10 No.10, 2011
S. Natarajan K. Moovendaran J. Kalyana Sundar G. Bhagavannarayana S.A. Martin Britto Dhas
Citations: 7(Details)
Thermal, Hardness and Microstructural Characterization of Al-Si-SiCp Composites ,JMMCE,Vol.11 No.2, 2012
O. A. Alo L. E. Umoru J. A. Ajao K. M. Oluwasegun
Citations: 7(Details)
Role of Heat Treatment on Al6061- Frit Particulate Composites ,JMMCE,Vol.11 No.4, 2012
D. Ramesh R.P. Swamy T.K. Chandrashekar
Citations: 7(Details)
Elastic Properties of Clinopyroxene Based Glasses along Diopside (CaMgSi2O6)-Jadeite (NaAlSi2O6) Join ,JMMCE,Vol.11 No.3, 2012
Rinkel Jindal Widiya Jatmiko Indra Vir Singh R. Jayaganthan
Citations: 7(Details)
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route ,JMMCE,Vol.11 No.5, 2012
S. Jerome S. Govind Bhalchandra S.P. Kumaresh Babu B. Ravisankar
Citations: 7(Details)
Performance Assessment of Selected Nigerian Vegetable Oils as Quenching Media in Hardening Process for Medium Carbon Steel ,JMMCE,Vol.3 No.2, 2015
Joseph Babalola Agboola Oladiran Abubakre Kamardeen Edeki Mudiare Michael Bolaji Adeyemi Samuel Ayo Afolabi
Citations: 7(Details)
Assessment of Some Nigerian Coals for Metallurgical Application ,JMMCE,Vol.7 No.4, 2008
I. O. Akpabio M. M. Chagga A. Jauro
Citations: 7(Details)
Characterization and Modification of a Clay Mineral Used in Adsorption Tests ,JMMCE,Vol.3 No.4, 2015
Natália Costa Dias Patrícia Arns Steiner Maria Cristina Borba Braga
Citations: 7(Details)
Thermal Conductivity Enhancement of Epoxy by Hybrid Particulate Fillers of Graphite and Silicon Carbide ,JMMCE,Vol.3 No.2, 2015
Krishnamachar Srinivas Mysore Siddalingappa Bhagyashekar
Citations: 7(Details)
Progress in Preparation and Application of Fabric Electrodes ,JMMCE,Vol.2 No.6, 2014
Yunqi Zhai Xiaoxia Liu Ya Wang Xiao Li
Citations: 7(Details)
Effect of Magnesium on the Mechanical and Bioactive Properties of Biphasic Calcium Phosphate ,JMMCE,Vol.11 No.10, 2012
Ponnusamy Kanchana Chinnathambi Sekar
Citations: 7(Details)
FEM Simulation and Experimental Validation of Cold Forging Behavior of LM6 Base Metal Matrix Composites ,JMMCE,Vol.11 No.10, 2012
Hillol Joardar Goutam Sutradhar Nitai Sundar Das
Citations: 7(Details)
Iron Ore Beneficiation with Packed Column Jig ,JMMCE,Vol.2 No.1, 2003
D.C. Yang P. Bozzato G. Ferrara
Citations: 7(Details)
Study on Factors Effecting Weld Pool Geometry of Pulsed Current Micro Plasma Arc Welded AISI 304L Austenitic Stainless Steel Sheets Using Statistical Approach ,JMMCE,Vol.11 No.8, 2012
Kondapalli Siva Prasad Chalamalasetti Srinivasa Rao Damera Nageswara Rao
Citations: 7(Details)
Effect of Groundnut Shell Powder on the Mechanical Properties of Recycled Polyethylene and Its Biodegradability ,JMMCE,Vol.4 No.3, 2016
Mohammed Awwalu Usman Ibrahim Momohjimoh Abdulahi S. B. Gimba
Citations: 7(Details)
Studies on Mechanical and Wear Properties of Al6061/Beryl Composites ,JMMCE,Vol.11 No.7, 2012
Reddappa Hosur Reddappa Kitakanur Ramareddy Suresh Hollakere Basavaraj Niranjan Kestur Gundappa Satyanarayana
Citations: 7(Details)
Effect of Surface Treatment on Tribological Behavior of Ti-6Al-4V Implant Alloy ,JMMCE,Vol.11 No.7, 2012
B. K. C. Ganesh N. Ramanaiah P. V. Chandrasekhar Rao
Citations: 6(Details)
Fabrication of End Quenched Machine: Hardenability Evaluation ,JMMCE,Vol.2 No.2, 2014
A. A. Yekinni J. O. Agunsoye S. A. Bello I. O. Awe S. I. Talabi
Citations: 6(Details)
Effect of Particulate Reinforcement on the Mechanical Properties of Al2024-WC MMCs ,JMMCE,Vol.3 No.6, 2015
K. Punith Gowda J. N. Prakash Shivashankare Gowda B. Satish Babu
Citations: 6(Details)
Effect of Toluene and Dioctylphthalate on the Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid ,JMMCE,Vol.2 No.1, 2014
Mohammed Adamu Lasisi Ejibunu Umoru Oladeji Oluremi Ige
Citations: 6(Details)
Effect of Normalizing and Hardening on Mechanical Properties of Spring ,JMMCE,Vol.11 No.8, 2012
O. R. Adetunji P. O. Aiyedun S. O. Ismaila M. J. Alao
Citations: 6(Details)
Physico-Chemical Characterization of Novel Epoxy Matrix System Reinforced with Recycled Short Milled Carbon Fibre ,JMMCE,Vol.3 No.5, 2015
Sagar T. Cholake Grainne Moran Yu Bai R. K. Singh Raman 1 1 X. L. Zhao Sami Rizkalla Sri Bandyopadhyay
Citations: 6(Details)
Predictability of Al-Mn Alloy Exposure Time Based on Its As-Cast Weight and Corrosion Rate in Sea Water Environment ,JMMCE,Vol.1 No.6, 2013
Chukwuka Nwoye Simeon Neife Ebere Ameh Awo Nwobasi Ndubuisi Idenyi
Citations: 6(Details)
Separation Behaviour of Iron Ore Fines in Kelsey Centrifugal Jig ,JMMCE,Vol.1 No.3, 2013
Nirlipta P. Nayak Bhatu K. Pal
Citations: 6(Details)
Investigation of Sida acuta (Wire Weed) Plant Extract as Corrosion Inhibitor for Aluminium-Copper-Magnessium Alloy in Acidic Medium ,JMMCE,Vol.2 No.4, 2014
Fatai Afolabi Ayeni Saheed Alawode Dorcas Joseph Patrick Sukop Victoria Olawuyi Temitope Emmanuel Alonge Oladuuni Oyelola Alabi Oluwakayode Oluwabunmi Francis Ireti Alo
Citations: 6(Details)
Mineralogy of Iron Ores of Different Alumina Levels from Singhbhum Belt and Their Implication on Sintering Process ,JMMCE,Vol.3 No.3, 2015
Moni Sinha Sri Harsha Nistala Sanjay Chandra Tilak Raj Mankhand
Citations: 6(Details)
Re-Evaluation of Bovine Fiber Biomass as Exploitable Keratinous Bio-Resource for Biomedical and Industrial Applications ,JMMCE,Vol.5 No.1, 2017
Isiaka Oluwole Oladele Jimmy Lolu Olajide Oluyemi Ojo Daramola Kofi Bismarck Siaw
Citations: 6(Details)
Evaluation and Optimization of Tensile Strength Responses of Coir Fibres Reinforced Polyester Matrix Composites (CFRP) Using Taguchi Robust Design ,JMMCE,Vol.3 No.4, 2015
Ugochukwu Chuka Okonkwo Christian Ebele Chukwunyelu Bright Uchenna Oweziem Austine Ekuase
Citations: 6(Details)
Preparation of Al-5Ti Master Alloys for the In-Situ Processing of Al-TiC Metal Matrix Composites ,JMMCE,Vol.8 No.7, 2009
Satish Babu Boppana K . Chennakeshavalu
Citations: 6(Details)
Model for Assessment Evaluation of Methane Gas Yield Based on Hydraulic Retention Time during Fruit Wastes Biodigestion ,JMMCE,Vol.11 No.10, 2012
Chukwuka Nwoye Asuke Ferdinand Ijomah Agatha Obiorah Samuelmary
Citations: 6(Details)
Model for Predictive Analysis of Heat Absorbed by Oxalic Acid Solution Relative to the Solution Temperature during Leaching of Iron Oxide Ore ,JMMCE,Vol.8 No.7, 2009
C. I. Nwoye C. S. Nwobodo C. Nlebedim U.C. Nwoye R. A. Umana G. C. Obasi
Citations: 6(Details)
Exploring the Potentials of Tailings of Bukuru Cassiterite Deposit for the Production of Iron Ore Pellets ,JMMCE,Vol.8 No.5, 2009
O. K. Abubakre Y. O. Sule R. A. Muriana
Citations: 6(Details)
Study on Effect of Welding Speed on Micro Structure and Mechanical Properties of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets ,JMMCE,Vol.11 No.10, 2012
Chalamalasetti Srinivasa Rao Kondapalli Siva Prasad Damera Nageswara Rao
Citations: 6(Details)
Nucleation of Fe-Rich Intermetallic Phases on α-Al2O3 Oxide Films in Al-Si Alloys ,JMMCE,Vol.3 No.1, 2015
Pilar Orozco-González Manuel Castro-Román Simitrio Maldonado-Ruíz Sergio Haro-Rodríguez Fabián Equihua-Guillén Rodrigo Muñiz-Valdez Salvador Luna-Álvarez Miguel Montoya-Dávila Alejandra Hernández-Rodríguez
Citations: 6(Details)
Secondary Recovery of Columbite from Tailing Dump in Nigerian Jos Mines Field ,JMMCE,Vol.11 No.6, 2012
F.A Ayeni I. A Madugu P. Sukop S. A Ibitoye A. A. Adeleke M Abdulwahab
Citations: 6(Details)
Progress on Fabric Electrodes Used in Biological Signal Acquisition ,JMMCE,Vol.3 No.3, 2015
Zhen Liu Xiaoxia Liu
Citations: 6(Details)
Study on Weld Quality Characteristics of Pulsed Current Micro Plasma Arc Welding of Inconel625 Sheets ,JMMCE,Vol.11 No.2, 2012
K. Siva Prasad Ch.Srinivasa Rao D.Nageswara Rao
Citations: 6(Details)
Potential of Tin Tailings an Industrial Waste for Refractory Materials ,JMMCE,Vol.9 No.2, 2010
V.S. Aigbodion A. AbdulRasheed S.O. Olajide J.O. Agunsoye I.Y. Sulaiman
Citations: 6(Details)
Some Preliminary Metallurgical Studies on Grain Size and Density of Work Material used in Micro Turning Operation ,JMMCE,Vol.9 No.9, 2010
A. S. Patil H. K. Dave R. Balasubramaniam K. P. Desai H. K. Raval
Citations: 6(Details)
Corrosion Characteristics of Ascast Ductile Iron in Lime Juice ,JMMCE,Vol.9 No.10, 2010
F.O. Aramide E.O. Olorunniwo P.O. Atanda J.O. Borode
Citations: 6(Details)
Nitriding of Medium Carbon Ferromanganese Alloy in Gas Solid Reaction ,JMMCE,Vol.10 No.4, 2011
Saeed N. Ghali
Citations: 6(Details)
Corrosion Behavior of Mild Steel and SS 304L in Presence of Dissolved Copper ,JMMCE,Vol.9 No.12, 2010
M. Mobin Hina Shabnam
Citations: 6(Details)
Growth and Characterization of L-glutamic Acid Hydro Chloro Bromide,A New Nonlinear Optical Material ,JMMCE,Vol.10 No.1, 2011
S. Kumararaman K. Kirubavathi K. Selvaraju
Citations: 6(Details)
Influence of Mould Heat Storage Capacity on Properties of Grey Iron ,JMMCE,Vol.10 No.4, 2011
A.V. Adedayo B. Aremo
Citations: 6(Details)
Development Processes of Globular Microstructure ,JMMCE,Vol.10 No.7, 2011
A.V. Adedayo
Citations: 6(Details)
Growth of Pure and Mo Doped Potassium Titanyl Phosphate (KTP) Crystals:Influence of KTP/Flux Ratios on the Growth Morphology ,JMMCE,Vol.10 No.8, 2011
J. Rajeev Gandhi B. Vijayalakshmi M. Rathnakumari P. Sureshkumar
Citations: 6(Details)
Finite Elements in the Solution of Continuum Field Problems ,JMMCE,Vol.9 No.5, 2010
Chukwutoo Christopher Ihueze
Citations: 5(Details)
The Effects of Firing Temperatures on the Performance of Insulating Firebricks Containing Different Proportions of Alumina and Sawdust ,JMMCE,Vol.3 No.4, 2015
Davies Oladayo Folorunso 1 1 Fatai Olufemi Aramide 1 1 Peter Olubambi 1 1 1 1 Joseph Olatunde Borode 1 1
Citations: 5(Details)
Influence of Nano-Modification on the Interlaminar Shear Strength of Unidirectional Glass Fiber-Reinforced Epoxy Resin ,JMMCE,Vol.2 No.4, 2014
M. Rajanish N. V. Nanjundaradhya Ramesh S. Sharma
Citations: 5(Details)
Development and Calibration of a Quantitative, Automated Mineralogical Assessment Method Based on SEM-EDS and Image Analysis: Application for Fine Tailings ,JMMCE,Vol.10 No.12, 2011
R. Mermillod-Blondin M. Benzaazoua M. Kongolo P. de Donato B. Bussière P. Marion
Citations: 5(Details)
Study the Effect of Polymeric Quenching on Wear Resistance of Eutectic Modified Aluminium – Silicon Alloy ,JMMCE,Vol.10 No.10, 2011
Kahtan K. Al-Khazraji Waleed A. Hanna Osama S. Muhammed
Citations: 5(Details)
Characterization and Corrosion Behavior of Plasma Sprayed Pure and Reinforced HA Coatings in Simulated Body Fluid ,JMMCE,Vol.10 No.9, 2011
Gurbhinder Singh Surendra Singh Satya Prakash
Citations: 5(Details)
Comparative Study of Corrosion Sensitivity of Selected Ferrous Metals in Crude Oil ,JMMCE,Vol.11 No.6, 2012
O. Ogundare I.M. Momoh O.J. Akinribide A.R. Adetunji J.O. Borode S.O.O. Olusunle O.O. Adewoye
Citations: 5(Details)
Effects of Alkaline Additives on the Thermal Behavior and Properties of Cameroonian Poorly Fluxing Clay Ceramics ,JMMCE,Vol.2 No.5, 2014
Antoine Elimbi Joseph M. Dika Chantale N. Djangang
Citations: 5(Details)
Industrial Potentiality of Alluvial Clays Deposits from Cameroon: Influence of Lateritic Clayey Admixture for Fired Bricks Production ,JMMCE,Vol.1 No.5, 2013
Aubin Nzeugang Nzeukou Véronique Kabeyene Kamgang Robert Eko Medjo Uphie Chinje Melo André Njoya Patrick Ninla Lemougna Nathalie Fagel
Citations: 5(Details)
Corrosion Characteristics of As-Cast Aluminium Bronze Alloy in Selected Aggressive Media ,JMMCE,Vol.1 No.5, 2013
Bukola Joseph Babalola Michael Oluwatosin Bodunrin Joseph Olatunde Borode Kenneth Kanayo Alaneme
Citations: 5(Details)
Effect of Surface Treatment and Fiber Orientation on the Tensile and Morphological Properties of Banana Stem Fiber Reinforced Natural Rubber Composite ,JMMCE,Vol.2 No.3, 2014
Ikechukwu Christian Ezema A. R. Ravindranatha Menon Camelus Sunday Obayi Augustin Dinobi Omah
Citations: 5(Details)
The Effect of Sulfurization Process on Flotation of Copper Ore Containing Gold and Silver ,JMMCE,Vol.7 No.3, 2008
Ibrahim TEGIN Recep ZIYADANOGULLARI
Citations: 5(Details)
Amaranthus cordatus as a Green Corrosion Inhibitor for Mild Steel in H2SO4 and NaCl ,JMMCE,Vol.2 No.3, 2014
Michael O. Nwankwo Peter O. Offor Simeon I. Neife Lucky C. Oshionwu Ndubuisi E. Idenyi
Citations: 5(Details)
Study on Natural Minerals Applying in Developing New Health Textiles ,JMMCE,Vol.3 No.4, 2015
Xiaohong Shen Xiangji Wu Hailing Wei Weiping Du
Citations: 5(Details)
Enhancement of Dimensional Stability of Rigid PVC Foams Using E-Glass Fibers ,JMMCE,Vol.3 No.2, 2015
Murtatha M. Jamel Parisa Khoshnoud Subhashini Gunashekar Nidal Abu-Zahra
Citations: 5(Details)
Model for the Calculation of the Concentration of Dissolved Hematite during Hydrogen Peroxide Leaching of Iron Oxide Ore ,JMMCE,Vol.8 No.5, 2009
C. I. Nwoye C. C. Nwakwuo C. Nlebedim U.C. Nwoye R. A. Umana G. C. Obasi
Citations: 5(Details)
Effect of Chromium on the Mechanical Properties of Powder-Processed Fe-0.35 wt% P Alloys ,JMMCE,Vol.8 No.8, 2009
Shefali Trivedi Yashwant Mehta K. Chandra P.S. Mishra P.S. Mishra
Citations: 5(Details)
Vinyl Acetate-Acrylic Acid Copolymer for Enhanced Oil Recovery ,JMMCE,Vol.1 No.2, 2002
Gerard T. Caneba Jay Axland
Citations: 5(Details)
Microwave Assisted Liberation of High Phosphorus Oolitic Iron Ore ,JMMCE,Vol.2 No.5, 2014
Mamdouh Omran Timo Fabritius Nagui Abdel-Khalek Mortada El-Aref Abd El-Hamid Elmanawi Mahmoud Nasr Ahmed Elmahdy
Citations: 5(Details)
Mineralogical Characterization of Sieved and Un-Sieved Samples ,JMMCE,Vol.2 No.1, 2014
Rolando Lastra William Petruk
Citations: 5(Details)
Statistical Analysis for the Abrasive Wear Behavior of Al 6061 ,JMMCE,Vol.2 No.4, 2014
Mohd Shadab Khan Zahir Hasan Yaqoob Ali Ansari
Citations: 5(Details)
Evaluation of the Refractory Properties of Nigerian Ozanagogo Clay Deposit ,JMMCE,Vol.1 No.6, 2013
Alexander Asanja Jock Fatai Afolabi Ayeni Abdulkarin Salawu Ahmed Umar Adeiza Sullayman
Citations: 5(Details)
Recovery of Iron Values from Waste Manganiferous Iron Ore Fines for Pellet Making ,JMMCE,Vol.2 No.5, 2014
Shobhana Dey Manoj Kumar Mohanta Manik Chand Goswami Santosh Pani
Citations: 5(Details)
Mechanical Property Estimation of Similar Weld using Ball Indentation Technique ,JMMCE,Vol.11 No.11, 2012
Harshit Kumar Khandelwal Kamal Sharma Rahul Chhibber
Citations: 5(Details)
Polymer in Sustainable Energy ,JMMCE,Vol.11 No.7, 2012
Darshan Patel S. P. Deshmukh
Citations: 5(Details)
Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings ,JMMCE,Vol.3 No.2, 2015
Ezenwanyi Fidelia Ochulor Samson Oluropo Adeosun Mohammed Olawale Hakeem Amuda Sanmbo Adewale Balogun
Citations: 4(Details)
Growth and Characterization of β-Alanine Oxalate—A New Organic Single Crystal ,JMMCE,Vol.11 No.11, 2012
S. Lincy Mary Ponmani P. Selvarajan N. Balasundari D. Jencylin
Citations: 4(Details)
Drilling of TiO2 and Zns Filled Gfrp Composites ,JMMCE,Vol.11 No.8, 2012
K. V. Arun D. Sujay Kumar M. C. Murugesh
Citations: 4(Details)
Enhancement of Insulating Refractory Properties of Selected Nigeria Fire-Clays Using Coconut Shell ,JMMCE,Vol.3 No.6, 2015
Eugenia Obiageli Obidiegwu David Ehigie Esezobor Johnson Olumuyiwa Agunsoye Ganiyu Ishola Lawal
Citations: 4(Details)
The Effect of MgO Dopant and Laser Treatment on ZnO Ceramic ,JMMCE,Vol.1 No.6, 2013
Fadhil A. Chyad Shaymaa Q. Abul Hassan Zyad T. Al-Dahan
Citations: 4(Details)
Studies on Extraction Behaviour of Cobalt(II) with Nitrobenzoylprazolone-5 ,JMMCE,Vol.1 No.3, 2013
Onyedika Gerald Arinze Judith Ogwuegbu Martin
Citations: 4(Details)
Evaluation of Cost Effectiveness of Onibode Fire-Clay for Production of High Quality Refractory Bricks ,JMMCE,Vol.3 No.5, 2015
David Ehigie Esezobor Friday Ichifu Apeh Mfon Okon Udo Mustapha Fabiyi Enebi Solomon Apeh
Citations: 4(Details)
Application of Hooke & Jeeves Algorithm in Optimizing Fusion Zone Grain Size and Hardness of Pulsed Current Micro Plasma Arc Welded AISI 304L Sheets ,JMMCE,Vol.11 No.9, 2012
Kondapalli Siva Prasad Chalamalasetti Srinivasa Rao Damera Nageswara Rao
Citations: 4(Details)
Effect of Surface Modification on Candidate Alloys for Canadian SCWR Fuel Cladding ,JMMCE,Vol.2 No.2, 2014
Jian Li Pei Liu Renata Zavadil Tom Malis Sami Penttilä
Citations: 4(Details)
Growth and Characterization Studies of MnHP Single Crystal in Silica Gel Medium ,JMMCE,Vol.8 No.5, 2009
P. Suresh G. Kanchana P. Sundaramoorthi
Citations: 4(Details)
Metallurgical Use of Heat Altered Coal: A Case Study ,JMMCE,Vol.8 No.7, 2009
Debjani Nag A.K. Singh P.K. Banerjee
Citations: 4(Details)
Effect of Chromium on the Corrosion Behavior of Powder-Processed Fe-0.35 wt % P Alloys ,JMMCE,Vol.8 No.7, 2009
Yashwant Mehta Shefali Trivedi K. Chandra P.S. Mishra
Citations: 4(Details)
Physico-Chemical Characterization and Speciation of Sulphur of Nigerian Coal Samples ,JMMCE,Vol.11 No.10, 2012
Folahan A. Adekola Alafara A. Baba Sherifat Buhari
Citations: 4(Details)
Development of Mathematical Equation for Fraction of Solid in AlSi7Mg Alloy Solidification Simulation ,JMMCE,Vol.7 No.1, 2008
O.O. Oluwole G.O. Oluwadare A.A. Afonja
Citations: 4(Details)
Novel Technology for Chlorination of Niobium and Tantalum Oxides and Their Low-Grade Ore Concentrates ,JMMCE,Vol.7 No.2, 2008
B. A. Shainyan Yu. S. Danilevich Yu. L. Garmazov A. L. Finkelstein T. S. Aisueva V. K. Turchaninov
Citations: 4(Details)
Towards the Development of CO2 Separation Membranes ,JMMCE,Vol.7 No.2, 2008
Gerard Caneba Michael Renier Brian Ott
Citations: 4(Details)
Structural and microstructural characteristics of B-doped PbTe semiconductor ,JMMCE,Vol.5 No.2, 2006
Jovica N. Stojanovic
Citations: 4(Details)
Effects of Variation of Some Process Variables on Recrystallization Rate of Aluminium Alloy (6063) ,JMMCE,Vol.8 No.1, 2009
O.E. Olorunniwo P.O. Atanda K.J. Akinluwade
Citations: 4(Details)
Stress Loops Effect in Ductile Failure of Mild Steel ,JMMCE,Vol.8 No.4, 2009
O.O. Oluwole
Citations: 4(Details)
Effect of Blast Furnace Sludge (BFS) Characteristics on Suitable Recycling Process Determining ,JMMCE,Vol.5 No.4, 2017
Mamdouh Omran Timo Fabritius Timo Paananen
Citations: 4(Details)
Influence of Angle Ply Orientation on Tensile Properties of Carbon/Glass Hybrid Composite ,JMMCE,Vol.1 No.5, 2013
M. N. GuruRaja A. N. HariRao
Citations: 4(Details)
The Effect of Copper Addition on the Mechanical and Wear Properties of Grey Cast Iron ,JMMCE,Vol.2 No.5, 2014
J. O. Agunsoye S. A. Bello S. B. Hassan R. G. Adeyemo J. M. Odii
Citations: 4(Details)
Carbonate Coatings as Protective Barriers for Pipe Borne Water Transport Material ,JMMCE,Vol.11 No.6, 2012
Lasisi Ejibunu Umoru Abimbola Oladipo Oladeji Oluremi Ige
Citations: 4(Details)
Production and Characterization of Nano Structured Silicon Carbide by High Energy Ball Milling ,JMMCE,Vol.11 No.5, 2012
J. Babu Rao Dil Kush NRMR Bhargava
Citations: 4(Details)
Structural Evolution and Properties of Hot Rolled Steel Alloys ,JMMCE,Vol.11 No.4, 2012
Emmanuel Isaac Akpan Idoko Andrew Haruna
Citations: 4(Details)
Adsorption of Hg0 on the Unburned Carbon with HF Acid Leaching ,JMMCE,Vol.3 No.1, 2004
Jinjing Luo J.Y. Hwang B. C. Greenlund Zhiyong Xu
Citations: 4(Details)
Separation of Metals from a Slag Using a Multi-cell Jig ,JMMCE,Vol.2 No.2, 2003
David C. Yang Ricus van Reenan Vimal Bhimsan
Citations: 4(Details)
Enrichment of Molybdenum and Fluorite by Flotation of Fluorite Ore Containing Molybdenum ,JMMCE,Vol.5 No.2, 2006
Abuzer Akgün İbrahim Teğin Recep Ziyadanoğulları
Citations: 4(Details)
Potentials of Bambusa vulgaris Grown in Southeast Nigeria for the Manufacture of Wood-Cement Composite Panels ,JMMCE,Vol.2 No.5, 2014
Eugene O. Onuorah Elias Chukwunonso Nnabuife Joseph T. Nwabanne
Citations: 4(Details)
Effect of V-Ti on the Microstructure and Abrasive Wear Behavior of 6CrC Cast Steel Mill Balls ,JMMCE,Vol.2 No.5, 2014
S. I. Maldonado-Ruiz P. Orozco-González V. H. Baltazar-Hernández A. Bedolla-Jacuinde M. A. L. Hernández-Rodríguez
Citations: 4(Details)
Sand Slurry Erosive Wear Behavior of Hot Extruded Al6061-SiC Composites ,JMMCE,Vol.10 No.6, 2011
C.S. Ramesh R. Keshavamurthy
Citations: 4(Details)
Models for Assessment and Computational Analysis of Hardness of the Heat Affected Zone in Water Cooled Aluminum Weldment ,JMMCE,Vol.10 No.8, 2011
C. I. Nwoye C. N. Anyakwo E. Obidiegwu N. E. Nwankwo
Citations: 4(Details)
Tempering Heat Treatment Effects on Steel Welds ,JMMCE,Vol.10 No.8, 2011
A.V. Adedayo S.A. Ibitoye O.O. Oluwole
Citations: 4(Details)
Crystal Growth, Thermal, Mechanical and Optical Properties of a New Organic Nonlinear Optical Material: Ethyl P-Dimethylamino Benzoate (EDMAB) ,JMMCE,Vol.10 No.1, 2011
V. Natarajan J. Kalyana Sundar P. Selvarajan M. Arivanandhan K. Sankaranarayanand S. Natarajan Y. Hayakawa
Citations: 4(Details)
The Influence of Creep on the Mechanical Properties of Calcium Carbonate Nanofiller Reinforced Polypropylene ,JMMCE,Vol.10 No.2, 2011
Chrisopher Chukwutoo Ihueze Chinedum Ogonna Mgbemena Ugwu Sylveste
Citations: 4(Details)
Thermo-Mechanical Processing of Iron-Phosphorous-Carbon Alloys ,JMMCE,Vol.10 No.1, 2011
Yashwant Mehta P. S. Mishra
Citations: 3(Details)
The Effect of Time, Percent of Copper and Nickel on the Natural Precipitation Hardness of Al – Cu – Ni Powder Metallurgy Alloys Using Design of Experiments ,JMMCE,Vol.10 No.6, 2011
Mohammad M. Hamasha Ahmad T. Mayyas Mohammed T. Hayajneh Adel M. Hassan
Citations: 3(Details)
Evaluation of the Influence of Fossil Fuel on Corrosion Resistance of Brass ,JMMCE,Vol.2 No.3, 2014
Olayide Rasaq Adetunji Peter Olaitan Aiyedun Sidikat Ibiyemi Kuye Dauda Adewale Lateef
Citations: 3(Details)
Production and Characterization of Pozzolan with Raw Clay from Burkina Faso ,JMMCE,Vol.4 No.3, 2016
Mohamed Seynou Younoussa Millogo Lamine Zerbo Issiaka Sanou François Ganon Raguilnaba Ouedraogo Kalsibiri Kaboré
Citations: 3(Details)
Chemical Treatment Effects of Blue, Yellow and Green Colors with Heating Methods on Agates of Cheshme Shoor Area, Qom, Iran ,JMMCE,Vol.4 No.3, 2016
Mohammad Yazdi Reyhane Lotfi Fariborz Masoudi Niloofar Musavi Pak
Citations: 3(Details)
Enrichment of U, Mo, V, Ni and Ti from asphaltite ash ,JMMCE,Vol.4 No.1, 2005
Işıl Aydın Fırat Aydın Recep Ziyadanoğulları
Citations: 3(Details)
Characterization and Transport of Contaminated Sediments in the Southern Central Lake Superior ,JMMCE,Vol.2 No.2, 2003
Jaebong Jeong S. Douglas McDowell
Citations: 3(Details)
Corrosion-Wear of ST60-Mn Steel in Cassava Juice ,JMMCE,Vol.11 No.2, 2012
M. A. Bodude W.A. Ayoola D. E. Esezobor A. A. Agbeleye
Citations: 3(Details)
Characterization of Spent Prebaked Aluminium Carbon Anode as a Source of Fuel for Foundrymen ,JMMCE,Vol.11 No.1, 2012
A. Andrews E. Gikunoo B. K. Kyei-Fram R. Sarfo
Citations: 3(Details)
Dielectric and Thermal Studies of Copper Doped Magnesium Hydrogen Maleate Hexahydrate Single Crystals ,JMMCE,Vol.10 No.15, 2011
B. Rajagopal A.V. Sarma M.V. Ramana
Citations: 3(Details)
Hydrometallurgical Purification of Some Clay Deposits for High Temperature Applications ,JMMCE,Vol.11 No.5, 2012
D.O. FOLORUNSO S. ARIBO P. O. OLUBAMBI J.O. BORODE
Citations: 3(Details)
Preparation and Characterization of ZnSe/EVA Nanocomposites for Photovoltaic Modules ,JMMCE,Vol.3 No.4, 2015
Jose Sebastian Eby Thomas Thachil Jobin Job Mathen Augustine J. Edakkara Nelson Kuriakose Ginson P. Joseph Joby Sebastian
Citations: 3(Details)
Role of Microstructural Features in Toughness Improvement of Zirconia Toughened Alumina ,JMMCE,Vol.4 No.1, 2016
Olaniyi Fakolujo Ali Merati Mariusz Bielawski Manon Bolduc Michel Nganbe
Citations: 3(Details)
Value Addition to Red Sediment Placer Sillimanite Using Microwave Energy and in Depth Structural and Morphological Characterization of Mullite ,JMMCE,Vol.11 No.11, 2012
Satya Sai Srikant Saroj Kumar Singh Partha Sarathi Mukherjee Raghupatruni Bhima Rao
Citations: 3(Details)
Effect of Buffer Solutions on the Flow and Fracture in Calcite ,JMMCE,Vol.8 No.3, 2009
S.O.O. Olusunle W.O. Siyanbola A.R. Adetunji O.O. Adewoye
Citations: 3(Details)
Nucleation Reduction Strategy of (Brushite) CHP Crystals in SMS Media and Its Characterization Studies ,JMMCE,Vol.7 No.1, 2008
G. Kanchana P. Sundaramoorthi R. Santhi S. Kalainathan G.P. Jeyanthi
Citations: 3(Details)
Application of High Tension Roll Separator for the Separation of Titanium Bearing Minerals: Process Modeling and Optimization ,JMMCE,Vol.11 No.10, 2012
Srijith Mohanan Sunil Kumar Tripathy Y. Ramamurthy C. Raghu Kumar
Citations: 3(Details)
Effect of Al2O3 Content and Process Variables on Structure and Properties of Al-Al2O3 Compacts ,JMMCE,Vol.2 No.2, 2014
Arindam Ghosh Subrata Chatterjee
Citations: 3(Details)
Heat Treatment Effect on Microstructure and Mechanical Properties of Re-Containing Inconel 718 Alloy ,JMMCE,Vol.11 No.9, 2012
Nader El-Bagoury Mohamed Ramadan
Citations: 3(Details)
Influence of Microstructure on Beneficiation of Low-Grade Siliceous Manganese Ore from Orissa, India ,JMMCE,Vol.1 No.3, 2013
Patitapaban Mishra Birendra Kumar Mohapatra Pradeep Kumar Mallick Khageswar Mahanta
Citations: 3(Details)
Processing and Mechanical Properties of Al2O3 and Red Mud Particle Reinforced AA6061 Hybrid Composites ,JMMCE,Vol.4 No.2, 2016
Shaik Mujeeb Quader B. Suryanarayana Murthy Pinninti Ravinder Reddy
Citations: 3(Details)
Differential Flotation of Some Egyptian Feldspars for Separation of Both Silica and Iron Oxides Contaminants ,JMMCE,Vol.3 No.6, 2015
Tawfik Refaat Boulos Suzan Sami Ibrahim Ahmed Yehia
Citations: 3(Details)
Synthesis of 4A Zeolite and Characterization of Calcium- and Silver-Exchanged Forms ,JMMCE,Vol.5 No.5, 2017
Saeed Golbad Parisa Khoshnoud Nidal Abu-Zahra
Citations: 3(Details)
Carbothermic Reduction Kinetics of Ka’oje (Nigeria) Manganese Ore ,JMMCE,Vol.2 No.5, 2014
R. A. Muriana E. Muzenda O. K. Abubakre
Citations: 3(Details)
Effect of Core Thickness and Core Density on Low Velocity Impact Behavior of Sandwich Panels with PU Foam Core ,JMMCE,Vol.3 No.3, 2015
Sunith Babu Loganathan Hanumanahally Kambada Shivanand
Citations: 3(Details)
Model for Prediction of the Concentration of Extracted Tin during Leaching of Cassiterite in Potassium Hydroxide Solution ,JMMCE,Vol.11 No.7, 2012
Onyedika Gerald Ugwu Priscilla Ogwuegbu Martin Ejike Emmanuel Nwoye Chukwuka Jiann-Yang Hwang
Citations: 3(Details)
Characterization and Comparison of Saprist and Fibrist Newfoundland Sphagnum Peat Soils ,JMMCE,Vol.11 No.7, 2012
Emmanuel S. Asapo Cynthia A. Coles
Citations: 3(Details)
Extender Properties of Some Nigerian Clays ,JMMCE,Vol.4 No.5, 2016
Iheoma C. Chukwujike Isaac O. Igwe
Citations: 3(Details)
Characterization and Iron Removal Treatment of Ion-Adsorption Rare Earth Tailings in Southern China ,JMMCE,Vol.4 No.2, 2016
Yongqing Wang Xin Nie Qibing Chang Huayin Liang Xiaozhen Zhang Jian-Er Zhou
Citations: 2(Details)
X-Ray Diffraction, Electron Paramagnetic Resonance and Optical Absorption Study of Bauxite ,JMMCE,Vol.2 No.2, 2014
Tanguturi Ravindra Reddy Krishnan Thyagarajan Ovidio Almanza Montero Sanapa Reddy Lakshmi Reddy Tamio Endo
Citations: 2(Details)
Microstructure and Corrosion Properties of the Plasma-MIG Welded AA5754 Automotive Alloy ,JMMCE,Vol.3 No.4, 2015
A. Abouarkoub G. E. Thompson X. Zhou G. Scamans
Citations: 2(Details)
The Effect of Cobalt Mixing on Pure Copper Mercury Thiocyanate Nonlinear Optical Crystal ,JMMCE,Vol.11 No.7, 2012
B. Vijayabhaskaran C.Ramachandra Raja
Citations: 2(Details)
Adsorption and Post Adsorption Behavior of Schwertmannite with Various Oxyanions ,JMMCE,Vol.5 No.2, 2017
Khandala Khamphila Ritsu Kodama Tsutomu Sato Tsubasa Otake
Citations: 2(Details)
Age Strengthening of Grey Cast Iron Alloys for Machine Cutting Tools Production ,JMMCE,Vol.3 No.3, 2015
A. I. Opaluwa A. Oyetunji S. O. Seidu
Citations: 2(Details)
Liberation Size and Beneficiation of Enyigba Lead Ore, Ebonyi State, South-East Nigeria ,JMMCE,Vol.3 No.3, 2015
Ettu Obassi David Terfa Gundu Usman Muhammad Akindele
Citations: 2(Details)
Evaluation of Effects of Synthetic Compound and Mineral Admixture on Crystal Structure of Concrete ,JMMCE,Vol.3 No.3, 2015
Samuel Oloruntoba Olugbenga Olusunle Theresa Chikwuo Ezenwafor Bidemi Sikirat Jiddah-Kazeem Akeem Kareem Ojo Jeremiah Akinribide Adekunle Taofeek Oyelami
Citations: 2(Details)
Effect of Bitumen on the Mechanical Properties of Medium Carbon Steel ,JMMCE,Vol.1 No.4, 2013
Abdulmumin Akoredeley Alabi Peter Bitrus Madakson Danjuma Saleh Yawas Terver Ause
Citations: 2(Details)
A Mathematical Model of an Evaporative Cooling Pad Using Sintered Nigerian Clay ,JMMCE,Vol.11 No.11, 2012
Chukwuneke Jeremiah Lekwuwa Ajike Chinagorom Ogbu Achebe Chinonso Hubert Okolie Paul Chukwulozie
Citations: 2(Details)
Electroslag Remelting of High Technological Steels ,JMMCE,Vol.3 No.6, 2015
Hossam Halfa A. M. Reda 1 1
Citations: 2(Details)
Evaluation of Mechanical and Microstructural Properties of α-Brass Alloy Produced from Scrap Copper and Zinc Metal through Sand Casting Process ,JMMCE,Vol.5 No.1, 2017
Edward E. Igelegbai Oluwaseun A. Alo Adefemi O. Adeodu Ilesanmi A. Daniyan
Citations: 2(Details)
Effect of Orientation and Applied Load on Abrasive Wear Property of Brass 60:40 ,JMMCE,Vol.2 No.1, 2014
Mohd Shadab Khan Zahir Hasan Syed Mohd Farhan
Citations: 2(Details)
Fatigue Behaviour of Silicon Carbide and Fly Ash Dispersion Strengthened High Performance Hybrid Al 5083 Metal Matrix Composites ,JMMCE,Vol.5 No.5, 2017
N. Santhosh U. N. Kempaiah Ganesh Sajjan Ashwin C. Gowda
Citations: 2(Details)
Towards the Recovery of By-Product Metals from Mine Wastes: An X-Ray Absorption Spectroscopy Study on the Binding State of Rhenium in Debris from a Centennial Iberian Pyrite Belt Mine ,JMMCE,Vol.2 No.2, 2014
Maria-Ondina Figueiredo Teresa Pereira da Silva João Pedro Veiga Daniel de Oliveira Maria João Batista
Citations: 2(Details)
Effect of Atmospheric Plasma Paint Removal on the Fatigue Performance of 2024-T3 Aluminium Alloy Sheet ,JMMCE,Vol.6 No.1, 2018
Marko Yanishevsky Ali Merati Yan Bombardier
Citations: 2(Details)
Electrochemical Impedance Spectroscopy of Hybrid Epoxy Resin Emulsion Coatings ,JMMCE,Vol.11 No.10, 2012
Rakesh N. Patil Brihbihari V. Sharma Prakash A. Mahanwar
Citations: 2(Details)
Electrostatic Separation as a Characterizing Tool for the Insulation of Conductive Mineral Particles ,JMMCE,Vol.2 No.3, 2014
Philippe Bébin Dave Mavrovic Annie Rochette
Citations: 2(Details)
Characterization Studies on Ilmenite of Ullal and Suratkal along Karnataka Coastline, West Coast of India ,JMMCE,Vol.8 No.6, 2009
M. Sundararajan K.H. Bhat N. Babu M.E.K. Janaki P.N. Mohan Das
Citations: 2(Details)
In-vitro Studies of Artificially Removed Human Renal Stones in the Economic Age Group (30-40years) ,JMMCE,Vol.6 No.2, 2007
P. Sundaramoorthi S. Kalainathan G. Kanchana R. Santhi
Citations: 2(Details)
In-Vitro Studies of Artificially Removed Human Renal Stone Minerals by Sonic Engineering Approach-I ,JMMCE,Vol.8 No.1, 2009
G. Kanchana P. Sundaramoorthi G.P. Jeyanthi
Citations: 2(Details)
A Study of Processing Parameters on the Carburization of C2R Steels ,JMMCE,Vol.8 No.2, 2009
P.O. Atanda O.E. Olorunniwo L.E. Umoru A.D. Adeyeye
Citations: 2(Details)
Adsorption of Surfactant Dispersed Nanometer Magnetite ,JMMCE,Vol.1 No.2, 2002
J. Y. HWANG
Citations: 2(Details)
Mechanical Properties and Dimensional Stability of Rigid PVC Foam Composites Filled with High Aspect Ratio Phlogopite Mica ,JMMCE,Vol.3 No.4, 2015
Murtatha M. Jamel Parisa Khoshnoud Subhashini Gunashekar Nidal Abu-Zahra
Citations: 2(Details)
Characterization and Utilization of Eziulo Clay as an Extender in Emulsion Paint Formulations ,JMMCE,Vol.5 No.4, 2017
Isaac O. Igwe Gift Osuoha Chinedu Nwapa
Citations: 2(Details)
Quantification of Phases in Lahore (Pakistan) Airborne Particulates by Matrix-Flushing Method ,JMMCE,Vol.1 No.4, 2013
Naveed Ahmad Khadim Hussain Shahzad Naseem
Citations: 2(Details)
Beneficiation and Characterization of Gold from Itagunmodi Gold Ore by Cyanidation ,JMMCE,Vol.2 No.4, 2014
Olasupo Daniel Ogundare Mosobalaje Oyebanji Adeoye Adelana Rasaq Adetunji Olusegun Oyeleke Adewoye
Citations: 2(Details)
Identification of Growth Promoter to Fabrication SiCp/Al2O3 Ceramic Matrix Composites Prepared by Directed Metal Oxidation of An Al Alloy ,JMMCE,Vol.11 No.11, 2012
Malkapuram Devaiah Thodeti Srihari Thankappan Pillai Rajasekharan
Citations: 2(Details)
Effect of Calcium Nitrate and Sodium Nitrite on the Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid ,JMMCE,Vol.2 No.3, 2014
Mohammed Adamu Lasisi Ejibunu Umoru Oladeji Oluremi Ige
Citations: 2(Details)
Characterization of Surface State of Inert Particles: Case of Si and SiC ,JMMCE,Vol.4 No.1, 2016
Désiré M. K. Abro Pierre Dablé Fernando Cortez-Salazar Véronique Amstutz Hubert Girault
Citations: 2(Details)
Development of a Novel Oven-Furnace ,JMMCE,Vol.5 No.2, 2017
Olaniyi Gladius Babatunde Rufus Sola Fayose Ayodele Abeeb Daniyan Theresa Chikwuo Ezenwafor Ebenezer Olubanji Oniya Nathaniel O. Ajayi Kunle Michael Oluwasegun Akintoye Oni Adedeji Akintunde Ajenifuja Arinola Gift Akinseloyin Adelana Razak Adetunji Samuel Oloruntoba Olugbenga Olusunle
Citations: 2(Details)
Double Acid-Base Extraction of Silicic Acid from Quartz Sand ,JMMCE,Vol.5 No.6, 2017
Laksmita Prima Santi Djoko Mulyanto Didiek Hadjar Goenadi
Citations: 2(Details)
Activation of Jordanian Ore Bentonite by Sodium Carbonates ,JMMCE,Vol.3 No.6, 2015
Shakhatreh K. Saleh Mehaysen A. Mahasneh
Citations: 2(Details)
Effect of Some Plating Variables on Zinc Coated Low Carbon Steel Substrates ,JMMCE,Vol.10 No.13, 2011
Bamidele M. Durodola Joseph A.O. Olugbuyiro
Citations: 2(Details)
Analytical Study of Two Differently Ranked Coals Using UV-VIS-NIR Spectroscopy ,JMMCE,Vol.10 No.10, 2011
B. Manoj A.G. Kunjomana
Citations: 2(Details)
A Model for FeSiMg Alloy Production by Reduction Technique ,JMMCE,Vol.10 No.9, 2011
Saeed Nabil Saeed Ghali
Citations: 2(Details)
Phosphorus Degradation Capability of Aspergillus terreus on Nigeria’s Agbaja Iron Ore ,JMMCE,Vol.10 No.12, 2011
C.N. Anyakwo O.W. Obot
Citations: 2(Details)
Effect of Beryllium Aluminum Cyclosilicate on Thermal Expansion Behavior of Al-Based Composites ,JMMCE,Vol.5 No.3, 2017
V. Bharat B. Durga Prasad K. Venkateswarlu
Citations: 2(Details)
Investigation Of Hardness Anisotropy In Tourmaline ,JMMCE,Vol.3 No.2, 2004
M.O. Adeoye O.O. Adewoye
Citations: 2(Details)
The Influence of Polyurethane Foam on the Insulation Characteristics of Mortar Pastes ,JMMCE,Vol.5 No.2, 2017
Ahmed Adel Mahmoud Elsayed Abdel Ader Nasr Ahmed Abdel Hamed Maamoun
Citations: 2(Details)
Design and Performance Evaluation of a Sustained Load Dual Grip Creep Testing Machine ,JMMCE,Vol.2 No.6, 2014
Kenneth Kanayo Alaneme Bethel Jeremiah Bamike Godwin Omlenyi
Citations: 2(Details)
Controlled-Release Analysis of Potassium Permanganate Using PMMA Matrix ,JMMCE,Vol.2 No.6, 2014
Jude O. Ighere Ramesh C. Chawla
Citations: 2(Details)
Performance of Nickel-Coated Manganese Steel in High-Chloride Low-Sulphate Seawater Environments ,JMMCE,Vol.9 No.10, 2010
O. E. Olorunniwo P. O. Atanda K. J. Akinluwade A.R. Adetunji K.M. Oluwasegun
Citations: 2(Details)
Effect of Silicon on the Corrosion Behavior of Powder-Processed Phosphoric Irons ,JMMCE,Vol.9 No.10, 2010
Yashwant Mehta Shefali Trivedi K. Chandra P.S. Mishra
Citations: 2(Details)
Effect of Heat Treatment on Fe–0.3%P–0.14%C Alloy ,JMMCE,Vol.9 No.9, 2010
Yashwant Mehta K. Chandra Rajinder Ambardar P. S. Mishra
Citations: 2(Details)
Effect of Applied Load on Dry Sliding Wear Property of Aged TiNiCu Alloy ,JMMCE,Vol.9 No.9, 2010
Narendranath. S S. Basavarajappa K.V. Arun S. Manjunath Yadav
Citations: 2(Details)
The Galerki Approach for Finite Elements of Field Functions: The Case of Buckling in GRP ,JMMCE,Vol.9 No.4, 2010
Chukwutoo Christopher Ihueze
Citations: 2(Details)
Hot Rolling and Ageing Effect on the Pseudoelasticity Behaviour of Ti-Rich TiNi Shape Memory Alloy ,JMMCE,Vol.9 No.4, 2010
Narendranath. S. Vijay Desai S. Basavarajappa K.V. Arun S. Manjunath Yadav
Citations: 2(Details)
Apatite Microstructure and Composition in Manganese Formation of Eastern Ghats, Orissa, India ,JMMCE,Vol.10 No.5, 2011
Subhasmita Jena B.K. Mohapatra P. P. Singh
Citations: 2(Details)
Effect of Tsunami in the Ilmenite Population: An Examination through X-Ray Diffraction, Scanning Electron Microscopy and Inductively Coupled Plasma Atomic Emission ,JMMCE,Vol.9 No.11, 2010
Babu Nallusamy Sinirani Babu M. Sundararajan P. Seralathan R. Bhima Rao P.N. Mohan Das
Citations: 2(Details)
Post Heat Treatment of Plasma Sprayed Pure and Alumina-Titania Reinforced Hydroxyapatite Coating on SS 304 Steel ,JMMCE,Vol.10 No.2, 2011
Gurbhinder Singh Surendra Singh Satya Prakash
Citations: 2(Details)
Modeling Grain Structures of Some Carbon Steels using Voronoi Tesselation ,JMMCE,Vol.10 No.3, 2011
O.O. Oluwole A.L. Akinkunmi
Citations: 1(Details)
Effect of Chromium on Magnetic Characteristics of Powder Processed Fe-0.35wt%P Alloy ,JMMCE,Vol.10 No.7, 2011
Deepika Sharma Kamlesh Chandra Prabhu Shankar Misra
Citations: 1(Details)
Finite Elements Approaches in the Solution of Field Functions in Multidimensional Space: A Case of Boundary Value Problems ,JMMCE,Vol.9 No.10, 2010
Chukwutoo Christopher Ihueze Okafor Emeka Christian Edelugo Sylvester Onyemaechi
Citations: 1(Details)
Selective Separation of Light and Heavy Rare Earth Elements from the Pregnant Leach Solution of Apatite Ore with D2EHPA ,JMMCE,Vol.6 No.5, 2018
Ariuntuya Battsengel Altansukh Batnasan Kazutoshi Haga Atsushi Shibayama
Citations: 1(Details)
Effects of Graphite Additions and Heat Treatment on the Microstructure, Mechanical and Tribological Properties of 13% Chromium White Iron ,JMMCE,Vol.2 No.4, 2014
J. O. Agunsoye S. A. Bello I. O. Awe A. A. Yekinni R. G. Adeyemo A. O. Ologunagba
Citations: 1(Details)
Leachability of Oil Shale Ash from Isfir Al-Mahata Oil Shale, Southern Jordan ,JMMCE,Vol.4 No.5, 2016
Hani M. Alnawafleh Mohammad S. Al-Harahsheh Adnan M. Al-Harahsheh
Citations: 1(Details)
Effect of MnO on Mineral Composition of CaO-SiO2-MgO-Al2O3-Cr2O3 System ,JMMCE,Vol.5 No.3, 2017
Yue Yu Jianli Li Mengxiong Li Zhengliang Xue
Citations: 1(Details)
Research of Crystallization of Aluminums Cast Iron ,JMMCE,Vol.10 No.13, 2011
Saule Kaldybayeva
Citations: 1(Details)
Spectro-Structural Characterization of Chalcogenide Films Containing Cd, Te and Se ,JMMCE,Vol.10 No.11, 2011
T.M. Rajakumar C. Sanjeeviraja R. Chandramani
Citations: 1(Details)
Simulation of Torque during Rod Rolling of HC SS316 at Low Strain Rate Using “Phantom-Roll” Method ,JMMCE,Vol.10 No.15, 2011
P. O. Aiyedun O. S. Igbudu B.O. Bolaji
Citations: 1(Details)
Mechanical Properties of Hybrid Cementitous Composites ,JMMCE,Vol.11 No.4, 2012
I.O. Oladele A.D. Akinwekomi U. Donatus
Citations: 1(Details)
Separation of Kaolinite from Ion-Adsorption Rare Earth Tailings in Southern China and Iron Removal Treatment ,JMMCE,Vol.4 No.1, 2016
Yongqing Wang Huayin Liang Qibing Chang Xiaozhen Zhang Jian’er Zhou
Citations: 1(Details)
The Effect of Atmospheric Plasma Paint Stripping on the Fatigue Crack Growth Properties of Aluminium Substrates ,JMMCE,Vol.5 No.4, 2017
Ali Merati Marko Yanishevsky Tessa Despinic Philip Lo
Citations: 1(Details)
Effect of Shakeout Time on Microstructure and Hardness Properties of Grey Cast Iron ,JMMCE,Vol.2 No.4, 2014
Saliu Ojo Seidu Daniel Toyin Oloruntoba Iyiola Olatunji Otunniyi
Citations: 1(Details)
Surface Characterization of Metallic Particles in Printed Circuit Board Comminution Fines and the Processing Implication ,JMMCE,Vol.11 No.6, 2012
Iyiola Olatunji Ogunniyi M. K. G. Vermaak Dick Groot
Citations: 1(Details)
Identification of Optimum Composition and Mechanical Properties of Al-Ni Metal Matrix Composite ,JMMCE,Vol.3 No.4, 2015
Manoj Kumar Pal Simranjeet Singh Sandhu Rohan Kalia Arka Ghosh
Citations: 1(Details)
Electroslag Refining of CrNiMoWMnV Ultrahigh-Strength Steel ,JMMCE,Vol.5 No.6, 2017
Mohammed Ali Mamdouh Eissa Hoda El Faramawy David Porter Jukka Kömi M. F. El-Shahat Taha Mattar
Citations: 1(Details)
Numerical Optimization of Sand Casting Parameters Using the Dantzig’s Simplex Method ,JMMCE,Vol.1 No.5, 2013
John Ogheneortega Oji Simon Godenaan Datau Kunle Joseph Akinluwade Adeyinka Taofeek Taiwo Dayo Adeyemi Isadare Sunday Hendrix Pamtoks Adelana Rasaki Adetunji
Citations: 1(Details)
Study of Mechanical Properties of Raffia Palm Fibre/Groundnut Shell Reinforced Epoxy Hybrid Composites ,JMMCE,Vol.6 No.2, 2018
Geoffrey Bem Nyior Sylvester Aondolumun Aye Sesugh Emmanuel Tile
Citations: 1(Details)
Alternate Environmentally Friendly De-Painting Process for Aircraft Structures-Atmospheric Plasma ,JMMCE,Vol.5 No.4, 2017
Ali Merati Marko Yanishevsky Tessa Despinic Philip Lo Vladimir Pankov
Citations: 1(Details)
Characterization of Sulphides Patches from the Neyveli Lignite Deposit ,JMMCE,Vol.8 No.3, 2009
D.S. Rao R. Nagendra E. Rasool Mohideen B.R. Nayak
Citations: 1(Details)
Optimization of Electrical Parameters for Production of Carbon Nanotubes ,JMMCE,Vol.11 No.10, 2012
Sayantan Chattopadhyay Kalyan Kumar Singh
Citations: 1(Details)
Effect of Organic Waste on Crystal Structure and Mechanical Properties of Concrete ,JMMCE,Vol.3 No.5, 2015
Samuel Oloruntoba Olugbenga Olusunle Theresa Chikwuo Ezenwafor Bidemi Sikirat Jiddah-Kazeem Akeem Kareem Ojo Jeremiah Akinribide Adekunle Taofeek Oyelami
Citations: 1(Details)
Analysis on Multi Responses in Face Milling of Ammc Using Fuzzy-Taguchi Method ,JMMCE,Vol.3 No.4, 2015
Madiri Samuel Sukumar Borra Vijay Sudheer Reddy P. Venkataramaiah
Citations: 1(Details)
Microstructural, Chemical and Mineralogical Analyses for Understanding the Geotechnical Properties of Clayey Soils ,JMMCE,Vol.4 No.6, 2016
Yvette Tankpinou Kiki Nadia Saiyouri Victor Gbaguidi Yannick Anguy Cécile Gaborieau Richard Fabre
Citations: 1(Details)
Phase, Microstructure and Beneficiation of Manganese Ore by Acid Leaching ,JMMCE,Vol.6 No.1, 2018
Sajad Ali Yaseen Iqbal Kamran Ahmad Billal Afridi
Citations: 1(Details)
Suitability of Some Selected Clay Deposit from Edo, Ogun, Ondo and Ekiti State of Nigeria for Ceramic Water Filters Production ,JMMCE,Vol.4 No.1, 2016
Smart Adeleye Olubayode Olufiropo Samson Awokola Enoch Olugbenga Dare Olubayo Timothy Olateju 1 1
Citations: 1(Details)
Hydrometallurgical Processing of a Nigerian Galena Ore in Nitric Acid: Characterization and Dissolution Kinetics ,JMMCE,Vol.6 No.3, 2018
Ikechukwu A. Nnanwube Okechukwu D. Onukwuli
Citations: 1(Details)
Effects of Processing Methods on Mechanical Properties of Alkali Treated Bagasse Fibre Reinforced Epoxy Composite ,JMMCE,Vol.6 No.3, 2018
Geoffrey Bem Nyior Ekene Chukwuka Mgbeahuru
Citations: 1(Details)
Simulation and Optimization Characteristic of Novel MoS2/c-Si HIT Solar Cell ,JMMCE,Vol.5 No.5, 2017
Sue Xu Xiangbin Zeng Wenzhao Wang Guangtong Zhou Yishuo Hu Shaoxiong Wu Yang Zeng
Citations: 1(Details)
Effects of Machine Parameter and Natural Factors on the Productivity of Loading and Haulage Equipment ,JMMCE,Vol.6 No.1, 2018
Martin Itoolwa Kulula Jide Muili Akande
Citations: 1(Details)
Effect of Tin Tailings on Some Refractory Properties of Alumino-Silicates (Alkaleri) Clay ,JMMCE,Vol.1 No.2, 2013
Victor Sunday Aigbodion Clement Uche Atuanya Chikaodi Cynthia Daniel Mkpume
Citations: 1(Details)
Analysis on Some Physical and Chemical Properties of Oreke Dolomite Deposit ,JMMCE,Vol.1 No.2, 2013
Jide Muili Akande Sunday Ayodele Agbalajobi
Citations: 1(Details)
Mineralogical and Geochemical Characteristics of Caprock Formations Used for Storage and Sequestration of Carbon Dioxide ,JMMCE,Vol.3 No.5, 2015
Hedi Jedli Hachem Hedfi Abdessalem Jbara Souhail Bouzgarrou Khalifa Slimi
Citations: 1(Details)
Reduction of Undercuts in Fillet Welded Joints Using Taguchi Optimization Method ,JMMCE,Vol.3 No.3, 2015
Joseph Achebo Sule Salisu
Citations: 1(Details)
Determination of Work Index of Gyel-Bukuru Columbite Ore in Plateau State, Nigeria ,JMMCE,Vol.3 No.3, 2015
Oladunni Oyelola Alabi Shehu Aliyu Yaro George Thomas Dungka Ferdinand Asuke Emmanuel Toi Dauda
Citations: 1(Details)
Analysis on the Spinning Process and Properties of Tencel Yarn ,JMMCE,Vol.3 No.1, 2015
Ya Wang Dudi Gong Yan Bai Yunqi Zhai
Citations: 1(Details)
Geotechnical and Mineralogical Characterization of Soils Derived from Schist along Shango-Chanchaga Highway, Minna, Central Nigeria ,JMMCE,Vol.1 No.6, 2013
Salome Hephzibah Waziri Abdullahi Idris-Nda Irmiya Samson Amoka Yusuf Ishaq
Citations: 1(Details)
Unification of the Quadratic Model Equations of the Inhibition Characteristics of Acidified Ocimum Basilicum on the Corrosion Behaviour of Mild Steel ,JMMCE,Vol.1 No.6, 2013
Michael O. Nwankwo Paul A. Nwobasi Peter O. Offor Ndubuisi E. Idenyi
Citations: 1(Details)
The Effects of Blends of Enugu Coal and Anthracite on Tin Smelting Using Nigerian Dogo Na Hauwa Cassiterite ,JMMCE,Vol.1 No.6, 2013
Fatai Afolabi Ayeni OladunniOyelola Alabi Rose Okara
Citations: 1(Details)
Crystallographic Study of Uranium-Thorium Bearing Minerals in Tranomaro, South-East Madagascar ,JMMCE,Vol.1 No.6, 2013
Frank Elliot Sahoa Naivo Rabesiranana Raoelina Andriambololona Nicolas Finck Christian Marquardt Hörst Geckeis
Citations: 1(Details)
Studies on the Effect of Zinc Chloride Mixing on Bisthiourea Cadmium Chloride Crystals ,JMMCE,Vol.1 No.6, 2013
R. S. Sundararajan M. Senthilkumar C. Ramachandraraja
Citations: 1(Details)
2k Factorial Experiments on Factors that Influence the Recovery of Gold during the Upgrade of Ilesha-Itagunmodi Gold Ore through Froth Flotation ,JMMCE,Vol.2 No.1, 2014
Kayode Emmanuel Oluwabunmi Abraham Adewale Adeleke Adelana Razak Adetunji Samson Olaitan Jeje Abiodun Ayodeji Abioye Olusola Adedayo Adesina Fatai Afolabi Ayeni Folahan Peter Ibitoye
Citations: 1(Details)
Effect of Laser Cladding Al Ni TiC Powder on Microstructure and Properties of Aluminum Alloy ,JMMCE,Vol.5 No.1, 2017
Xiaolin Zhang Kemin Zhang Jinxin Ma Yu Wang
Citations: 1(Details)
Inhibition of Aluminium Corrosion Using Carica papaya Leaves Extract in Sulphuric Acid ,JMMCE,Vol.6 No.1, 2018
Baruku Kasuga Eugene Park Revocatus L. Machunda
Citations: 1(Details)
Mechanical, Microstructural and Mineralogical Analyses of Porous Clay Pots Elaborated with Rice Husks ,JMMCE,Vol.6 No.3, 2018
Yeri Dah-Traoré Lamine Zerbo Mohamed Seynou Raguilnaba Ouedraogo
Citations: 1(Details)
Microstructure and Properties Characterization of WC-Co-Cr Thermal Spray Coatings ,JMMCE,Vol.6 No.4, 2018
Karla Ofelia Méndez-Medrano Cecilio Jesús Martínez-González Francisco Alvarado-Hernández Omar Jiménez Víctor Hugo Baltazar-Hernández Haideé Ruiz-Luna
Citations: 1(Details)
Characterization by Thermogravimetric Analysis of Polymeric Concrete with High Density Polyethylene Mechanically Recycled ,JMMCE,Vol.2 No.4, 2014
Alma Delia Rodríguez Martínez Martha Lilia Domínguez Patiño Rosa Maria Melgoza Alemán Gerardo Antonio Rosas Trejo
Citations: 1(Details)
Characterization and Application of Naturally Occurring Mineral Based Pigment in Surface Coating ,JMMCE,Vol.11 No.11, 2012
Shweta Umale Prakash Mahanwar
Citations: 1(Details)
Computational Approach to Modelling Fracture Behaviour of Polypropylene/Talc Composites ,JMMCE,Vol.11 No.8, 2012
Chinedum Ogonna Mgbemena ObuoraAnozie Okoye
Citations: 1(Details)
Kinetics Growth and Oxidation Resistance of Aluminide Coatings Deposited by the CVD Method on Re 80 Superalloy ,JMMCE,Vol.11 No.8, 2012
Marek Goral Maciej Pytel Kamil Dychton Andrzej Nowotnik
Citations: 1(Details)
Comparative Beneficiation Study of Gyel Columbite Ore Using Double Stage (Magnetic-to-Magnetic and Magnetic-to-Gravity) Separation Techniques ,JMMCE,Vol.4 No.2, 2016
Oladunni Oyelola Alabi Shehu Aliyu Yaro George Thomas Dungka Ferdinand Asuke Binta Hassan
Citations: 1(Details)
Influence of Blasting Parameters and Density of Rocks on Blast Performance at Tschudi Mine, Tsumeb, Namibia ,JMMCE,Vol.5 No.6, 2017
Martin Itoolwa Kulula Maria Ndeapo Nashongo Jide Muili Akande
Citations: 1(Details)
Synthesis and Thermoelectric Property of 1D Flexible PEDOT: p-TSA/Glass Fiber ,JMMCE,Vol.6 No.3, 2018
Xiaohua Chen Guangshi Tang Junqing Pan Hanfu Wang
Citations: 1(Details)
The Influence of Heat Treatment on the Caustic Etching Behaviour of the Automotive AA6111 Alloy ,JMMCE,Vol.4 No.6, 2016
Abdelhadi Abouarkoub George Thompson Xiaorong Zhou Geoffrey Scamans
Citations: 1(Details)
The Study of the Antimicrobial Properties of Selected Engineering Materials’ Surfaces ,JMMCE,Vol.2 No.2, 2014
Olawale Samuel Fatoba David Ehigie Esezobor Olaitan Lukman Akanji Abiodun Joseph Fatoba Damilola Macgregor John Etubor
Citations: 1(Details)
Role of Metallurgy in the Localized Corrosion of Carbon Steel ,JMMCE,Vol.6 No.6, 2018
Recep Avci Bret H. Davis Nathaniel Rieders Kilean Lucas Manjula Nandasiri Dave Mogk
Citations: 1(Details)
 
 
Top